#826 Le 05/11/2006, à 18:49
- Jonny_the_dog
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Une dernière chose, que je viens de découvrir par hasard.
Le fait que je soit sur le secteur ou sur la baterie influe sur la commande
Sur secteur : 15 fps
Sur baterie : 500fps
C'est vraiment normal ce genre de truc ???
Hors ligne
#827 Le 05/11/2006, à 18:50
- mr_pouit
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
glxgear c'est pour tester l'opengl de ta carte
enfin, une très petite portion des fonctions opengl 
Jonny_the_dog > oui, car justement, glxgears utilise "beaucoup trop" le processeur principal (pas celui de la carte graphique). Et vu que lorsque tu es sur batterie, le processeur abaisse sa fréquence, les résultats sont plus faibles.
Dernière modification par mr_pouit (Le 05/11/2006, à 18:52)
Hors ligne
#828 Le 05/11/2006, à 18:57
- Jonny_the_dog
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Non, moi c'est l'inverse, le fps augmente sur batterie, et il est a l'agonie sur le secteur.
Je vait devenir fou
Hors ligne
#829 Le 05/11/2006, à 19:01
- mr_pouit
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
arg 
j'ai mal regardé. C'est très fort en effet 
Hors ligne
#830 Le 05/11/2006, à 19:02
- nnk
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
nnk a écrit :glxgear c'est pour tester l'opengl de ta carte
enfin, une très petite portion des fonctions opengl
Vi bien sûr, pour afficher 3 roues qui tournent :]
--> Jonny_the_dog : ben c'est clair, c'est bien galère mais hésites pas à retester car tu vois tout ce week end je viens de le passer sur mon Athlon 64 fixe, et pouf un moment ca marche... courage, si tu vois que ca vas pas, prends un Picon Bière (mais fais le viking tu vois genre 50/50)
edit : l'abus d'alcool ... tout ca, ne commencez pas !
Dernière modification par nnk (Le 05/11/2006, à 19:03)
Une Chimay bleue, un pc sous Linux, et du Slayer.. la vraie vie quoi :]
Have fun.
Hors ligne
#831 Le 05/11/2006, à 19:06
- Jonny_the_dog
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Oki, En tous cas sa fait chaud au coeur de voir que vous avez passer du temps a eesayer de ressoudre mon probleme. Tout n'est pas perdu, meme si sa marche po tout a fais, j'ai appris touplein de truc sur le serveur X.
Ps : pour la biere, j'y cour , j'y vole...
Hors ligne
#832 Le 05/11/2006, à 19:24
- nnk
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Clair, ça fait 4 jours que j'ai découvert Kubuntu et je me sens déjà bien dans cette communauté, y'a toujours des gens pour aider, alors bon si je peut participer ...
Une Chimay bleue, un pc sous Linux, et du Slayer.. la vraie vie quoi :]
Have fun.
Hors ligne
#833 Le 05/11/2006, à 20:00
- lomath
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Avant de poster, je voudrai déjà vous remercier pour se post, j'ai réussi à avoir ce qu'il fallait sur glxinfo | grep rendering avec Yes, fglrxinfo qui me donne :
display : :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon X1600 Generic
OpenGL version string: 2.0.6119 (8.30.3)
une fois installé, beryl et emerald comme ceci :
Installation de Beryl et Emerald
1.
Installez les paquets pour Beryl :
sudo apt-get install beryl beryl-core beryl-plugins beryl-plugins-data beryl-settings beryl-manager
2.
Installez les paquets pour Emerald :
sudo apt-get install emerald emerald-themes
3.
Vous pouvez maintenant lancer Beryl à l'aide de cette commande :
beryl-managerLorsque je lance beryl-manager ... voici le resultat :
XGL absent, checking for NVIDIA
Nvidia Absent, assuming AIGLX
beryl: SmcOpenConnection failed : Authentification Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
beryl: No composite extension
Où est mon erreur ? (surtout le Nvidia qui ressort qui me fait peur)
Je vous remercie d'avance ( j'étais pourtant tellement content d en etre arrivé là 
)
Hors ligne
#834 Le 05/11/2006, à 20:24
- nnk
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Alors là je suis mais alors nul pour Beryl et tout ca, mais hum faut pas installer XGL/AIXGL avant ?
comme Beryl s'appuie là dessus, enfin bon je mélange ptet ...
Une Chimay bleue, un pc sous Linux, et du Slayer.. la vraie vie quoi :]
Have fun.
Hors ligne
#835 Le 05/11/2006, à 20:28
- lexdu
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
t'as rajouté ça à la fin de ton fichier xorg.conf ?
Section "Extensions"
Option "Composite" "disable"
EndSection
Si tu cherches une dent de fourmi dans un sac de sable, trouve d'abord le sac de sable !
Portable Asus U80v + Lucid Lynx 64bits… dans la chaleur Guyanaise
[Ubuntu User #1358] [Membre du club des beaux Ubunteros]
Hors ligne
#836 Le 06/11/2006, à 09:39
- lomath
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Oui je l'avais rajouté et en effet il fallait installer aussi XGL ... mais j'ai toujours des problèmes, pour pas poluer le post j'ai créé un nouveau avec mes nouveaux problèmes ici :
http://forum.ubuntu-fr.org/viewtopic.php?id=74685
Encore merci 
Hors ligne
#837 Le 06/11/2006, à 13:39
- GanGanZh
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
bonjour a tous,
alors voila j'avais essayé y a quelques mois d'installer et de configurer mon portable pour avoir la 3D et je n'avais pas reussi, je suis sous drapper 6.06 mon portable est un portable dell 6400 avec une ati X1400 j'aimerai avoir vos avis dois je installer les driver proprietaire ou les drivers libre pour avoir une chance que ca fonctionne.
voici deux trois info sur mon systeme:
fglrxinfo me donne :
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)
lsmod | grep fglrx
ne me donne rien, dans /etc/modules il est en premier
fglrx-control, xorg-driver-fglrx, xorg-driver-fglrx-dev sont installés
glxinfo | grep render me donne :
direct rendering: No
GLX_ATI_render_texture
OpenGL renderer string: Mesa GLX Indirect
fgl_glxgears me dit :
Using GLX_SGIX_pbuffer
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 143 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 32
Current serial number in output stream: 32
le linux-image du kernel que j'utilise est installé aussi : 2.6.15-27
merci pour vos info
bonne aprem a tous
#838 Le 06/11/2006, à 14:11
- enrael
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
bonjour a tous,
Voila je suis un "petit nouveau" dans la communauté ubuntu. J ai décider de passer sur linux recemment et je m eclate comme un ti fou dessus... vos forums m ont beaucoup aider... mais là je suis obliger de poster apres une 15aine de reinstall et de recherche :
Mon souci est le suivant :
Je possede une ATI Radeon 9800SE, tous les pilotes semble bien installer :
FGLRXINFO :
enrael@Skippy:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9800 SE Generic
OpenGL version string: 2.0.6119 (8.30.3)
Panneau de control ATI :
Display Driver version : 8.30.03
OpenGl version : 2.0.6119 (8.30.3)
GLXGEARS :
enrael@Skippy:~$ glxgears -printfps
1210 frames in 5.0 seconds = 241.912 FPS
1250 frames in 5.0 seconds = 249.997 FPS
1250 frames in 5.0 seconds = 249.998 FPS
1250 frames in 5.0 seconds = 249.998 FPS
1250 frames in 5.0 seconds = 249.997 FPS
1248 frames in 5.0 seconds = 249.598 FPS
FGL_GLXGEARS :
enrael@Skippy:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
1836 frames in 5.0 seconds = 367.200 FPS
2174 frames in 5.0 seconds = 434.800 FPS
2316 frames in 5.0 seconds = 463.200 FPS
2305 frames in 5.0 seconds = 461.000 FPS
2322 frames in 5.0 seconds = 464.400 FPS
2285 frames in 5.0 seconds = 457.000 FPS
Mais apparemment je n est pas d acceleration 3d... (ce que dit le test de cedega)
a votre avis d où cela peux t il venir?
Hors ligne
#839 Le 06/11/2006, à 14:39
- lexdu
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
que te donne glxinfo |grep rendering ?
Si tu cherches une dent de fourmi dans un sac de sable, trouve d'abord le sac de sable !
Portable Asus U80v + Lucid Lynx 64bits… dans la chaleur Guyanaise
[Ubuntu User #1358] [Membre du club des beaux Ubunteros]
Hors ligne
#840 Le 06/11/2006, à 14:42
- enrael
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
la commande me donne :
enrael@Skippy:~$ glxinfo | grep rendering
direct rendering: Yes
mais en regardant le log s xorg j ai ca :
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
ca te parle?
plus simple le log xorg :
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux Skippy 2.6.17-10-generic #2 SMP Fri Oct 13 18:45:35 UTC 2006 i686
Build Date: 07 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 6 13:51:00 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/,
/usr/share/fonts/X11/OTF,
/usr/share/fonts/X11/Type1/,
/usr/share/fonts/X11/CID/,
/usr/share/fonts/X11/100dpi/,
/usr/share/fonts/X11/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 147b,1c00 rev a2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 147b,1c00 rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 147b,1c00 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 147b,1c00 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 147b,1c00 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 147b,1c00 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 147b,1c00 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 147b,1c00 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:0d:0: chip 10de,006e card 147b,1c00 rev a3 class 0c,00,10 hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 01:07:0: chip 1102,0002 card 1102,8066 rev 0a class 04,01,00 hdr 80
(II) PCI: 01:07:1: chip 1102,7002 card 1102,0020 rev 0a class 09,80,00 hdr 80
(II) PCI: 01:09:0: chip 1814,0201 card 1458,e932 rev 01 class 02,80,00 hdr 00
(II) PCI: 02:00:0: chip 1002,4148 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,4168 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x0000afff (0x2000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(--) PCI:*(2:0:0) ATI Technologies Inc R350 AH [Radeon 9800] rev 0, Mem @ 0xd0000000/27, 0xe5000000/16, I/O @ 0xb000/8
(--) PCI: (2:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800] (Secondary) rev 0, Mem @ 0xd8000000/27, 0xe5010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe7000000 - 0xe7001fff (0x2000) MX[b]
[1] -1 0 0xe8004000 - 0xe800403f (0x40) MX[b]
[2] -1 0 0xe8003000 - 0xe80037ff (0x800) MX[b]
[3] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[b]
[4] -1 0 0xe8006000 - 0xe80060ff (0x100) MX[b]
[5] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[b]
[6] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00009400 - 0x00009407 (0x8) IX[b]
[11] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
[12] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[13] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[14] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[b]
[15] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[b](B)
[1] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe7000000 - 0xe7001fff (0x2000) MX[b]
[1] -1 0 0xe8004000 - 0xe800403f (0x40) MX[b]
[2] -1 0 0xe8003000 - 0xe80037ff (0x800) MX[b]
[3] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[b]
[4] -1 0 0xe8006000 - 0xe80060ff (0x100) MX[b]
[5] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[b]
[6] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
[9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00009400 - 0x00009407 (0x8) IX[b]
[11] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
[12] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[13] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[14] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[b]
[15] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[b](B)
[1] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe7000000 - 0xe7001fff (0x2000) MX[b]
[5] -1 0 0xe8004000 - 0xe800403f (0x40) MX[b]
[6] -1 0 0xe8003000 - 0xe80037ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[b]
[8] -1 0 0xe8006000 - 0xe80060ff (0x100) MX[b]
[9] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[b]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[b](B)
[15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00009400 - 0x00009407 (0x8) IX[b]
[19] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[21] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[22] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[b]
[23] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.30.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) Wacom driver level: 47-0.7.2 $
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56),
RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49),
RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300/X550 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON X300 (M22 5461),
MOBILITY RADEON X600 SE (M24 5462), MOBILITY FireGL V3100 (M22 5464),
RADEON X600/X550 Series (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), FireMV 2400 (RV380 3151),
MOBILITY RADEON X300 (M22 3152), MOBILITY FireGL V3200 (M24 3154),
RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49),
RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B),
RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D),
MOBILITY RADEON 9800 (M18 4A4E), RADEON X800 SE (R420 4A4F),
RADEON X800 XT Platinum Edition (R420 4A50),
RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548),
RADEON X800 GTO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D),
RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X800 GTO (R480 5D4F), FireGL V7200 (R480 5D50),
RADEON X850 XT (R480 5D52), RADEON X850 (R481 4B48),
RADEON X850 XT (R481 4B49), RADEON X850 SE (R481 4B4A),
RADEON X850 PRO (R481 4B4B),
RADEON X850 XT Platinum Edition (R481 4B4C),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), RADEON X700 XT (RV410 5E4A),
RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
RADEON X700 (RV410 5E4D), RADEON X700/X550 Series (RV410 5E4F),
MOBILITY RADEON X700 (M26 5652), MOBILITY RADEON X700 (M26 5653),
MOBILITY RADEON X700 XL (M26-XC 564F),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62),
RADEON X1800 (R520 7100), MOBILITY RADEON X1800 XT (M58 7101),
MOBILITY RADEON X1800 (M58 7102), MOBILITY FireGL V7200 (M58 7103),
FireGL V7200 (R520 7104), FireGL V5300 (R520 7105),
MOBILITY FireGL V7100 (M58 7106), RADEON X1800 Series (R520 7108),
RADEON X1800 Series (R520 7109), RADEON X1800 Series (R520 710A),
RADEON X1800 Series (R520 710B), RADEON X1800 Series (R520 710C),
FireGL V7300 (R520 710E), FireGL V7350 (R520 710F),
RADEON X1300 PRO (RV505 7143), RADEON X1300 (RV505 7147),
MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C),
RADEON X1300 Series (RV505 715F), RADEON X1600 Series (RV515 7140),
RADEON X1300 Series (RV515 7142), MOBILITY FireGL (M54 GL 7144),
MOBILITY RADEON X1400 (M54 7145), RADEON X1300 Series (RV515 7146),
MOBILITY RADEON X1300 (M52 7149), MOBILITY RADEON X1300 (M52 714A),
RADEON X1300 Series (RV515 714D), RADEON X1300 Series (RV515 714E),
FireGL V3300 (RV515 7152), RADEON X1300 Series (RV515 715E),
RADEON X1300 (RV516 7180), RADEON X1600 Series (RV516 7181),
RADEON X1300 (RV516 7183), MOBILITY RADEON X1450 (M64P 7186),
RADEON X1300 (RV516 7187), MOBILITY RADEON X1350 (M62P 718B),
MOBILITY RADEON X1350 (M62CSP 718C),
MOBILITY RADEON X1450 (M64CSP 718D),
MOBILITY RADEON X1350 (M62S 7196), RADEON X1900 (R580 7240),
RADEON X1900 (R580 7243), RADEON X1900 (R580 7244),
RADEON X1900 (R580 7245), RADEON X1900 (R580 7246),
RADEON X1900 (R580 7247), RADEON X1900 (R580 7248),
RADEON X1900 (R580 7249), RADEON X1900 (R580 724A),
RADEON X1900 (R580 724B), RADEON X1900 (R580 724C),
RADEON X1900 (R580 724D), FireStream 2U (R580 724E),
FireStream 2U (R580 724F), RADEON X1600 Series (RV530 71C0),
RADEON X1600 Series (RV530 71C2), MOBILITY FireGL V5200 (M56 71C4),
MOBILITY RADEON X1600 (M56 71C5),
RADEON X1650 Series (RV530 XT2 71C6),
RADEON X1300 Series (RV530 PRO2 71CE), FireGL V3400 (RV530 71D2),
MOBILITY RADEON X1700 (M66-XT 71D6), FireGL V5200 (RV530 71DA),
RADEON X1600 Series (RV530 SE 71DE), RADEON Xpress 1200 (RS600 7941),
RADEON Xpress 1200 (RS600 7942)
(II) Primary Device is: PCI 02:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.30.3
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.30g1
(II) ATI Proprietary Linux Driver Build Date: Oct 26 2006 08:05:19
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.30.1.1.2.3-driver-lnx-x86-x86_64-302518
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset RADEON 9800 SE (R350 4148) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe7000000 - 0xe7001fff (0x2000) MX[b]
[5] -1 0 0xe8004000 - 0xe800403f (0x40) MX[b]
[6] -1 0 0xe8003000 - 0xe80037ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[b]
[8] -1 0 0xe8006000 - 0xe80060ff (0x100) MX[b]
[9] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[b]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[b](B)
[15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00009400 - 0x00009407 (0x8) IX[b]
[19] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[21] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[22] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[b]
[23] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81df750
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe7000000 - 0xe7001fff (0x2000) MX[b]
[5] -1 0 0xe8004000 - 0xe800403f (0x40) MX[b]
[6] -1 0 0xe8003000 - 0xe80037ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[b]
[8] -1 0 0xe8006000 - 0xe80060ff (0x100) MX[b]
[9] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[b]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
[13] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[b](B)
[15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00009400 - 0x00009407 (0x8) IX[b]
[22] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[24] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[25] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[b]
[26] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 2 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9800 SE (R350 4148)" (Chipset = 0x4148)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe5000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R350
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R350
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.30.3
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AOC Model: a770 Serial#: 633493
(II) fglrx(0): Year: 2000 Week: 29
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608
(II) fglrx(0): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Ranges: V min: 50 V max: 130 Hz, H min: 30 H max: 70 kHz,
(II) fglrx(0): Monitor name: AOC A770
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 310 x 240 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 78.8 MHz Image Size: 310 x 240 mm
(II) fglrx(0): h_active: 1024 h_sync: 1040 h_sync_end 1136 h_blank_end 1312 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800 v_border: 0
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Connected Display2: TV on TVDAC [tv]
(II) fglrx(0): Display2: No EDID information from DDC.
(II) fglrx(0): Derived EDID from BIOS and internal tables for Display2:
(II) fglrx(0): Display2 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PNP Model: 9fe Serial#: 0
(II) fglrx(0): Year: 1990 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:
(II) fglrx(0): Max H-Image Size [cm]: H-Size may change, V-Size may change
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000
(II) fglrx(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): End of Display2 EDID data --------------------
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Secondary Controller - TV on TVDAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 39 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): *Mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.17 800 848 936 1072 600 601 604 636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480" 52.40 640 680 744 848 480 481 484 515 +hsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) fglrx(0): Total of 12 modes found for secondary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1024x768": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 42.95 1024 2320 2336 2730 768 483 485 525 interlace
(**) fglrx(0): *Mode "1024x480": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "1024x480" 42.95 1024 2320 2336 2730 480 483 485 525 interlace
(**) fglrx(0): *Mode "848x480": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "848x480" 42.95 848 2320 2336 2730 480 483 485 525 interlace
(**) fglrx(0): *Mode "800x600": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 42.95 800 2320 2336 2730 600 483 485 525 interlace
(**) fglrx(0): *Mode "720x576": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "720x576" 42.95 720 2320 2336 2730 576 483 485 525 interlace
(**) fglrx(0): *Mode "720x480": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "720x480" 42.95 720 2320 2336 2730 480 483 485 525 interlace
(**) fglrx(0): *Mode "640x480": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "640x480" 42.95 640 2320 2336 2730 480 483 485 525 interlace
(**) fglrx(0): Default mode "640x400": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "640x400" 42.95 640 2320 2336 2730 400 483 485 525 interlace
(**) fglrx(0): Default mode "512x384": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "512x384" 42.95 512 2320 2336 2730 384 483 485 525 interlace
(**) fglrx(0): Default mode "400x300": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "400x300" 42.95 400 2320 2336 2730 300 483 485 525 interlace
(**) fglrx(0): Default mode "320x240": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "320x240" 42.95 320 2320 2336 2730 240 483 485 525 interlace
(**) fglrx(0): Default mode "320x200": 43.0 MHz (scaled from 0.0 MHz), 15.7 kHz, 60.0 Hz (I)
(II) fglrx(0): Modeline "320x200" 42.95 320 2320 2336 2730 200 483 485 525 interlace
(--) fglrx(0): Display dimensions: (320, 240) mm
(--) fglrx(0): DPI set to (101, 108)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): *Mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600" 68.17 800 848 936 1072 600 601 604 636 +hsync
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480" 52.40 640 680 744 848 480 481 484 515 +hsync
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe5000000 - 0xe500ffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xe7000000 - 0xe7001fff (0x2000) MX[b]
[7] -1 0 0xe8004000 - 0xe800403f (0x40) MX[b]
[8] -1 0 0xe8003000 - 0xe80037ff (0x800) MX[b]
[9] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[b]
[10] -1 0 0xe8006000 - 0xe80060ff (0x100) MX[b]
[11] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[b]
[12] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[b]
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[14] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[b](B)
[15] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[16] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[b](B)
[17] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[21] 0 0 0x0000b000 - 0x0000b0ff (0x100) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x00009400 - 0x00009407 (0x8) IX[b]
[25] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
[26] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[27] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[b]
[28] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[b]
[29] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): UMM Bus area: 0xd0701000 (size=0x078ff000)
(II) fglrx(0): UMM area: 0xd0701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:2:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:2:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7f4b000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.30.3
(II) fglrx(0): Date: Oct 26 2006
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.17-10-generic
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): [agp] Mode=0x1f00421b bridge: 0x10de/0x01e0
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f00431a
(II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xe0000000)
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): [drm] texture shared area handle = 0x00008000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x00701000
(II) fglrx(0): Splitting WC range: base: 0xd0000000, size: 0x701000
(II) fglrx(0): Splitting WC range: base: 0xd0400000, size: 0x301000
(II) fglrx(0): Splitting WC range: base: 0xd0600000, size: 0x101000
(==) fglrx(0): Write-combining range (0xd0700000,0x1000)
(==) fglrx(0): Write-combining range (0xd0600000,0x101000)
(==) fglrx(0): Write-combining range (0xd0400000,0x301000)
(==) fglrx(0): Write-combining range (0xd0000000,0x701000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 410
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): Interrupt handler installed at IRQ 209.
(II) fglrx(0): Exposed events to the /proc interface
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:2:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:2:0:0
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
error opening security policy file /usr/lib/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Generic Keyboard: XkbLayout: "fr"
(**) Option "XkbOptions" "lv3:ralt_switch"
(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+fr+level3(ralt_switch)" };
xkb_geometry { include "pc(pc105)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : Invalid argument
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
et mon xorg.conf :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorgSection "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSectionSection "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSectionSection "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSectionSection "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSectionSection "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSectionSection "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSectionSection "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSectionSection "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionSection "DRI"
Mode 0666
EndSectionSection "Extensions"
Option "Composite" "Disable"
EndSection
Dernière modification par enrael (Le 06/11/2006, à 14:48)
Hors ligne
#841 Le 08/11/2006, à 16:04
- aa37
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Neophyte en Linux, je suis tente d'installer Ubuntu.
J'ai un Dell Inspiron 6400 (comme GanGanZH ci-dessus) avec une carte ATI Mobility Radeon X1400. Tout comme avec la distribution Mandriva PowerPack 2006 precedemment, je me heurte a une definition graphique nettement insuffisante et des images deformees. Chez Mandriva, on n'a jamais cru bon de repondre a mes questions, contrairement a ce que proclament les documents de la distribution. J'essaie donc Ubuntu - On m'a dit que c'etait une distribution tres orientee "utilisateurs qui ne veulent pas se prendre excessivement la tete".
J'ai passe pas mal de temps a lire les messages postes sur ce forum, sur cette question et je ne comprends pas les reponses. Pratiquement et simplement, comment faire reconnaitre ma carte graphique? Pour le moment, j'utilise le Live CD, et ferai ma migration definitive lorsque je serai sur de pouvoir produire proprement.
J'espere que quelqu'un aura la patience de trouver des mots justes et simples, et non de ce jargon incomprehensible et rebutant pour les debutants.
Merci d'avance
A. ANDRE
----------------------------------
Toshiba Satellite Pro U400 - T 3400 - Ubuntu 12.04 - 4 GB DDR3 - HDD 500 GB
ASUS N53J - I7.740QM - amd64 - Ubuntu 12.10 - 14 GB DDR3 - HDD 500 GB
Hors ligne
#842 Le 08/11/2006, à 23:47
- aa37
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Bonsoir a tous,
J'ai localise le fichier xorg.conf, mais apparemment, je ne dispose pas des droits de modification.
Je rappelle que j'utilise pour le moment le Live CD. J'ai l'intention de quitter MS Windows des que j'aurai resolu mes problemes de carte graphique ATI Mobility Radeon X1400, mais pour le moment, Windows la reconnait et me permet de travailler.
J'ai lu que plusieurs d'entre vous ont egalement un Dell Inspiron 6400 equipe de cette carte. Avez-vous pu resoudre vos problemes d'installation d'un pilote efficace?
Merci
Dernière modification par aa37 (Le 09/11/2006, à 07:55)
A. ANDRE
----------------------------------
Toshiba Satellite Pro U400 - T 3400 - Ubuntu 12.04 - 4 GB DDR3 - HDD 500 GB
ASUS N53J - I7.740QM - amd64 - Ubuntu 12.10 - 14 GB DDR3 - HDD 500 GB
Hors ligne
#843 Le 09/11/2006, à 00:38
- lexdu
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Tu ne pourras rien faire concret à partir du liveCD.
Crée-toi 2 partitions (1 swap et 1 pour / ) et installe Ubuntu en parallèle de Windows.
C'est le seul moyen que tu as de pouvoir tester vraiment ton matériel "exotique" que le liveCD ne prend pas en charge comme tu le souhaites.
Cependant, as-tu vraiment besoin de la 3D ? C'est tout ce qu'apporte réellement le pilote propriétaire
Dernière modification par lexdu (Le 09/11/2006, à 00:39)
Si tu cherches une dent de fourmi dans un sac de sable, trouve d'abord le sac de sable !
Portable Asus U80v + Lucid Lynx 64bits… dans la chaleur Guyanaise
[Ubuntu User #1358] [Membre du club des beaux Ubunteros]
Hors ligne
#844 Le 09/11/2006, à 07:52
- aa37
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Merci de votre réponse.
1. C'est vrai que je n'ai pas besoin de la 3D, mais il me semble que les drivers appropriés apportent certainement quelque chose de plus. Sous Windows, une mire photo a son apparence normale de référence. Avec le pilote générique chargé avec Edgy Eft, mon image est étirée dans le sens de la largeur.
2. Il y a quelques mois j'avais acquis et installé une distribution Mandriva PowerPack 10.2 (2006) et installée en parallèle avec Windows. Coincidence ou pas de chance, quelques jours plus tard, impossible de rebooter aucun des deux systèmes. A la hotline de DELL, on m'a indiqué que LILO avait détruit le MBR et on m'a remplacé mon disque dur au titre de la garantie. Je n'ai pas envie que ça recommence. J'ai besoin quotidiennement d'une machine où mes applications soient disponibles.
Je vais peser le pour et le contre. Bonne journée
A. ANDRE
----------------------------------
Toshiba Satellite Pro U400 - T 3400 - Ubuntu 12.04 - 4 GB DDR3 - HDD 500 GB
ASUS N53J - I7.740QM - amd64 - Ubuntu 12.10 - 14 GB DDR3 - HDD 500 GB
Hors ligne
#845 Le 09/11/2006, à 10:42
- lexdu
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Merci de votre réponse.
1. C'est vrai que je n'ai pas besoin de la 3D, mais il me semble que les drivers appropriés apportent certainement quelque chose de plus. Sous Windows, une mire photo a son apparence normale de référence. Avec le pilote générique chargé avec Edgy Eft, mon image est étirée dans le sens de la largeur.
Si ce n'est que ça ton problème, alors ça se règle dans le fichier de configuration xorg.conf. Ceci étant sûrement dû à une mauvaise reconnaissance automatique de ton écran.
Vérifie quand même que le pilote lancé automatiquement est bien ati ou radeon (via la commande lsmod. Il me semble que pour la série des ATI X1.. c'est en mode VESA que se lance X avec le liveCD et je ne sais pas comment se comporte réellement, suite à une installation, le pilote radeon libre avec ce genre de carte.
Si l'on pouvait bénéficier d'un retour d'expérience ce serait sympa.
Merci
Si tu cherches une dent de fourmi dans un sac de sable, trouve d'abord le sac de sable !
Portable Asus U80v + Lucid Lynx 64bits… dans la chaleur Guyanaise
[Ubuntu User #1358] [Membre du club des beaux Ubunteros]
Hors ligne
#846 Le 09/11/2006, à 11:33
- aa37
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Rassure-toi pour le retour d'experience. Je le considere comme un devoir, y compris le fruit de mes recherches personnelles. C'est, je crois, l'esprit meme du logiciel libre.
J'ai verifie un certain nombre de details de xorg.conf. C'est bien le pilote VESA qui est designe par defaut mais je n'ai pas les autorisations de modifications. Pour revenir a ta proposition, je vais proceder aux backups necessaires avant d'installer Ubuntu Edgy Eft sur mon disque dur. Si je ne trouve pas de solution, je serai quitte pour passer une journee a reinstaller Windows et mes logiciels habituels.
Desole pour l'absence des accents. Mon portable a un clavier UK et la version Live CD ne les prend pas en charge, quelque soit la configuration de clavier que j'annonce a l'initialisation.
Merci de ton aide, bonne journee et a bientot
A. ANDRE
----------------------------------
Toshiba Satellite Pro U400 - T 3400 - Ubuntu 12.04 - 4 GB DDR3 - HDD 500 GB
ASUS N53J - I7.740QM - amd64 - Ubuntu 12.10 - 14 GB DDR3 - HDD 500 GB
Hors ligne
#847 Le 09/11/2006, à 16:52
- Trantor
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Bonjour a tous
encore bravo pour ce magnifique tuto 
Apres quelque galere voici mes resultat sous fgl_glxgears et sous glxgears
fgl_glxgears
Using GLX_SGIX_pbuffer
8240 frames in 5.0 seconds = 1648.000 FPS
10301 frames in 5.0 seconds = 2060.200 FPS
10289 frames in 5.0 seconds = 2057.800 FPS
10291 frames in 5.0 seconds = 2058.200 FPS
10310 frames in 5.0 seconds = 2062.000 FPS
10317 frames in 5.0 seconds = 2063.400 FPS
10302 frames in 5.0 seconds = 2060.400 FPS
10297 frames in 5.0 seconds = 2059.400 FPS
10287 frames in 5.0 seconds = 2057.400 FPS
glxgears
55508 frames in 5.0 seconds = 11101.587 FPS
55474 frames in 5.0 seconds = 11094.756 FPS
55471 frames in 5.0 seconds = 11094.071 FPS
55469 frames in 5.0 seconds = 11093.792 FPS
55471 frames in 5.0 seconds = 11094.193 FPS
55471 frames in 5.0 seconds = 11094.198 FPS
55294 frames in 5.0 seconds = 11058.741 FPS
55285 frames in 5.0 seconds = 11056.825 FPS
CPU : Athlon 64 3700+ (o/c @ 2.8Ghz)
RAM : G.Skill PC4000 (2x1024Mo) (3-3-2-8 1T)
Carte Graphique : Powercolor X1900XTX 512Mo avec les pilotes 8.25.18
Je m'en vais de ce pas tester UT2004
#848 Le 09/11/2006, à 17:24
- Trantor
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
c'est encore moi, ca marche pas mal mais bon pas aussi optimiser que sous windows.
++ et longue vie a ubuntu
#849 Le 09/11/2006, à 18:38
- lexdu
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Normal vu la vieille version des pilotes que tu utilises
Cinq versions sont sorties depuis... il y a peut être eu des améliorations
Si tu cherches une dent de fourmi dans un sac de sable, trouve d'abord le sac de sable !
Portable Asus U80v + Lucid Lynx 64bits… dans la chaleur Guyanaise
[Ubuntu User #1358] [Membre du club des beaux Ubunteros]
Hors ligne
#850 Le 09/11/2006, à 19:04
- Trantor
Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon
Oui j'ai bien vu mais comment faire pour mettre la derniere version ? Quel paquage doit-je mettre à jour ?