Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#176 Le 16/07/2005, à 13:50

rezzakilla

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Je passais par là, et je voulais également dire que la communauté UBUNTU ben ça rox, merci pour ce tuto !!! lol:D

Hors ligne

#177 Le 17/07/2005, à 11:31

Thingy

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour,

Merci beaucoup pour ce tutorial qui m'a été très utile smile

Surtout que j'ai du recourir à la 2e solution (AGPGART externe)

Voici ma config et les résultats:

Athlon XP 2400 +
1 Go DDRAM
Radeon 9700 Pro 128 Mo Bios 8.04
Drivers version 8.08.25

glxgears: ~ 2665 FPS
fgl_glxgears: ~ 538 FPS

Encore merci et A ++

#178 Le 22/07/2005, à 03:14

alta_ir

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

oyo!

Merci pour le tuto big_smile

j'ai du recourir à la deuxième solution car la commande fgl_glxgears ne fonctionnait pas avec la première solution.

voici ma config
ati radeon 9200SE (version driver : 8.08.25)
Asus a7n8x-x
512 mo
xp 2400+

altair@starnight:~$ glxgears
2536 frames in 5.0 seconds = 507.200 FPS
2747 frames in 5.0 seconds = 549.400 FPS
2651 frames in 5.0 seconds = 530.200 FPS
2648 frames in 5.0 seconds = 529.600 FPS
2651 frames in 5.0 seconds = 530.200 FPS
2651 frames in 5.0 seconds = 530.200 FPS
2650 frames in 5.0 seconds = 530.000 FPS

altair@starnight:~$ fgl_glxgears
476 frames in 5.0 seconds = 95.200 FPS
576 frames in 5.0 seconds = 115.200 FPS
574 frames in 5.0 seconds = 114.800 FPS
589 frames in 5.0 seconds = 117.800 FPS
570 frames in 5.0 seconds = 114.000 FPS

Hors ligne

#179 Le 22/07/2005, à 13:53

Kagou

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Suis super content de voir tous ces gens heureux cool wink big_smile


«black-out» du Net français

http://www.laquadrature.net/HADOPI

Hors ligne

#180 Le 23/07/2005, à 15:33

Passe

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Content de voir que le driver arrive à tourner correctement sur différents types de machines.

Chez moi ça ne tourne malheureusement pas.

J'ai un Asus V6VA20, il s'agit d'un laptop ayant une radeon X600 en PCI-Express avec 64Mo de ram dédiée.

J'ai d'abord voulu essayer d'installer le driver d'ati ubuntu's way, mais je me suis heurté à des pb avec mtrr. Bref, j'ai refais un noyau perso, pour les options impactant directement la carte je me suis basé sur le howto de gentoo : http://gentoo-wiki.com/HOWTO_ATI_Drivers

Il est à noter que ce laptop possède 1Go de ram, j'ai donc activé le high memory support.
Je laisse aussi l'ACPI gérer le PCI.

Le driver ATI compile bien et se lance correctement.

Malheureusement je me mange un écran noir au lancement de X, que ce soit en utilisant AGPGART ou le support AGP interne au driver. Le clavier ne repond plus, la machine reste seulement accessible via SSH.

Il semble que ce soit un pb d'allocation de mémoire, mais je sais pas comment le résoudre sad

Voilà les messages intéressants du dmesg :

Jul 23 03:16:10 localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
Jul 23 03:16:10 localhost kernel: agpgart: Detected an Intel 915GM Chipset.
Jul 23 03:16:10 localhost kernel: agpgart: Maximum main memory to use for agp memory: 941M
Jul 23 03:16:10 localhost kernel: agpgart: AGP aperture is 256M @ 0x0
...
Jul 23 16:18:20 localhost kernel: [fglrx] Maximum main memory to use for locked dma buffers: 926 MBytes.
Jul 23 16:18:20 localhost kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 23 16:18:20 localhost kernel: [fglrx] module loaded - fglrx 8.14.13 [Jun  8 2005] on minor 0
Jul 23 16:18:20 localhost kernel: [fglrx] free  PCIe = 54804480
Jul 23 16:18:20 localhost kernel: [fglrx] max   PCIe = 54804480
Jul 23 16:18:20 localhost kernel: [fglrx] free  LFB = 47099904
Jul 23 16:18:20 localhost kernel: [fglrx] max   LFB = 47099904
Jul 23 16:18:20 localhost kernel: [fglrx] free  Inv = 0
Jul 23 16:18:20 localhost kernel: [fglrx] max   Inv = 0
Jul 23 16:18:20 localhost kernel: [fglrx] total Inv = 0
Jul 23 16:18:20 localhost kernel: [fglrx] total TIM = 0
Jul 23 16:18:20 localhost kernel: [fglrx] total FB  = 0
Jul 23 16:18:20 localhost kernel: [fglrx] total PCIe = 16384

Et dans les logs de X.org :

X Window System Version 6.8.2 (Ubuntu 6.8.2-10 20050405154308 root@terranova.warthogs.hbd.com)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.10 i686 [ELF] 
Current Operating System: Linux vif 2.6.10 #1 Sat Jul 23 15:42:59 CEST 2005 i686
Build Date: 05 April 2005
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.10 (root@vif) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Sat Jul 23 15:42:59 CEST 2005 T
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 23 16:18:19 2005
(++) Using config file: "/root/xorg.schiesi_2.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) |-->Input Device "SynapticsMouse0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/local/" does not exist.
        Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dp
i/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "BlankTime" "5"
(**) Option "StandbyTime" "10"
(**) Option "SuspendTime" "20"
(**) Option "OffTime" "30"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.7
        X.Org XInput driver : 0.4
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1043,1882 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1043,1967 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1043,1967 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1043,1967 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1043,1967 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1043,1967 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1043,1915 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 1043,1886 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 1043,1967 rev 04 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1043,1967 rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,3150 card 1043,1881 rev 00 class 03,00,00 hdr 00
(II) PCI: 03:00:0: chip 11ab,4320 card 1043,173c rev 13 class 02,00,00 hdr 00
(II) PCI: 03:01:0: chip 1180,0476 card 4000,0000 rev b3 class 06,07,00 hdr 82
(II) PCI: 03:01:1: chip 1180,0552 card 1043,1967 rev 08 class 0c,00,10 hdr 80
(II) PCI: 03:01:2: chip 1180,0822 card 1043,1967 rev 17 class 08,05,00 hdr 80
(II) PCI: 03:01:3: chip 1180,0592 card 1043,1967 rev 08 class 08,80,00 hdr 80
(II) PCI: 03:01:4: chip 1180,0852 card 1043,1967 rev 03 class 08,80,00 hdr 80
(II) PCI: 03:02:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1  0       0x0000b000 - 0x0000bfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
        [0] -1  0       0xf0000000 - 0xfbefffff (0xbf00000) MX[b]
(II) Bus 1 prefetchable memory range:
        [0] -1  0       0xd0000000 - 0xdeffffff (0xf000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
        [0] -1  0       0x0000c000 - 0x0000c0ff (0x100) IX[b]
        [1] -1  0       0x0000c400 - 0x0000c4ff (0x100) IX[b]
        [2] -1  0       0x0000c800 - 0x0000c8ff (0x100) IX[b]
        [3] -1  0       0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,4), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 3 I/O range:
        [0] -1  0       0x0000d000 - 0x0000d0ff (0x100) IX[b]
        [1] -1  0       0x0000d400 - 0x0000d4ff (0x100) IX[b]
        [2] -1  0       0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [3] -1  0       0x0000dc00 - 0x0000dcff (0x100) IX[b]
        [4] -1  0       0x0000e000 - 0x0000e0ff (0x100) IX[b]
        [5] -1  0       0x0000e400 - 0x0000e4ff (0x100) IX[b]
        [6] -1  0       0x0000e800 - 0x0000e8ff (0x100) IX[b]
        [7] -1  0       0x0000ec00 - 0x0000ecff (0x100) IX[b]
(II) Bus 3 non-prefetchable memory range:
        [0] -1  0       0xfbf00000 - 0xfbffffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (3:1:0), (3,4,7), BCTRL: 0x0583 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x3150) rev 0, Mem @ 0xd0000000/27, 0xf0000000/16, I/O @ 0xb000/8, BIOS @ 0xfbee0000/17
(II) Addressable bus resource ranges are
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[b]
        [1] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [6] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
        [0] -1  0       0xfbff9000 - 0xfbff9fff (0x1000) MX[b]
        [1] -1  0       0xfbffbc00 - 0xfbffbcff (0x100) MX[b]
        [2] -1  0       0xfbffb800 - 0xfbffb8ff (0x100) MX[b]
        [3] -1  0       0xfbffb400 - 0xfbffb4ff (0x100) MX[b]
        [4] -1  0       0xfbffa800 - 0xfbffafff (0x800) MX[b]
        [5] -1  0       0xfbffc000 - 0xfbffffff (0x4000) MX[b]
        [6] -1  0       0xdffff400 - 0xdffff4ff (0x100) MX[b]
        [7] -1  0       0xdffff800 - 0xdffff9ff (0x200) MX[b]
        [8] -1  0       0xdffffc00 - 0xdfffffff (0x400) MX[b]
        [9] -1  0       0xfbee0000 - 0xfbefffff (0x20000) MX[b](B)
        [10] -1 0       0xf0000000 - 0xf000ffff (0x10000) MX[b](B)
        [11] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
        [12] -1 0       0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [13] -1 0       0x00000400 - 0x0000041f (0x20) IX[b]
        [14] -1 0       0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
        [15] -1 0       0x00009000 - 0x0000907f (0x80) IX[b]
        [16] -1 0       0x00009400 - 0x000094ff (0x100) IX[b]
        [17] -1 0       0x00008400 - 0x0000843f (0x40) IX[b]
        [18] -1 0       0x00008800 - 0x000088ff (0x100) IX[b]
        [19] -1 0       0x0000a800 - 0x0000a81f (0x20) IX[b]
        [20] -1 0       0x0000a400 - 0x0000a41f (0x20) IX[b]
        [21] -1 0       0x0000a000 - 0x0000a01f (0x20) IX[b]
        [22] -1 0       0x00009800 - 0x0000981f (0x20) IX[b]
        [23] -1 0       0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0       0xfbff9000 - 0xfbff9fff (0x1000) MX[b]
        [1] -1  0       0xfbffbc00 - 0xfbffbcff (0x100) MX[b]
        [2] -1  0       0xfbffb800 - 0xfbffb8ff (0x100) MX[b]
        [3] -1  0       0xfbffb400 - 0xfbffb4ff (0x100) MX[b]
        [4] -1  0       0xfbffa800 - 0xfbffafff (0x800) MX[b]
        [5] -1  0       0xfbffc000 - 0xfbffffff (0x4000) MX[b]
        [6] -1  0       0xdffff400 - 0xdffff4ff (0x100) MX[b]
        [7] -1  0       0xdffff800 - 0xdffff9ff (0x200) MX[b]
        [8] -1  0       0xdffffc00 - 0xdfffffff (0x400) MX[b]
        [9] -1  0       0xfbee0000 - 0xfbefffff (0x20000) MX[b](B)
        [10] -1 0       0xf0000000 - 0xf000ffff (0x10000) MX[b](B)
        [11] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
        [12] -1 0       0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [13] -1 0       0x00000400 - 0x0000041f (0x20) IX[b]
        [14] -1 0       0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
        [15] -1 0       0x00009000 - 0x0000907f (0x80) IX[b]
        [16] -1 0       0x00009400 - 0x000094ff (0x100) IX[b]
        [17] -1 0       0x00008400 - 0x0000843f (0x40) IX[b]
        [18] -1 0       0x00008800 - 0x000088ff (0x100) IX[b]
        [19] -1 0       0x0000a800 - 0x0000a81f (0x20) IX[b]
        [20] -1 0       0x0000a400 - 0x0000a41f (0x20) IX[b]
        [21] -1 0       0x0000a000 - 0x0000a01f (0x20) IX[b]
        [22] -1 0       0x00009800 - 0x0000981f (0x20) IX[b]
        [23] -1 0       0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [6] -1  0       0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1  0       0xfbff9000 - 0xfbff9fff (0x1000) MX[b]
        [6] -1  0       0xfbffbc00 - 0xfbffbcff (0x100) MX[b]
        [7] -1  0       0xfbffb800 - 0xfbffb8ff (0x100) MX[b]
        [8] -1  0       0xfbffb400 - 0xfbffb4ff (0x100) MX[b]
        [9] -1  0       0xfbffa800 - 0xfbffafff (0x800) MX[b]
        [10] -1 0       0xfbffc000 - 0xfbffffff (0x4000) MX[b]
        [11] -1 0       0xdffff400 - 0xdffff4ff (0x100) MX[b]
        [12] -1 0       0xdffff800 - 0xdffff9ff (0x200) MX[b]
        [13] -1 0       0xdffffc00 - 0xdfffffff (0x400) MX[b]
        [14] -1 0       0xfbee0000 - 0xfbefffff (0x20000) MX[b](B)
        [15] -1 0       0xf0000000 - 0xf000ffff (0x10000) MX[b](B)
        [16] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
        [17] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [18] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [19] -1 0       0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [20] -1 0       0x00000400 - 0x0000041f (0x20) IX[b]
        [21] -1 0       0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
        [22] -1 0       0x00009000 - 0x0000907f (0x80) IX[b]
        [23] -1 0       0x00009400 - 0x000094ff (0x100) IX[b]
        [24] -1 0       0x00008400 - 0x0000843f (0x40) IX[b]
        [25] -1 0       0x00008800 - 0x000088ff (0x100) IX[b]
        [26] -1 0       0x0000a800 - 0x0000a81f (0x20) IX[b]
        [27] -1 0       0x0000a400 - 0x0000a41f (0x20) IX[b]
        [28] -1 0       0x0000a000 - 0x0000a01f (0x20) IX[b]
        [29] -1 0       0x00009800 - 0x0000981f (0x20) IX[b]
        [30] -1 0       0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) LoadModule: "synaptics"
(II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) Module synaptics: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.3
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 6.8.2, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
(II) Module GLcore: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
        compiled for 6.8.0, module version = 8.14.13
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "synaptics"
(II) Reloading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) ATI Radeon/FireGL: The following chipsets are supported:
        RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
        MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
        RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
        RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
        MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
        FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
        RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
        RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
        RADEON 9600 PRO (RV360 4152),
        MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
        RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
        RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
        RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
        RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
        FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
        RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
        FireGL X2-256/X2-256t (R350 4E4B),
        MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
        RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64),
        MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
        RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
        MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
        MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
        RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
        RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
        FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
        RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
        RADEON X800 PRO (R423 5549),
        RADEON X800 XT Platinum Edition (R423 554A),
        RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
        FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
        MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
        RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
        RADEON X850 XT Platinum Edition (R480 5D4D),
        RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
        MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
        FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
        RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
        RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
        RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
        MOBILITY RADEON X700 (M26 5653), RADEON 9100 IGP (RS300 5834),
        RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
        MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(--) Chipset MOBILITY RADEON X600 (M24 3150) found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1  0       0xfbff9000 - 0xfbff9fff (0x1000) MX[b]
        [6] -1  0       0xfbffbc00 - 0xfbffbcff (0x100) MX[b]
        [7] -1  0       0xfbffb800 - 0xfbffb8ff (0x100) MX[b]
        [8] -1  0       0xfbffb400 - 0xfbffb4ff (0x100) MX[b]
        [9] -1  0       0xfbffa800 - 0xfbffafff (0x800) MX[b]
        [10] -1 0       0xfbffc000 - 0xfbffffff (0x4000) MX[b]
        [11] -1 0       0xdffff400 - 0xdffff4ff (0x100) MX[b]
        [12] -1 0       0xdffff800 - 0xdffff9ff (0x200) MX[b]
        [13] -1 0       0xdffffc00 - 0xdfffffff (0x400) MX[b]
        [14] -1 0       0xfbee0000 - 0xfbefffff (0x20000) MX[b](B)
        [15] -1 0       0xf0000000 - 0xf000ffff (0x10000) MX[b](B)
        [16] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
        [17] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [18] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [19] -1 0       0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [20] -1 0       0x00000400 - 0x0000041f (0x20) IX[b]
        [21] -1 0       0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
        [22] -1 0       0x00009000 - 0x0000907f (0x80) IX[b]
        [23] -1 0       0x00009400 - 0x000094ff (0x100) IX[b]
        [24] -1 0       0x00008400 - 0x0000843f (0x40) IX[b]
        [25] -1 0       0x00008800 - 0x000088ff (0x100) IX[b]
        [26] -1 0       0x0000a800 - 0x0000a81f (0x20) IX[b]
        [27] -1 0       0x0000a400 - 0x0000a41f (0x20) IX[b]
        [28] -1 0       0x0000a000 - 0x0000a01f (0x20) IX[b]
        [29] -1 0       0x00009800 - 0x0000981f (0x20) IX[b]
        [30] -1 0       0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x8211510
(II) resource ranges after probing:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [5] -1  0       0xfbff9000 - 0xfbff9fff (0x1000) MX[b]
        [6] -1  0       0xfbffbc00 - 0xfbffbcff (0x100) MX[b]
        [7] -1  0       0xfbffb800 - 0xfbffb8ff (0x100) MX[b]
        [8] -1  0       0xfbffb400 - 0xfbffb4ff (0x100) MX[b]
        [9] -1  0       0xfbffa800 - 0xfbffafff (0x800) MX[b]
        [10] -1 0       0xfbffc000 - 0xfbffffff (0x4000) MX[b]
        [11] -1 0       0xdffff400 - 0xdffff4ff (0x100) MX[b]
        [12] -1 0       0xdffff800 - 0xdffff9ff (0x200) MX[b]
        [13] -1 0       0xdffffc00 - 0xdfffffff (0x400) MX[b]
        [14] -1 0       0xfbee0000 - 0xfbefffff (0x20000) MX[b](B)
        [15] -1 0       0xf0000000 - 0xf000ffff (0x10000) MX[b](B)
        [16] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
        [17] 0  0       0x000a0000 - 0x000affff (0x10000) MS[b]
        [18] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[b]
        [19] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[b]
        [20] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [21] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [22] -1 0       0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [23] -1 0       0x00000400 - 0x0000041f (0x20) IX[b]
        [24] -1 0       0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
        [25] -1 0       0x00009000 - 0x0000907f (0x80) IX[b]
        [26] -1 0       0x00009400 - 0x000094ff (0x100) IX[b]
        [27] -1 0       0x00008400 - 0x0000843f (0x40) IX[b]
        [28] -1 0       0x00008800 - 0x000088ff (0x100) IX[b]
        [29] -1 0       0x0000a800 - 0x0000a81f (0x20) IX[b]
        [30] -1 0       0x0000a400 - 0x0000a41f (0x20) IX[b]
        [31] -1 0       0x0000a000 - 0x0000a01f (0x20) IX[b]
        [32] -1 0       0x00009800 - 0x0000981f (0x20) IX[b]
        [33] -1 0       0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
        [34] 0  0       0x000003b0 - 0x000003bb (0xc) IS[b]
        [35] 0  0       0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, NONE"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "off"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "on"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "MOBILITY RADEON X600 (M24 3150)" (Chipset = 0x3150)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1881)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xf0000000
(--) fglrx(0): ROM-BIOS at 0xfbee0000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x03
(--) fglrx(0): VideoRAM: 65536 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.2.0
        ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS -------- 
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option: 
        Monitor1--Type AUTO, Monitor2--Type NONE

(II) fglrx(0): Primary head:
 Monitor   -- LVDS
 Connector -- None
 DAC Type  -- Unknown
 TMDS Type -- NONE
 DDC Type  -- NONE
(II) fglrx(0): Secondary head:
 Monitor   -- NONE
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) fglrx(0): 
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: Samsung LTN150P1-L02    
(II) fglrx(0): Panel Size from BIOS: 1400x1050
(**) fglrx(0):  PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is enabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Valid mode using on-chip RMX: 1400x1050
(II) fglrx(0): Total 1 valid mode(s) found.
(--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
(**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) fglrx(0): Modeline "1400x1050"  108.00  1400 34208 34320 1688  1050 1052 1055 1063
(==) fglrx(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o":  No symbols found
(II) Module fb: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.2.0
        ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
        compiled for 6.8.0, module version = 8.14.13
        ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x0000031e
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0xf0000000 - 0xf000ffff (0x10000) MX[b]
        [1] 0   0       0xd0000000 - 0xd7ffffff (0x8000000) MX[b]
        [2] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[b](B)
        [3] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
        [4] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [5] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [6] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [7] -1  0       0xfbff9000 - 0xfbff9fff (0x1000) MX[b]
        [8] -1  0       0xfbffbc00 - 0xfbffbcff (0x100) MX[b]
        [9] -1  0       0xfbffb800 - 0xfbffb8ff (0x100) MX[b]
        [10] -1 0       0xfbffb400 - 0xfbffb4ff (0x100) MX[b]
        [11] -1 0       0xfbffa800 - 0xfbffafff (0x800) MX[b]
        [12] -1 0       0xfbffc000 - 0xfbffffff (0x4000) MX[b]
        [13] -1 0       0xdffff400 - 0xdffff4ff (0x100) MX[b]
        [14] -1 0       0xdffff800 - 0xdffff9ff (0x200) MX[b]
        [15] -1 0       0xdffffc00 - 0xdfffffff (0x400) MX[b]
        [16] -1 0       0xfbee0000 - 0xfbefffff (0x20000) MX[b](B)
        [17] -1 0       0xf0000000 - 0xf000ffff (0x10000) MX[b](B)
        [18] -1 0       0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
        [19] 0  0       0x000a0000 - 0x000affff (0x10000) MS[b]
        [20] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[b]
        [21] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[b]
        [22] 0  0       0x0000b000 - 0x0000b0ff (0x100) IX[b]
        [23] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [24] -1 0       0x00000000 - 0x000000ff (0x100) IX[b]
        [25] -1 0       0x0000d800 - 0x0000d8ff (0x100) IX[b]
        [26] -1 0       0x00000400 - 0x0000041f (0x20) IX[b]
        [27] -1 0       0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
        [28] -1 0       0x00009000 - 0x0000907f (0x80) IX[b]
        [29] -1 0       0x00009400 - 0x000094ff (0x100) IX[b]
        [30] -1 0       0x00008400 - 0x0000843f (0x40) IX[b]
        [31] -1 0       0x00008800 - 0x000088ff (0x100) IX[b]
        [32] -1 0       0x0000a800 - 0x0000a81f (0x20) IX[b]
        [33] -1 0       0x0000a400 - 0x0000a41f (0x20) IX[b]
        [34] -1 0       0x0000a000 - 0x0000a01f (0x20) IX[b]
        [35] -1 0       0x00009800 - 0x0000981f (0x20) IX[b]
        [36] -1 0       0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
        [37] 0  0       0x000003b0 - 0x000003bb (0xc) IS[b]
        [38] 0  0       0x000003c0 - 0x000003df (0x20) IS[b]
(II) fglrx(0): UMM area:     0xd07ad000 (size=0x03843000)
(II) fglrx(0): driver needs X.org 6.8.x
(II) fglrx(0): detected X.org 6.8.2
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8935000
(II) fglrx(0): [drm] mapped SAREA 0xf8935000 to 0xb7daf000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.14.13
(II) fglrx(0):     Date: Jun  8 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.10
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xf0000000
(II) fglrx(0): [drm] ATIGART Table handle = 0xd3ff0000
(II) fglrx(0): [pcie] 65536 kB allocated with handle 0x00000000
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(WW) fglrx(0): [drm] using DRM defaults (QS_ID=9650ffff)
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xfcec0000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x007ad000
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,1429)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1056)
(II) fglrx(0): Largest offscreen area available: 1408 x 365
(**) Option "dpms" "true"
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "EnablePageFlip" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Solid Lines
        Dashed Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                22 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete

Voilà mon xorg.conf :

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

    Load        "synaptics"
#    load	"xaa"
# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"
EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc105" #war: pc102
    Option "XkbLayout"	"fr"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "6 7"
    Option "Device"     "/dev/input/mice"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

Section "InputDevice"
    Identifier "SynapticsMouse0"
    Driver "synaptics"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/input/mice"
    Option "MaxSpeed" "0.12"
    Option "MinSpeed" "0.06"
    Option "BottomEdge" "4200"
    Option "SHMConfig" "on"
    Option "LeftEdge" "1700"
    Option "FingerLow" "25"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "FingerHigh" "30"
    Option "VertScrollDelta" "100"
    Option "TopEdge" "1700"
    Option "RightEdge" "5300"
    Option "AccelFactor" "0.0010"
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 48.4
    VertRefresh 60 - 75
    Option "DPMS" "true"
EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
    Option "EnablePageFlip"             "True"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000" 
    Option "MonitorLayout"              "AUTO, NONE"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    #Option "TVStandard"                 "NTSC-M"     
    #Option "TVHSizeAdj"                 "0"     
    #Option "TVVSizeAdj"                 "0"     
    #Option "TVHPosAdj"                  "0"     
    #Option "TVVPosAdj"                  "0"     
    #Option "TVHStartAdj"                "0"     
    #Option "TVColorAdj"                 "0"     
    #Option "GammaCorrectionI"           "0x06419064"
    #Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "on"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "off"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=3150
    #VideoRam	64
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1400x1050"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

    Option "BlankTime" "5" #Blank screen nach fuenf Minuten
    Option "StandbyTime" "10" # Ausschalten nach zehn Minuten
    Option "SuspendTime" "20" # Voller Suspend nach 20 Minuten
    Option "OffTime" "30" # ganz aus nach 30 Minuten
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "SynapticsMouse0" "AlwaysCore"

EndSection

### EOF ###

En mettant l'option VideoRam 64 (j'ai testé pas mal de valeurs), X ne se lance pas, voilà l'erreur :

(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8935000
(II) fglrx(0): [drm] mapped SAREA 0xf8935000 to 0xb7daf000
(II) fglrx(0): [drm] drmAddMap failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0xffff0000

Fatal server error:
xf86MapVidMem: Could not mmap framebuffer (0xd0000000,0xffff0000) (Invalid argument)

Si quelqu'un a déjà rencontré ce type de problème, je suis prenneur d'un retour d'expérience.

@+

Dernière modification par Passe (Le 23/07/2005, à 15:36)

Hors ligne

#181 Le 23/07/2005, à 16:08

Passe

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bon ben, concernant mon problème, je l'ai résolu en limitant la ram système allouée à 512Mo ou 768Mo.

C'est très laid comme méthode, ça me convient pas, mais ça marche.

append="mem=512m" ou 768m dans lilo ou grub.

Y a pas un autre moyen ? je voudrais quand même profiter de mes 1Go de ram hmm

Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Maximum main memory to use for agp memory: 440M
agpgart: AGP aperture is 256M @ 0x0
...
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[fglrx] module loaded - fglrx 8.14.13 [Jun  8 2005] on minor 0
[fglrx] free  PCIe = 54804480
[fglrx] max   PCIe = 54804480
[fglrx] free  LFB = 47099904
[fglrx] max   LFB = 47099904
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total PCIe = 16384

Quelques lignes intéressantes dans les logs de X.org, il d'agit des même que précédament, ce qui suit est à a rajouter à la suite :

(II) fglrx(0): Direct rendering enabled
(**) fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/input/mice"
etc...

Est-ce que y a moyen de faire un repport quelquepart aux dev d'ati ?

@+

Dernière modification par Passe (Le 23/07/2005, à 17:38)

Hors ligne

#182 Le 24/07/2005, à 00:48

Passe

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bon, ben, j'ai trouvé une solution pour ne pas limiter ma ram à 768Mo.

J'ai posté le tout ici : http://forums.gentoo.org/viewtopic-p-2596595.html#2596595

@+

Hors ligne

#183 Le 24/07/2005, à 16:24

Anthyme

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

root@yeindal:~# glxgears
6585 frames in 5.0 seconds = 1317.000 FPS
7815 frames in 5.0 seconds = 1563.000 FPS
7813 frames in 5.0 seconds = 1562.600 FPS
7816 frames in 5.0 seconds = 1563.200 FPS
root@yeindal:~# fgl_glxgears
1349 frames in 5.0 seconds = 269.800 FPS
1575 frames in 5.0 seconds = 315.000 FPS
1577 frames in 5.0 seconds = 315.400 FPS
1572 frames in 5.0 seconds = 314.400 FPS

driver ATI 8.08.25
Ordinateur portable IBM T40p
Pentium M 1,6 GHz
1go RAM
FireGL mobility 9000

Tres bon tutoriel sinon ;-)

#184 Le 24/07/2005, à 16:42

freepda

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

moi, j'ai un asus W3 avec une carte Radeon X600, et j'ai tout essayé, mais j'ai toujours un ecran noir.

Quand je fais :
lsmod | grep fglrx

J'ai :
fglrx                 229568  0

C'est normal le 0 à la fin ?

Hors ligne

#185 Le 24/07/2005, à 17:56

Passe

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

freepda a écrit :

moi, j'ai un asus W3 avec une carte Radeon X600, et j'ai tout essayé, mais j'ai toujours un ecran noir.

Quand je fais :
lsmod | grep fglrx

J'ai :
fglrx                 229568  0

C'est normal le 0 à la fin ?

Regarde mon dernier post.

Hors ligne

#186 Le 26/07/2005, à 17:22

kmeleon

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Merciiiiiiiiiiiiiiiiiiiiiii !!! Le petit truc de l'AGP !!!! ca marcheeeee !!!!!!!!

Hors ligne

#187 Le 28/07/2005, à 13:39

rizoto

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Arkenlond a écrit :

Résultat mitigé dans cette installation

glxgears
1511 frames in 5.0 seconds = 302.200 FPS
1469 frames in 5.0 seconds = 293.800 FPS
1469 frames in 5.0 seconds = 293.800 FPS
1582 frames in 5.0 seconds = 316.400 FPS
1469 frames in 5.0 seconds = 293.800 FPS

fgl_glxgears
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  144 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  32
  Current serial number in output stream:  32

Card Name : Radeon 9600
Bios version 8.11
Chip Type ATI RADEON 9600 5RV350 AP)
Chip Revision A12
DAC speed 400MHz
Memory Type DDR SDRAM
Memory Size 128 MByte
Transfer Mode PCI
Driver Version 8.08.25

Une idée de ce qui se passe?

J'ai un Athlon XP 2600+ sur un chipset nForce2.


Fausse alerte, ça marche, maintenant. Il me fallait effectivement changer le support AGPGART.

glxgears
7807 frames in 5.0 seconds = 1561.400 FPS
8494 frames in 5.0 seconds = 1698.800 FPS
9174 frames in 5.0 seconds = 1834.800 FPS
9188 frames in 5.0 seconds = 1837.600 FPS

fgl_glxgears
1710 frames in 5.0 seconds = 342.000 FPS
2377 frames in 5.0 seconds = 475.400 FPS
2372 frames in 5.0 seconds = 474.400 FPS
2372 frames in 5.0 seconds = 474.400 FPS

J'ai le même problème, comment modifier AGPGART

Hors ligne

#188 Le 28/07/2005, à 13:40

effraie

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

ça marche pour apple aussi? j'ai un Ibook G4.. et je n'ai pas fouillé, mais il me semble qu'il n'y a pas de "restricted-modules"...


400iso.net
[Trops de chefs, pas assez d'indiens]

Hors ligne

#189 Le 28/07/2005, à 15:14

micho

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Asus M6
Radeon 9600/9700

fgl_glxgears

1368 frames in 5.0 seconds = 273.600 FPS
1369 frames in 5.0 seconds = 273.800 FPS
1370 frames in 5.0 seconds = 274.000 FPS
1442 frames in 5.0 seconds = 288.400 FPS
1498 frames in 5.0 seconds = 299.600 FPS
1241 frames in 5.0 seconds = 248.200 FPS
1368 frames in 5.0 seconds = 273.600 FPS
1377 frames in 5.0 seconds = 275.400 FPS
1375 frames in 5.0 seconds = 275.000 FPS

glxgearsglxgears
5946 frames in 5.0 seconds = 1189.200 FPS
6797 frames in 5.0 seconds = 1359.400 FPS
6801 frames in 5.0 seconds = 1360.200 FPS
6800 frames in 5.0 seconds = 1360.000 FPS
6801 frames in 5.0 seconds = 1360.200 FPS
6801 frames in 5.0 seconds = 1360.200 FPS

5946 frames in 5.0 seconds = 1189.200 FPS
6797 frames in 5.0 seconds = 1359.400 FPS
6801 frames in 5.0 seconds = 1360.200 FPS
6800 frames in 5.0 seconds = 1360.000 FPS
6801 frames in 5.0 seconds = 1360.200 FPS
6801 frames in 5.0 seconds = 1360.200 FPS

Un grand MERCI...... pour un Grand debutant

#190 Le 28/07/2005, à 23:11

Kynoo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Super..
J'ai fait la manip expiqué en premier post...
Et VLAN.... message d'erreure au boot : Votre carte n'est pas une FireGL ( ben oui!! je sais!! tongue)

Et imossible pour moi d'editer le xorg.conf.. j'en suis à ma 4eme heure de Linux tongue


Help !!!

Hors ligne

#191 Le 29/07/2005, à 06:36

Stemp

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Kynoo, tu as quoi comme carte ?


«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

Hors ligne

#192 Le 29/07/2005, à 06:38

Kynoo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Stemp a écrit :

Kynoo, tu as quoi comme carte ?

Radeon 9000 mobility intégré sur un portable Dell Latitude C610.

Dernière modification par Kynoo (Le 29/07/2005, à 06:40)

Hors ligne

#193 Le 29/07/2005, à 06:58

Stemp

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Va faire un tour du côté du Wiki, il y a plusieurs manières d'installer des drivers pour les cartes ATI.
Essaie avec l'installeur ATI, et sinon avec le driver libre "Radeon".

http://wiki.ubuntu-fr.org/materiel/ati


«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

Hors ligne

#194 Le 29/07/2005, à 07:05

Kynoo

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

J'aimerais surtout de l'aide pour éditer et donc reconfigurer mon xorg.conf  .

J'ai tester Nano, Vim, Vi, mais quand je suis dans ces logiciels, je n'arrive meme pas à ouvrir xorg.conf, je ne vois meme pas commenton ouvre quoi que ce soit sad

Hors ligne

#195 Le 29/07/2005, à 09:53

Eric P.

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Avec ces éditeurs, le plus simple est de les lancer suivis du nom du fichier à ouvrir.
Par exemple:

$ sudo nano /etc/X11/xorg.conf

vim est nettement plus puissant que nano mais nécessite un apprentissage assez long, donc je te conseille plutôt nano.

Petite remarque sur la page Ati dans le wiki: j'ai mergé les redondances, mais il reste à corriger le début de la partie "Comment installer l'accélaration 3D sur une carte ATI ?". Elle dit qu'il faut le driver propriétaire pour avoir de la 3D, ce qui est faut (le driver libre radeon supporte aussi l'accélération 3D sur certaines cartes).
L'idéal serait de commencer par une introduction présentant chaque driver, et de continuer avec les 3 parties (fglrx du paquet Ubuntu, radeon, fglrx du site ATI).

Hors ligne

#196 Le 31/07/2005, à 21:23

plip

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Sur une radeon X300 128Mo pci express (PIV 3GHz RAM 1Go), j'obtiens :

glxgears :
3002 frames in 5.0 seconds = 600.400 FPS
3250 frames in 5.0 seconds = 650.000 FPS
3250 frames in 5.0 seconds = 650.000 FPS
3250 frames in 5.0 seconds = 650.000 FPS
fgl_glxgears :
538 frames in 5.0 seconds = 107.600 FPS
667 frames in 5.0 seconds = 133.400 FPS
683 frames in 5.0 seconds = 136.600 FPS
677 frames in 5.0 seconds = 135.400 FPS

Ces résultats sont assez loin de ce que j'ai pu voir sur ce forum. La version de mon noyau est la 2.6.10-5 (hoary).

Je ne sais pas trop où chercher pour résoudre ce problème, même si le DRI est activé ces résultats sont mitigés.

Est-ce normal? Est-ce que le PCI express pose problème, ie. n'est pas supporté correctemement avec les drivers ATI ou bien le noyau 2.6.10?

Quelqu'un a-t-il déja été confronté à ce genre de configuration?

Merci

#197 Le 02/08/2005, à 21:55

kedare

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

je sait pas si c'est normale , mais mon FPS est 2 fois plus gros avant d'installer les truc ATI [et j'ai une ATI Radeon 9250]

Hors ligne

#198 Le 04/08/2005, à 13:32

Tuix

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Bonjour,

Ces résultats sont assez loin de ce que j'ai pu voir sur ce forum. La version de mon noyau est la 2.6.10-5 (hoary).

Une x300 c'est bas de gamme ! comparé a une 9800 pro 256 bits l'equivalent serait une bonne x700 en terme de puissance pas en instruction shader pixel shader etc...

Sinon c'est vrai que c'est bas ! ton kernel c'est un i686 ? regarde bien s'il trouve la meme puissance  parce que moi avec un kernel de i386 ca me limiter ma ram a 885 ! mais quand jai mis un k7 pour athlon/duron hop 1024 m'enfin c'est peut etre des petit truc comme ca quoi...

Bon je vais me mettre à installer un driver ati pour ma 9800 pro c'est pas gagné !!! big_smile
vous tien informé menfin ca sera plus la CATA lol

#199 Le 04/08/2005, à 13:45

Tarlak

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Tuix

Pour ma 9800 Pro j'ai pas eu de soucis j'ai juste fait ce ceci

dans la section device au lieu d'avoir ca :

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon 9800 Pro (R350 NH)"
    Driver        "ati"
    BusID        "PCI:2:0:0"
EndSection

j'ai mis ca :

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon 9800 Pro (R350 NH)"
    Driver        "fglrx"
    BusID        "PCI:2:0:0"
EndSection

et pour finir j'ai rajouté "fglrx" au fichier /etc/modules.

En gros j'ai fais ce qui est dis la

et de 300 fps je sus passer a 3500 (enfin avec un simple test de glxgear)

Mais je n'ai pas encore modifier mon kernel pour passer d'un I386 à I686 et ainsi avoir les gestion de mes 2Go de mémoire qui me donnera peut etre un peu plus de punch smile

Sinon voila mes resultat :
Radeon 9800 Pro avec 256 Mo de Ram
Driver Version : 8.08.25
glxgears

15393 frames in 5.0 seconds = 3078.600 FPS
17470 frames in 5.0 seconds = 3494.000 FPS
17509 frames in 5.0 seconds = 3501.800 FPS
17509 frames in 5.0 seconds = 3501.800 FPS
17510 frames in 5.0 seconds = 3502.000 FPS

fgl_glxgears

3353 frames in 5.0 seconds = 670.600 FPS
3538 frames in 5.0 seconds = 707.600 FPS
3538 frames in 5.0 seconds = 707.600 FPS
3539 frames in 5.0 seconds = 707.800 FPS
3538 frames in 5.0 seconds = 707.600 FPS

Dernière modification par Tarlak (Le 05/08/2005, à 06:30)

Hors ligne

#200 Le 05/08/2005, à 13:25

plip

Re : [HOW-TO] : Installation des drivers 3d propriétaires pour ATI Radeon

Mon noyau est bien un i686, j'ai essayé la toute dernière version des driver ATI et j'obtiens le même résultat, à noter que lorsque je lance l'outil d'ATI, mon device mode est PCI et non AGP (ce qui est normal puisque c'est du PCI Express mais j'aurais quand même aimé voir PCI-E ou qqc comme ça).

Peut-être est-ce le chipset 945G qui n'est pas supporté correctement avec le 2.6.10