#1 Le 19/12/2011, à 12:47
- plexus
[RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Bonjour,
je poste pour avoir votre avis avant de tout trifouiller.
Je suis en dual boot 7/ Lucid sur plusieurs DD
Je viens de me rendre compte que j'avais mal partitioné mon DD linux (400 Go) j'avais fais 3 partitions : swap (6 Go) - / (194 Go) - /home (200 go) évidemment mes 200 go sur /home me sont insuffisant maintenant et j'ai plein de place perdue sur /. donc je pensais modifier ma partition avec Gparted (via livecd comme lu sur le forum et la doc):
1° est il fiable de modifier une partition afin de ne perdre aucune donnée ou vaut-il mieux sauvegarder et tout réinstaller (ce que je m'apprête à faire)
Avec le temps je m'aperçois que j'utilise plus souvent Ubuntu que windows, aussi si je décide de reformater mon DD 400go je pense booter dessus et donc y avoir grub d'installer.
Alors je voudrais savoir :
2° comment savoir sur quel DD est installé grub actuellement ? (je crains que ce soit sur le DD win7, car même en retirant le DD linux il refuse de mettre à jour le sp1 avec un code d'erreur relatif à impossibilité d'écrire sur le disque mais peut-être que cela n'a rien à voir)
3° avec Boot-Repair peut-on faire en sorte de déplacer mon grub actuel vers le DD Linux ?
4° le mbr original (celui avec win7 tout seul) sera-t'il restauré sur le DD win7? (Je voudrais que Win7 se croit seul (sans grub) si je décide de booter via le bios sur son DD)
5° me faudra-t'il réinstaller win7 ?
Merci de vos réponses et conseils avisés.
Dernière modification par plexus (Le 20/12/2011, à 19:07)
Hors ligne
#2 Le 19/12/2011, à 20:31
- malbo
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Si tu répondais à cette demande, on pourrait mieux comprendre la situation : http://forum.ubuntu-fr.org/viewtopic.php?id=614071
Hors ligne
#3 Le 19/12/2011, à 20:44
- compte supprimé
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Un sudo fdisk -l ne suffrait pas ?
A part ça, quand il s'agit de toucher aux partitions, il est toujours prudent de faire une sauvegarde au moins de tes documents. Parce que ré-installer, ça on peut toujours, mais les photos de vacances...
Dernière modification par faustus (Le 19/12/2011, à 20:51)
#4 Le 20/12/2011, à 08:56
- plexus
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
bonjour,
voici le lien du rapport :
http://paste.ubuntu.com/776039/
je regarde du coté du fdisk -l
merci,
Hors ligne
#5 Le 20/12/2011, à 09:12
- malbo
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Je colle ici le résultat de ton Boot Info Script pour qu'on l'ait sous les yeux :
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb.
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdc and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdc5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 * 206,848 307,202,047 306,995,200 7 NTFS / exFAT / HPFS
/dev/sda3 307,202,048 1,331,202,047 1,024,000,000 7 NTFS / exFAT / HPFS
/dev/sda4 1,331,202,048 1,953,521,663 622,319,616 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 657,819,647 657,817,600 7 NTFS / exFAT / HPFS
/dev/sdb2 657,819,648 1,305,669,631 647,849,984 7 NTFS / exFAT / HPFS
/dev/sdb3 1,305,669,632 1,953,519,615 647,849,984 7 NTFS / exFAT / HPFS
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders, total 781422768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 11,718,655 11,716,608 82 Linux swap / Solaris
/dev/sdc2 11,720,702 781,422,591 769,701,890 5 Extended
/dev/sdc5 11,720,704 390,797,311 379,076,608 83 Linux
/dev/sdc6 390,799,360 781,422,591 390,623,232 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 B6D0F12FD0F0F709 ntfs Réservé au système
/dev/sda2 7C00FD1500FCD6DC ntfs SysWin7
/dev/sda3 1A821021821003C3 ntfs Brouillon 7
/dev/sda4 6C461657461621FE ntfs Docs Plexus 7
/dev/sdb1 E6041673041646C9 ntfs Malle
/dev/sdb2 8E307BDD307BCB2B ntfs Besace
/dev/sdb3 1EDE1E47DE1E181B ntfs Saccoche
/dev/sdc1 97897bd3-2a78-47e9-99a0-a29a75755d4a swap
/dev/sdc5 634ea176-ba6b-49cb-aed7-f108e486a397 ext4
/dev/sdc6 7fd2f406-2da5-4efe-a3d0-46c5d736d63b ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdc5 / ext4 (rw,errors=remount-ro)
/dev/sdc6 /home ext4 (rw)
=========================== sdc5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x1024
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, avec Linux 2.6.32-37-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux /boot/vmlinuz-2.6.32-37-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro splash quiet vga=794 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-37-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-37-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
echo 'Chargement de Linux 2.6.32-37-generic ...'
linux /boot/vmlinuz-2.6.32-37-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro single splash quiet vga=794
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-37-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-36-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux /boot/vmlinuz-2.6.32-36-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro splash quiet vga=794 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-36-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-36-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
echo 'Chargement de Linux 2.6.32-36-generic ...'
linux /boot/vmlinuz-2.6.32-36-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro single splash quiet vga=794
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-36-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-35-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux /boot/vmlinuz-2.6.32-35-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro splash quiet vga=794 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-35-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-35-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
echo 'Chargement de Linux 2.6.32-35-generic ...'
linux /boot/vmlinuz-2.6.32-35-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro single splash quiet vga=794
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-35-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-34-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux /boot/vmlinuz-2.6.32-34-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro splash quiet vga=794 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-34-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-34-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
echo 'Chargement de Linux 2.6.32-34-generic ...'
linux /boot/vmlinuz-2.6.32-34-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro single splash quiet vga=794
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-34-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set B6D0F12FD0F0F709
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sdc5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc5 during installation
UUID=634ea176-ba6b-49cb-aed7-f108e486a397 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdc6 during installation
UUID=7fd2f406-2da5-4efe-a3d0-46c5d736d63b /home ext4 defaults 0 2
/dev/sdc1 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sdc5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
41.716362000 = 44.792602624 boot/grub/core.img 1
122.227741241 = 131.241037824 boot/grub/grub.cfg 1
7.013668060 = 7.530868736 boot/initrd.img-2.6.32-34-generic 2
6.984268188 = 7.499300864 boot/initrd.img-2.6.32-35-generic 2
7.343643188 = 7.885176832 boot/initrd.img-2.6.32-36-generic 2
7.424804688 = 7.972323328 boot/initrd.img-2.6.32-37-generic 2
41.858268738 = 44.944973824 boot/vmlinuz-2.6.32-34-generic 1
41.865547180 = 44.952788992 boot/vmlinuz-2.6.32-35-generic 1
41.844654083 = 44.930355200 boot/vmlinuz-2.6.32-36-generic 1
41.850440979 = 44.936568832 boot/vmlinuz-2.6.32-37-generic 1
7.424804688 = 7.972323328 initrd.img 2
7.343643188 = 7.885176832 initrd.img.old 2
41.850440979 = 44.936568832 vmlinuz 1
41.844654083 = 44.930355200 vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdc2
00000000 ce 01 59 eb e5 0f 11 56 c6 fd 27 54 bd 75 03 8a |..Y....V..'T.u..|
00000010 1d af c0 c8 28 c0 a5 db c0 6e 05 6c a7 9c 00 ed |....(....n.l....|
00000020 98 d8 3a 12 34 45 04 13 ca ec 76 91 c9 0a 20 70 |..:.4E....v... p|
00000030 d5 f5 43 4b de cb 50 5b 29 49 1c 17 f8 f0 35 5f |..CK..P[)I....5_|
00000040 27 9a 00 73 42 80 c7 52 a2 f5 25 f8 bd 22 aa 20 |'..sB..R..%..". |
00000050 c1 41 18 be 34 41 93 3e a2 86 ae af bd 78 82 84 |.A..4A.>.....x..|
00000060 08 d6 c4 0c 97 2c 15 c7 4e 15 72 5d f4 a7 e9 98 |.....,..N.r]....|
00000070 94 94 57 45 fa 24 ea 8e 51 e7 3c c6 c7 4b ad 01 |..WE.$..Q.<..K..|
00000080 8e 43 09 36 8c d0 60 ba 99 4c e0 41 7b 3b ac 5f |.C.6..`..L.A{;._|
00000090 f6 68 f9 a8 6f 8d fe 73 d3 45 a9 c7 c4 57 9d 24 |.h..o..s.E...W.$|
000000a0 05 0f a6 87 19 15 45 2c 6e 42 b2 0d 23 f9 b6 a5 |......E,nB..#...|
000000b0 87 b0 41 c2 b6 75 f4 4b d2 35 e8 38 51 9f 33 1f |..A..u.K.5.8Q.3.|
000000c0 38 d4 bf ce 27 6f d1 20 2e f3 51 1d 04 40 95 11 |8...'o. ..Q..@..|
000000d0 20 0d 2d 23 93 88 b1 fd 6c 62 30 92 ad aa 59 bc | .-#....lb0...Y.|
000000e0 29 48 03 97 74 e6 98 f6 25 2c 55 a9 81 66 49 04 |)H..t...%,U..fI.|
000000f0 98 11 9a 42 40 2f a1 96 3d 17 a6 3c 11 df a9 b6 |...B@/..=..<....|
00000100 26 8e 8b 3f 5a f0 a2 8e 21 4a 3e dd 00 83 07 c3 |&..?Z...!J>.....|
00000110 cb 7e e0 c2 c7 71 69 ed 1f 13 81 26 75 05 74 1a |.~...qi....&u.t.|
00000120 ab d1 ac db 32 4c 6a 62 d7 dd 6c fb 4e 71 82 43 |....2Ljb..l.Nq.C|
00000130 25 cf b1 6d cc 8e c2 12 97 e3 60 b4 37 aa 2d 23 |%..m......`.7.-#|
00000140 99 d8 e7 bc 9a 78 ae 30 0f 52 ca 99 15 72 0d 82 |.....x.0.R...r..|
00000150 c3 42 f2 26 0b c7 9b 7a 38 2b 4a aa a8 80 f8 36 |.B.&...z8+J....6|
00000160 f3 74 a4 0b 49 4f 62 77 a9 c6 b1 0e 65 79 b0 1a |.t..IObw....ey..|
00000170 93 f2 4a 05 16 84 aa 0c 37 98 fc a6 85 03 00 b6 |..J.....7.......|
00000180 91 a2 94 d5 83 a3 75 5a 6a 19 57 6e dd 3b 0d 6e |......uZj.Wn.;.n|
00000190 6e 75 a6 bb 8e 18 bc f4 27 d2 f8 10 84 54 7f 63 |nu......'....T.c|
000001a0 66 10 16 c8 59 26 d5 6a fe 77 df 05 f2 9f 0f b0 |f...Y&.j.w......|
000001b0 7c 9c 51 7a c4 03 b4 69 8f d6 8a d1 ca 4a 00 93 ||.Qz...i.....J..|
000001c0 bb d9 83 fe ff ff 02 00 00 00 00 40 98 16 00 fe |...........@....|
000001d0 ff ff 05 fe ff ff 02 40 98 16 00 78 48 17 00 00 |.......@...xH...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
Globalement, c'est très bien organisé.
Il y a un défaut sur le disque sda :
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
Il va falloir que tu répares de démarrage de Windows 7 afin que cet amorceur de grub qui n'a rien à faire là (il ne peut pas fonctionner) soit remplacé par l'amorceur de Windows 7 dans le MBR de sda. Tu peux utiliser ce post pour cela : http://forum.ubuntu-fr.org/viewtopic.ph … 2#p3845512
Toi, tu as seulement besoin de passer la commande suivante (tu n'as pas besoin de réparer le secteur de boot) :
bootrec /fixmbr
Par ailleurs, je te conseille de sauvegarder (sur DD externe de préférence ou à défaut sur un de tes DD internes) tes doc qui sont dans la disque "Ubuntu" de 400 Go, puis de tout repartitionner avc Gparted : supprimer la totalité des partitions de ce DD de 400 Go et tout reconstruire. Lors de la réinstallation de Ubuntu, je te recommande de veiller à bien installer l'amorceur de Grub dans le MBR du disque dur de 400 Go. Si tu te plantes, on saura t'aider à remettre ça d'aplomb mais bon...
Edit : puisque tu te replonges dans le multi-boot, je te conseille de comprendre ce post au sujet de Grub : http://forum.ubuntu-fr.org/viewtopic.php?id=498111
Dernière modification par malbo (Le 20/12/2011, à 09:32)
Hors ligne
#6 Le 20/12/2011, à 09:56
- plexus
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Merci de ta réponse
Je crois que le problème sur sda est sans doute du à une première installation d'ubuntu (avant lucid) et de la réparation de windows qui avait du s'en suivre.
Ayant lu ici et là que Oneiric avait... quelques défauts de jeunesse et comme nous n'avons jamais été aussi proche de la venue du pengolin, je crois qe je vais me lancer dans le trifouillage, histoire d'essayer d'en apprendre un peu plus.
je regarde les divers post et tente quelque chose.
je reviens avec des nouvelles, mauvaises ou bonnes.
Merci de ta réponse rapide.
Dernière modification par plexus (Le 20/12/2011, à 09:56)
Hors ligne
#7 Le 20/12/2011, à 10:43
- plexus
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Re,
voici le nouveau lien du rapport :
http://paste.ubuntu.com/776089/
le bootrec /fixmbr semble avoir fonctionné :
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
=> Windows is installed in the MBR of /dev/sdb.
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdc and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
par contre lorsque je boot directement depuis le DD1 j'ai le message suivant :
BootMGR absent
Win7 démarre cependant correctement depuis grub
J'ai executé la commande bootrec /fixmbr depuis la ligne de commande.
dois-je lancer la réparation automatique de Win7 ?
ou un bootrec /fixboot ?
Merci de tes conseils ? (je préfère être prudent avant de tout casser)
Dernière modification par plexus (Le 20/12/2011, à 10:45)
Hors ligne
#8 Le 20/12/2011, à 11:10
- malbo
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Je colle au mur ton nouveau Boot Info Script :
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
=> Windows is installed in the MBR of /dev/sdb.
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdc and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 5 for /boot/grub.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdc2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdc5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 * 206,848 307,202,047 306,995,200 7 NTFS / exFAT / HPFS
/dev/sda3 307,202,048 1,331,202,047 1,024,000,000 7 NTFS / exFAT / HPFS
/dev/sda4 1,331,202,048 1,953,521,663 622,319,616 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 657,819,647 657,817,600 7 NTFS / exFAT / HPFS
/dev/sdb2 657,819,648 1,305,669,631 647,849,984 7 NTFS / exFAT / HPFS
/dev/sdb3 1,305,669,632 1,953,519,615 647,849,984 7 NTFS / exFAT / HPFS
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders, total 781422768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 11,718,655 11,716,608 82 Linux swap / Solaris
/dev/sdc2 11,720,702 781,422,591 769,701,890 5 Extended
/dev/sdc5 11,720,704 390,797,311 379,076,608 83 Linux
/dev/sdc6 390,799,360 781,422,591 390,623,232 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 B6D0F12FD0F0F709 ntfs Réservé au système
/dev/sda2 7C00FD1500FCD6DC ntfs SysWin7
/dev/sda3 1A821021821003C3 ntfs Brouillon 7
/dev/sda4 6C461657461621FE ntfs Docs Plexus 7
/dev/sdb1 E6041673041646C9 ntfs Malle
/dev/sdb2 8E307BDD307BCB2B ntfs Besace
/dev/sdb3 1EDE1E47DE1E181B ntfs Saccoche
/dev/sdc1 97897bd3-2a78-47e9-99a0-a29a75755d4a swap
/dev/sdc5 634ea176-ba6b-49cb-aed7-f108e486a397 ext4
/dev/sdc6 7fd2f406-2da5-4efe-a3d0-46c5d736d63b ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdc5 / ext4 (rw,errors=remount-ro)
/dev/sdc6 /home ext4 (rw)
=========================== sdc5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x1024
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, avec Linux 2.6.32-37-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux /boot/vmlinuz-2.6.32-37-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro splash quiet vga=794 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-37-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-37-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
echo 'Chargement de Linux 2.6.32-37-generic ...'
linux /boot/vmlinuz-2.6.32-37-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro single splash quiet vga=794
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-37-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-36-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux /boot/vmlinuz-2.6.32-36-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro splash quiet vga=794 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-36-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-36-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
echo 'Chargement de Linux 2.6.32-36-generic ...'
linux /boot/vmlinuz-2.6.32-36-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro single splash quiet vga=794
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-36-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-35-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux /boot/vmlinuz-2.6.32-35-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro splash quiet vga=794 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-35-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-35-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
echo 'Chargement de Linux 2.6.32-35-generic ...'
linux /boot/vmlinuz-2.6.32-35-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro single splash quiet vga=794
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-35-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-34-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux /boot/vmlinuz-2.6.32-34-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro splash quiet vga=794 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-34-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-34-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
echo 'Chargement de Linux 2.6.32-34-generic ...'
linux /boot/vmlinuz-2.6.32-34-generic root=UUID=634ea176-ba6b-49cb-aed7-f108e486a397 ro single splash quiet vga=794
echo 'Chargement du disque mémoire initial ...'
initrd /boot/initrd.img-2.6.32-34-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd2,5)'
search --no-floppy --fs-uuid --set 634ea176-ba6b-49cb-aed7-f108e486a397
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set B6D0F12FD0F0F709
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sdc5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc5 during installation
UUID=634ea176-ba6b-49cb-aed7-f108e486a397 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdc6 during installation
UUID=7fd2f406-2da5-4efe-a3d0-46c5d736d63b /home ext4 defaults 0 2
/dev/sdc1 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sdc5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
41.716362000 = 44.792602624 boot/grub/core.img 1
122.227741241 = 131.241037824 boot/grub/grub.cfg 1
7.013668060 = 7.530868736 boot/initrd.img-2.6.32-34-generic 2
6.984268188 = 7.499300864 boot/initrd.img-2.6.32-35-generic 2
7.343643188 = 7.885176832 boot/initrd.img-2.6.32-36-generic 2
7.424804688 = 7.972323328 boot/initrd.img-2.6.32-37-generic 2
41.858268738 = 44.944973824 boot/vmlinuz-2.6.32-34-generic 1
41.865547180 = 44.952788992 boot/vmlinuz-2.6.32-35-generic 1
41.844654083 = 44.930355200 boot/vmlinuz-2.6.32-36-generic 1
41.850440979 = 44.936568832 boot/vmlinuz-2.6.32-37-generic 1
7.424804688 = 7.972323328 initrd.img 2
7.343643188 = 7.885176832 initrd.img.old 2
41.850440979 = 44.936568832 vmlinuz 1
41.844654083 = 44.930355200 vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdc2
00000000 ce 01 59 eb e5 0f 11 56 c6 fd 27 54 bd 75 03 8a |..Y....V..'T.u..|
00000010 1d af c0 c8 28 c0 a5 db c0 6e 05 6c a7 9c 00 ed |....(....n.l....|
00000020 98 d8 3a 12 34 45 04 13 ca ec 76 91 c9 0a 20 70 |..:.4E....v... p|
00000030 d5 f5 43 4b de cb 50 5b 29 49 1c 17 f8 f0 35 5f |..CK..P[)I....5_|
00000040 27 9a 00 73 42 80 c7 52 a2 f5 25 f8 bd 22 aa 20 |'..sB..R..%..". |
00000050 c1 41 18 be 34 41 93 3e a2 86 ae af bd 78 82 84 |.A..4A.>.....x..|
00000060 08 d6 c4 0c 97 2c 15 c7 4e 15 72 5d f4 a7 e9 98 |.....,..N.r]....|
00000070 94 94 57 45 fa 24 ea 8e 51 e7 3c c6 c7 4b ad 01 |..WE.$..Q.<..K..|
00000080 8e 43 09 36 8c d0 60 ba 99 4c e0 41 7b 3b ac 5f |.C.6..`..L.A{;._|
00000090 f6 68 f9 a8 6f 8d fe 73 d3 45 a9 c7 c4 57 9d 24 |.h..o..s.E...W.$|
000000a0 05 0f a6 87 19 15 45 2c 6e 42 b2 0d 23 f9 b6 a5 |......E,nB..#...|
000000b0 87 b0 41 c2 b6 75 f4 4b d2 35 e8 38 51 9f 33 1f |..A..u.K.5.8Q.3.|
000000c0 38 d4 bf ce 27 6f d1 20 2e f3 51 1d 04 40 95 11 |8...'o. ..Q..@..|
000000d0 20 0d 2d 23 93 88 b1 fd 6c 62 30 92 ad aa 59 bc | .-#....lb0...Y.|
000000e0 29 48 03 97 74 e6 98 f6 25 2c 55 a9 81 66 49 04 |)H..t...%,U..fI.|
000000f0 98 11 9a 42 40 2f a1 96 3d 17 a6 3c 11 df a9 b6 |...B@/..=..<....|
00000100 26 8e 8b 3f 5a f0 a2 8e 21 4a 3e dd 00 83 07 c3 |&..?Z...!J>.....|
00000110 cb 7e e0 c2 c7 71 69 ed 1f 13 81 26 75 05 74 1a |.~...qi....&u.t.|
00000120 ab d1 ac db 32 4c 6a 62 d7 dd 6c fb 4e 71 82 43 |....2Ljb..l.Nq.C|
00000130 25 cf b1 6d cc 8e c2 12 97 e3 60 b4 37 aa 2d 23 |%..m......`.7.-#|
00000140 99 d8 e7 bc 9a 78 ae 30 0f 52 ca 99 15 72 0d 82 |.....x.0.R...r..|
00000150 c3 42 f2 26 0b c7 9b 7a 38 2b 4a aa a8 80 f8 36 |.B.&...z8+J....6|
00000160 f3 74 a4 0b 49 4f 62 77 a9 c6 b1 0e 65 79 b0 1a |.t..IObw....ey..|
00000170 93 f2 4a 05 16 84 aa 0c 37 98 fc a6 85 03 00 b6 |..J.....7.......|
00000180 91 a2 94 d5 83 a3 75 5a 6a 19 57 6e dd 3b 0d 6e |......uZj.Wn.;.n|
00000190 6e 75 a6 bb 8e 18 bc f4 27 d2 f8 10 84 54 7f 63 |nu......'....T.c|
000001a0 66 10 16 c8 59 26 d5 6a fe 77 df 05 f2 9f 0f b0 |f...Y&.j.w......|
000001b0 7c 9c 51 7a c4 03 b4 69 8f d6 8a d1 ca 4a 00 93 ||.Qz...i.....J..|
000001c0 bb d9 83 fe ff ff 02 00 00 00 00 40 98 16 00 fe |...........@....|
000001d0 ff ff 05 fe ff ff 02 40 98 16 00 78 48 17 00 00 |.......@...xH...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Dans cet extrait de ton fichier grub.cfg (le fichier de configuration de Grub) , on peut voir :
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set B6D0F12FD0F0F709
chainloader +1
}
Ce qui veut dire que quand tu choisis de démarrer sous Windows dans le menu proposé par Grub, la partition cible est sda1 dont l'identifiant UUID est B6D0F12FD0F0F709.
Puisque ça fonctionne bien comme ça quand le démarrage est géré par la partition sda1, il faut que ça se passe de la même façon quand tu décides de démarrer sur ton disque sda. A mon avis, il doit falloir que tu mettes le drapeau (le flag) sur la partition sda1 (alors qu'il se trouve actuellement sur la partition sda2). Tu peux faire ça depuis Windows (de passer la partition sda1 bootable) comme ça au redémarrage, tu pourras vérifier que ça fonctionne.
Si ça se suffit pas, tu lances la réparation automatique de Win7 et ça devrait le faire.
Dernière modification par malbo (Le 20/12/2011, à 11:15)
Hors ligne
#9 Le 20/12/2011, à 14:00
- plexus
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Je comprends mieux et cela est cohérent avec ce que me donne l'utilitaire de disque dur (linux) :
/dev/sda1: (réservé au système)
drapeaux de la partition : -
/dev/sda2: (SysWin7)
drapeaux de la partition : Amorçable
Mais pourquoi est ce comme ça ?
avant de faire le bootrec /fixmbr, (le cd d'install était allé trop vite pour moi) j'ai fait une réparation automatique qui n'avait rien changé au mbr. peut-être est-ce cette manip qui a déplacé les drapeaux ?
Donc normalement avec diskpart sous win7 je devrais pouvoir remettre les choses dans le bon ordre.
je test ce soir, et reviens avec des nouvelles.
Merci de ce brillant éclairage.
Dernière modification par plexus (Le 20/12/2011, à 14:00)
Hors ligne
#10 Le 20/12/2011, à 15:07
- malbo
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
avant de faire le bootrec /fixmbr, (le cd d'install était allé trop vite pour moi) j'ai fait une réparation automatique qui n'avait rien changé au mbr. peut-être est-ce cette manip qui a déplacé les drapeaux ?
Je ne confirme pas.
Dans le post #5, ton Boot Info script initial contenait cette ligne (le symbole * indique que la partition a le drapeau):
/dev/sda2 * 206,848 307,202,047 306,995,200 7 NTFS / exFAT / HPFS
Et ton dernier Boot Info script ( post #8) contient la même ligne :
/dev/sda2 * 206,848 307,202,047 306,995,200 7 NTFS / exFAT / HPFS
Le drapeau a toujours été mal mis (sur sda2 alors qu'il doit être sur sda1). ce n'est pas la réparation automatique qui l'a modifié.
Dernière modification par malbo (Le 20/12/2011, à 15:09)
Hors ligne
#11 Le 20/12/2011, à 19:07
- plexus
Re : [RESOLU] Renseignement deplacer GRUB/DUAL BOOT
Bon tout semble ok !
J'ai remis sda1 actif dans win7 (via le gestionnaire de disque sans diskpart pour aller plus vite) et tout semble ok
je boot bien sur win7 en pointant son DD via le bios et je boot egalement bien dessus via grub.
Un grand merci pour avoir résolu cette erreur que je ne soupçonnais même pas.
Donc il ne me reste plus qu'à trifouiller mes partitions linux avec GPARTED en espérant ne rien perdre...
Merci de l'aide,
je vais modifier en Résolu l'intitulé du post
Hors ligne