#1126 Le 14/01/2012, à 11:13
- orion319
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Bonjour à tous!
Voici le récapitulatif du pb:
j'ai mis oeneric sur l'asus eee pc 1015, bumblebee ne fonctionnant pas, il me met ça:
The Bumblebee X server was not available, please check the
Bumblebee logfile at /var/log/bumblebee.log
==================================================
après avoir tapé ça : ldd /usr/lib/xorg/modules/extensions/libglx.so, il met :
linux-gate.so.1 => (0x005e3000)
libdl.so.2 => /lib/i386-linux-gnu/libdl.so.2 (0x004ce000)
libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0x00a51000)
/lib/ld-linux.so.2 (0x00337000)
et ça :
ldd: /usr/lib/xorg/modules/libglx.so: Aucun fichier ou dossier de ce type
/var/log/bumblebee.log :
[ 793.80] Bumblebee log started at Tue, 10 Jan 2012 19:27:31 +0100
[ 793.81] Creating fifo /var/run/bumblebee.fifo for communication...
[ 793.86] Making FIFO writable for members of group bumblebee
[ 793.87] Power management is disabled, not disabling card on start.
[ 793.89] Waiting for orders
[ 1284.89] Bumblebee log started at Tue, 10 Jan 2012 19:35:42 +0100
[ 1284.90] Creating fifo /var/run/bumblebee.fifo for communication...
[ 1284.92] Making FIFO writable for members of group bumblebee
[ 1284.94] Power management is disabled, not disabling card on start.
[ 1284.95] Waiting for orders
[ 1325.71] Checking for X server availability before stopping it...
[ 1325.73] The X server has not started or the pidfile is invalid.
[ 1325.75] X is stopped.
[ 1325.77] Power management is disabled, not unloading driver
[ 1325.80] Power management is disabled, card already enabled.
[ 1325.84] Bumblebee log ended on Tue, 10 Jan 2012 19:36:23 +0100
[ 1326.95] Checking for X server availability before stopping it...
[ 1326.97] The X server has not started or the pidfile is invalid.
[ 1326.99] X is stopped.
[ 1327.00] Power management is disabled, not unloading driver
[ 1327.03] Power management is disabled, card already enabled.
[ 1327.05] Bumblebee log ended on Tue, 10 Jan 2012 19:36:24 +0100
[ 24.42] Bumblebee log started at Tue, 10 Jan 2012 19:37:27 +0100
[ 24.43] Creating fifo /var/run/bumblebee.fifo for communication...
[ 24.54] Making FIFO writable for members of group bumblebee
[ 24.59] Power management is disabled, not disabling card on start.
[ 24.60] Waiting for orders
[ 1952.13] Optirun start request received.
[ 1952.14] Checking for X server availability before starting X...
[ 1952.15] X server is not started
[ 1952.16] Power management is disabled, only loading driver
[ 1956.60] FATAL: Module nouveau is in use.
[ 1956.60] insmod /lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko
[ 1956.60] FATAL: Error inserting nvidia_current (/lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko): No such device
[ 1956.61] The driver failed to load.
[ 1956.63] Waiting for orders
[ 2630.97] Checking for X server availability before stopping it...
[ 2630.99] The X server has not started or the pidfile is invalid.
[ 2631.01] X is stopped.
[ 2631.03] Power management is disabled, not unloading driver
[ 2631.05] Power management is disabled, card already enabled.
[ 2631.10] Bumblebee log ended on Tue, 10 Jan 2012 20:20:54 +0100
[ 22.85] Bumblebee log started at Tue, 10 Jan 2012 20:42:48 +0100
[ 22.87] Creating fifo /var/run/bumblebee.fifo for communication...
[ 22.89] Making FIFO writable for members of group bumblebee
[ 22.92] Power management is disabled, not disabling card on start.
[ 22.94] Waiting for orders
[ 809.57] Optirun start request received.
[ 809.58] Checking for X server availability before starting X...
[ 809.60] X server is not started
[ 809.61] Power management is disabled, only loading driver
[ 814.06] FATAL: Module nouveau is in use.
[ 814.06] insmod /lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko
[ 814.06] FATAL: Error inserting nvidia_current (/lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko): No such device
[ 814.07] The driver failed to load.
[ 814.09] Waiting for orders
[ 7111.12] Checking for X server availability before stopping it...
[ 7111.14] The X server has not started or the pidfile is invalid.
[ 7111.15] X is stopped.
[ 7111.17] Power management is disabled, not unloading driver
[ 7111.18] Power management is disabled, card already enabled.
[ 7111.21] Bumblebee log ended on Tue, 10 Jan 2012 22:40:56 +0100
[ 26.08] Bumblebee log started at Wed, 11 Jan 2012 21:54:12 +0100
[ 26.24] Creating fifo /var/run/bumblebee.fifo for communication...
[ 26.26] Making FIFO writable for members of group bumblebee
[ 26.28] Power management is disabled, not disabling card on start.
[ 26.31] Waiting for orders
[ 726.88] Optirun start request received.
[ 726.89] Checking for X server availability before starting X...
[ 726.90] X server is not started
[ 726.92] Power management is disabled, only loading driver
[ 731.37] FATAL: Module nouveau is in use.
[ 731.37] insmod /lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko
[ 731.37] FATAL: Error inserting nvidia_current (/lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko): No such device
[ 731.38] The driver failed to load.
[ 731.40] Waiting for orders
[ 1482.56] Checking for X server availability before stopping it...
[ 1482.59] The X server has not started or the pidfile is invalid.
[ 1482.61] X is stopped.
[ 1482.64] Power management is disabled, not unloading driver
[ 1482.67] Power management is disabled, card already enabled.
[ 1482.70] Bumblebee log ended on Wed, 11 Jan 2012 22:18:27 +0100
[ 25.98] Bumblebee log started at Fri, 13 Jan 2012 18:22:46 +0100
[ 26.05] Creating fifo /var/run/bumblebee.fifo for communication...
[ 26.09] Making FIFO writable for members of group bumblebee
[ 26.14] Power management is disabled, not disabling card on start.
[ 26.17] Waiting for orders
[ 1061.84] Checking for X server availability before stopping it...
[ 1061.86] The X server has not started or the pidfile is invalid.
[ 1061.87] X is stopped.
[ 1061.88] Power management is disabled, not unloading driver
[ 1061.89] Power management is disabled, card already enabled.
[ 1061.91] Bumblebee log ended on Fri, 13 Jan 2012 18:39:58 +0100
[ 1063.11] Bumblebee log started at Fri, 13 Jan 2012 18:39:59 +0100
[ 1063.12] Creating fifo /var/run/bumblebee.fifo for communication...
[ 1063.14] Making FIFO writable for members of group bumblebee
[ 1063.40] Unloading driver 'nouveau' on start...
[ 1063.71] FATAL: Module nouveau is in use.
[ 1063.72] The driver could not be unloaded on start.
[ 1063.73] Waiting for orders
[ 1078.05] Checking for X server availability before stopping it...
[ 1078.07] The X server has not started or the pidfile is invalid.
[ 1078.09] X is stopped.
[ 1078.11] Unloading driver...
[ 1078.50] FATAL: Module nouveau is in use.
[ 1078.52] The driver could not be unloaded.
[ 1078.53] Perhaps another program is using it.
[ 1078.55] Enabling graphics card before stopping daemon...
[ 1078.86]
[ 1078.88] Bumblebee log ended on Fri, 13 Jan 2012 18:40:15 +0100
[ 24.11] Bumblebee log started at Fri, 13 Jan 2012 20:47:41 +0100
[ 24.12] Creating fifo /var/run/bumblebee.fifo for communication...
[ 24.14] Making FIFO writable for members of group bumblebee
[ 24.59] Unloading driver 'nouveau' on start...
[ 25.15] FATAL: Module nouveau is in use.
[ 25.16] The driver could not be unloaded on start.
[ 25.18] Waiting for orders
[ 1347.34] Checking for X server availability before stopping it...
[ 1347.36] The X server has not started or the pidfile is invalid.
[ 1347.38] X is stopped.
[ 1347.40] Unloading driver...
[ 1347.71] FATAL: Module nouveau is in use.
[ 1347.72] The driver could not be unloaded.
[ 1347.73] Perhaps another program is using it.
[ 1347.74] Enabling graphics card before stopping daemon...
[ 1348.00]
[ 1348.02] Bumblebee log ended on Fri, 13 Jan 2012 21:09:45 +0100
[ 20.61] Bumblebee log started at Fri, 13 Jan 2012 22:32:41 +0100
[ 20.63] Creating fifo /var/run/bumblebee.fifo for communication...
[ 20.65] Making FIFO writable for members of group bumblebee
[ 21.10] Unloading driver 'agpgart-intel
[ 21.10] i915
[ 21.10] HDA Intel
[ 21.10] pcieport
[ 21.10] pcieport
[ 21.10] pcieport
[ 21.10] uhci_hcd
[ 21.10] uhci_hcd
[ 21.10] uhci_hcd
[ 21.10] uhci_hcd
[ 21.10] ehci_hcd
[ 21.10] ahci
[ 21.10] atl1c
[ 21.10] brcmsmac' on start...
[ 21.71] Driver 'agpgart-intel
[ 21.71] i915
[ 21.71] HDA Intel
[ 21.71] pcieport
[ 21.71] pcieport
[ 21.71] pcieport
[ 21.71] uhci_hcd
[ 21.71] uhci_hcd
[ 21.71] uhci_hcd
[ 21.71] uhci_hcd
[ 21.71] ehci_hcd
[ 21.71] ahci
[ 21.71] atl1c
[ 21.71] brcmsmac' has no matching kernel module installed
[ 21.71] ERROR: Module agpgart_intel
[ 21.71] i915
[ 21.71] HDA Intel
[ 21.71] pcieport
[ 21.71] pcieport
[ 21.71] pcieport
[ 21.71] uhci_hcd
[ 21.71] uhci_hcd
[ 21.71] uhci_hcd
[ 21.71] uhci_hcd
[ 21.71] ehci_hcd
[ 21.71] ahci
[ 21.71] atl1c
[ 21.71] brcmsmac does not exist in /proc/modules
[ 21.72] The driver could not be unloaded on start.
[ 21.73] Waiting for orders
[ 200.85] Optirun start request received.
[ 200.86] Checking for X server availability before starting X...
[ 200.87] X server is not started
[ 200.88] Enabling graphics card...
[ 201.15]
[ 201.16] Loading driver...
[ 205.35] Driver 'agpgart-intel
[ 205.35] i915
[ 205.35] HDA Intel
[ 205.35] pcieport
[ 205.35] pcieport
[ 205.35] pcieport
[ 205.35] uhci_hcd
[ 205.35] uhci_hcd
[ 205.35] uhci_hcd
[ 205.35] uhci_hcd
[ 205.35] ehci_hcd
[ 205.35] ahci
[ 205.35] atl1c
[ 205.35] brcmsmac' has no matching kernel module installed
[ 205.35] ERROR: Module agpgart_intel
[ 205.35] i915
[ 205.35] HDA Intel
[ 205.35] pcieport
[ 205.35] pcieport
[ 205.35] pcieport
[ 205.35] uhci_hcd
[ 205.35] uhci_hcd
[ 205.35] uhci_hcd
[ 205.35] uhci_hcd
[ 205.35] ehci_hcd
[ 205.35] ahci
[ 205.35] atl1c
[ 205.35] brcmsmac does not exist in /proc/modules
[ 205.35] insmod /lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko
[ 205.35] FATAL: Error inserting nvidia_current (/lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko): No such device
[ 205.36] The driver failed to load.
[ 205.38] Waiting for orders
[ 236.32] Checking for X server availability before stopping it...
[ 236.34] The X server has not started or the pidfile is invalid.
[ 236.37] X is stopped.
[ 236.40] Unloading driver...
[ 236.76] Driver 'agpgart-intel
[ 236.76] i915
[ 236.76] HDA Intel
[ 236.76] pcieport
[ 236.76] pcieport
[ 236.76] pcieport
[ 236.76] uhci_hcd
[ 236.76] uhci_hcd
[ 236.76] uhci_hcd
[ 236.76] uhci_hcd
[ 236.76] ehci_hcd
[ 236.76] ahci
[ 236.76] atl1c
[ 236.76] brcmsmac' has no matching kernel module installed
[ 236.76] ERROR: Module agpgart_intel
[ 236.76] i915
[ 236.76] HDA Intel
[ 236.76] pcieport
[ 236.76] pcieport
[ 236.76] pcieport
[ 236.76] uhci_hcd
[ 236.76] uhci_hcd
[ 236.76] uhci_hcd
[ 236.76] uhci_hcd
[ 236.76] ehci_hcd
[ 236.76] ahci
[ 236.76] atl1c
[ 236.76] brcmsmac does not exist in /proc/modules
[ 236.77] The driver could not be unloaded.
[ 236.78] Perhaps another program is using it.
[ 236.79] Enabling graphics card before stopping daemon...
[ 237.10]
[ 237.11] Bumblebee log ended on Fri, 13 Jan 2012 22:36:17 +0100
[ 25.34] Bumblebee log started at Fri, 13 Jan 2012 22:40:16 +0100
[ 25.36] Creating fifo /var/run/bumblebee.fifo for communication...
[ 25.38] Making FIFO writable for members of group bumblebee
[ 25.75] Unloading driver 'nouveau' on start...
[ 26.26] FATAL: Module nouveau is in use.
[ 26.27] The driver could not be unloaded on start.
[ 26.28] Waiting for orders
[ 58.98] Checking for X server availability before stopping it...
[ 59.01] The X server has not started or the pidfile is invalid.
[ 59.02] X is stopped.
[ 59.04] Unloading driver...
[ 59.38] FATAL: Module nouveau is in use.
[ 59.39] The driver could not be unloaded.
[ 59.40] Perhaps another program is using it.
[ 59.41] Enabling graphics card before stopping daemon...
[ 59.67]
[ 59.70] Bumblebee log ended on Fri, 13 Jan 2012 22:40:50 +0100
[ 20.22] Bumblebee log started at Fri, 13 Jan 2012 22:43:48 +0100
[ 20.25] Creating fifo /var/run/bumblebee.fifo for communication...
[ 20.27] Making FIFO writable for members of group bumblebee
[ 20.66] Unloading driver 'agpgart-intel
[ 20.66] i915
[ 20.66] HDA Intel
[ 20.66] pcieport
[ 20.66] pcieport
[ 20.66] pcieport
[ 20.66] uhci_hcd
[ 20.66] uhci_hcd
[ 20.66] uhci_hcd
[ 20.66] uhci_hcd
[ 20.66] ehci_hcd
[ 20.66] ahci
[ 20.66] atl1c
[ 20.66] brcmsmac' on start...
[ 21.63] Driver 'agpgart-intel
[ 21.63] i915
[ 21.63] HDA Intel
[ 21.63] pcieport
[ 21.63] pcieport
[ 21.63] pcieport
[ 21.63] uhci_hcd
[ 21.63] uhci_hcd
[ 21.63] uhci_hcd
[ 21.63] uhci_hcd
[ 21.63] ehci_hcd
[ 21.63] ahci
[ 21.63] atl1c
[ 21.63] brcmsmac' has no matching kernel module installed
[ 21.63] ERROR: Module agpgart_intel
[ 21.63] i915
[ 21.63] HDA Intel
[ 21.63] pcieport
[ 21.63] pcieport
[ 21.63] pcieport
[ 21.63] uhci_hcd
[ 21.63] uhci_hcd
[ 21.63] uhci_hcd
[ 21.63] uhci_hcd
[ 21.63] ehci_hcd
[ 21.63] ahci
[ 21.63] atl1c
[ 21.63] brcmsmac does not exist in /proc/modules
[ 21.64] The driver could not be unloaded on start.
[ 21.67] Waiting for orders
[ 154.21] Checking for X server availability before stopping it...
[ 154.23] The X server has not started or the pidfile is invalid.
[ 154.25] X is stopped.
[ 154.26] Unloading driver...
[ 154.64] Driver 'agpgart-intel
[ 154.64] i915
[ 154.64] HDA Intel
[ 154.64] pcieport
[ 154.64] pcieport
[ 154.64] pcieport
[ 154.64] uhci_hcd
[ 154.64] uhci_hcd
[ 154.64] uhci_hcd
[ 154.64] uhci_hcd
[ 154.64] ehci_hcd
[ 154.64] ahci
[ 154.64] atl1c
[ 154.64] brcmsmac' has no matching kernel module installed
[ 154.64] ERROR: Module agpgart_intel
[ 154.64] i915
[ 154.64] HDA Intel
[ 154.64] pcieport
[ 154.64] pcieport
[ 154.64] pcieport
[ 154.64] uhci_hcd
[ 154.64] uhci_hcd
[ 154.64] uhci_hcd
[ 154.64] uhci_hcd
[ 154.64] ehci_hcd
[ 154.64] ahci
[ 154.64] atl1c
[ 154.64] brcmsmac does not exist in /proc/modules
[ 154.66] The driver could not be unloaded.
[ 154.66] Perhaps another program is using it.
[ 154.68] Enabling graphics card before stopping daemon...
[ 154.96]
[ 154.98] Bumblebee log ended on Fri, 13 Jan 2012 22:46:03 +0100
[ 23.83] Bumblebee log started at Fri, 13 Jan 2012 22:46:58 +0100
[ 23.84] Creating fifo /var/run/bumblebee.fifo for communication...
[ 23.85] Making FIFO writable for members of group bumblebee
[ 24.35] Unloading driver 'nouveau' on start...
[ 24.89] FATAL: Module nouveau is in use.
[ 24.90] The driver could not be unloaded on start.
[ 24.92] Waiting for orders
[ 57.34] Checking for X server availability before stopping it...
[ 57.36] The X server has not started or the pidfile is invalid.
[ 57.38] X is stopped.
[ 57.40] Unloading driver...
[ 57.71] FATAL: Module nouveau is in use.
[ 57.72] The driver could not be unloaded.
[ 57.72] Perhaps another program is using it.
[ 57.73] Enabling graphics card before stopping daemon...
[ 58.00]
[ 58.02] Bumblebee log ended on Fri, 13 Jan 2012 22:47:33 +0100
[ 20.74] Bumblebee log started at Fri, 13 Jan 2012 22:53:22 +0100
[ 20.76] Creating fifo /var/run/bumblebee.fifo for communication...
[ 20.78] Making FIFO writable for members of group bumblebee
[ 21.22] Unloading driver 'agpgart-intel
[ 21.22] i915
[ 21.22] HDA Intel
[ 21.22] pcieport
[ 21.22] pcieport
[ 21.22] pcieport
[ 21.22] uhci_hcd
[ 21.22] uhci_hcd
[ 21.22] uhci_hcd
[ 21.22] uhci_hcd
[ 21.22] ehci_hcd
[ 21.22] ahci
[ 21.22] atl1c
[ 21.22] brcmsmac' on start...
[ 22.06] Driver 'agpgart-intel
[ 22.06] i915
[ 22.06] HDA Intel
[ 22.06] pcieport
[ 22.06] pcieport
[ 22.06] pcieport
[ 22.06] uhci_hcd
[ 22.06] uhci_hcd
[ 22.06] uhci_hcd
[ 22.06] uhci_hcd
[ 22.06] ehci_hcd
[ 22.06] ahci
[ 22.06] atl1c
[ 22.06] brcmsmac' has no matching kernel module installed
[ 22.06] ERROR: Module agpgart_intel
[ 22.06] i915
[ 22.06] HDA Intel
[ 22.06] pcieport
[ 22.06] pcieport
[ 22.06] pcieport
[ 22.06] uhci_hcd
[ 22.06] uhci_hcd
[ 22.06] uhci_hcd
[ 22.06] uhci_hcd
[ 22.06] ehci_hcd
[ 22.06] ahci
[ 22.06] atl1c
[ 22.06] brcmsmac does not exist in /proc/modules
[ 22.07] The driver could not be unloaded on start.
[ 22.08] Waiting for orders
[ 69.66] Checking for X server availability before stopping it...
[ 69.68] The X server has not started or the pidfile is invalid.
[ 69.71] X is stopped.
[ 69.72] Unloading driver...
[ 70.08] Driver 'agpgart-intel
[ 70.08] i915
[ 70.08] HDA Intel
[ 70.08] pcieport
[ 70.08] pcieport
[ 70.08] pcieport
[ 70.08] uhci_hcd
[ 70.08] uhci_hcd
[ 70.08] uhci_hcd
[ 70.08] uhci_hcd
[ 70.08] ehci_hcd
[ 70.08] ahci
[ 70.08] atl1c
[ 70.08] brcmsmac' has no matching kernel module installed
[ 70.08] ERROR: Module agpgart_intel
[ 70.08] i915
[ 70.08] HDA Intel
[ 70.08] pcieport
[ 70.08] pcieport
[ 70.08] pcieport
[ 70.08] uhci_hcd
[ 70.08] uhci_hcd
[ 70.08] uhci_hcd
[ 70.08] uhci_hcd
[ 70.08] ehci_hcd
[ 70.08] ahci
[ 70.08] atl1c
[ 70.08] brcmsmac does not exist in /proc/modules
[ 70.09] The driver could not be unloaded.
[ 70.10] Perhaps another program is using it.
[ 70.11] Enabling graphics card before stopping daemon...
[ 70.46]
[ 70.48] Bumblebee log ended on Fri, 13 Jan 2012 22:54:12 +0100
[ 24.21] Bumblebee log started at Fri, 13 Jan 2012 22:55:08 +0100
[ 24.23] Creating fifo /var/run/bumblebee.fifo for communication...
[ 24.25] Making FIFO writable for members of group bumblebee
[ 24.66] Unloading driver 'nouveau' on start...
[ 25.21] FATAL: Module nouveau is in use.
[ 25.22] The driver could not be unloaded on start.
[ 25.23] Waiting for orders
[ 54.59] Checking for X server availability before stopping it...
[ 54.61] The X server has not started or the pidfile is invalid.
[ 54.62] X is stopped.
[ 54.64] Unloading driver...
[ 54.98] FATAL: Module nouveau is in use.
[ 54.99] The driver could not be unloaded.
[ 55.00] Perhaps another program is using it.
[ 55.01] Enabling graphics card before stopping daemon...
[ 55.31]
[ 55.32] Bumblebee log ended on Fri, 13 Jan 2012 22:55:39 +0100
[ 23.90] Bumblebee log started at Fri, 13 Jan 2012 22:59:51 +0100
[ 23.91] Creating fifo /var/run/bumblebee.fifo for communication...
[ 23.92] Making FIFO writable for members of group bumblebee
[ 24.32] Unloading driver 'nouveau' on start...
[ 24.98] FATAL: Module nouveau is in use.
[ 26.01] The driver could not be unloaded on start.
[ 26.03] Waiting for orders
[ 1204.58] Checking for X server availability before stopping it...
[ 1204.61] The X server has not started or the pidfile is invalid.
[ 1204.62] X is stopped.
[ 1204.63] Unloading driver...
[ 1204.95] FATAL: Module nouveau is in use.
[ 1204.96] The driver could not be unloaded.
[ 1204.97] Perhaps another program is using it.
[ 1204.98] Enabling graphics card before stopping daemon...
[ 1205.27]
[ 1205.29] Bumblebee log ended on Fri, 13 Jan 2012 23:19:32 +0100
[ 24.62] Bumblebee log started at Sat, 14 Jan 2012 10:58:25 +0100
[ 24.64] Creating fifo /var/run/bumblebee.fifo for communication...
[ 24.67] Making FIFO writable for members of group bumblebee
[ 25.06] Unloading driver 'nouveau' on start...
[ 25.64] FATAL: Module nouveau is in use.
[ 25.65] The driver could not be unloaded on start.
[ 25.66] Waiting for orderset c'est normal qu'il n'y rien d'écrit dans "/var/log/Xorg.8.log"?
Par ailleur, la batterie descent très vite... 
merci d'avance 
Dernière modification par orion319 (Le 14/01/2012, à 11:15)
Hors ligne
#1127 Le 14/01/2012, à 15:17
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
\o/ Merci, bonne nouvelle. J'espère que ça ne tardera pas, as-tu une idée des délais ?
Puis-je retirer l'option intel_iommu=off de mon GRUB ?Merci pour ton aide en tout cas!
Oui tu peux.
@orion319 : Euh ton log fait peur, c'est pas du tout prévu que le genre de choses qu'il affiche soient possibles.
En attendant, on va essayer ceci :
sudo gedit /etc/modprobe.d/blacklist-nouveau.confDans la fenêtre qui s'ouvre, tu tapes ceci :
blacklist nouveauTu enregistres et tu fermes. Dans un terminal :
sudo update-initramfs -uPuis tu redémarres, et ré-essayes optirun.
Hors ligne
#1128 Le 14/01/2012, à 17:11
- orion319
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
re,
ben c'est très bizarre, il m'a mis une résolution qui pique les yeux au démarrage à 680*400 et impossible de le modifier!!
et quand j'ai essayé glxspheres : 2.5 images par sec!
mais pour optirun glxspheres : écran tout noir et quand j'ai fait échap, il a indiqué 45 images par secondes ce qui prouve qu'il a bien basculé. Mais ça marche pas fort...
Hors ligne
#1129 Le 14/01/2012, à 17:14
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Euh, que donne :
lspci -vHors ligne
#1130 Le 14/01/2012, à 19:02
- orion319
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
paul@paul-1015PN:~$ lspci -v
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 83ac
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 841c
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f5efc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f3ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f6000000-f9ffffff
Prefetchable memory behind bridge: 00000000dc000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f5f00000-f5ffffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 83ad
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at c480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 83ad
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at c800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 83ad
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at c880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 83ad
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at cc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 83ad
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f5efbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 83ad
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 83ad
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 43
I/O ports at c400 [size=8]
I/O ports at c080 [size=4]
I/O ports at c000 [size=8]
I/O ports at bc00 [size=4]
I/O ports at b880 [size=32]
Memory at f5efb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
Subsystem: ASUSTeK Computer Inc. Device 838a
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at f5fc0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at dc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
Kernel modules: atl1c
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
Subsystem: AzureWave Device 2047
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f9ffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
Kernel modules: wl, bcma, brcmsmac
04:00.0 VGA compatible controller: nVidia Corporation GT218 [ION] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8470
Flags: fast devsel, IRQ 16
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f2000000 (64-bit, prefetchable) [size=32M]
I/O ports at ec00 [size=128]
Expansion ROM at fbf00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nvidia_current, nouveau, nvidiafb
04:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 8470
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fbffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
paul@paul-1015PN:~$un indice qui peut peut-etre aider :
avant le splashscreen de démarrage ne marchait pas et était tout moche, et mnt il s'affiche corectement.
++
Hors ligne
#1131 Le 14/01/2012, à 19:33
- passe-partout
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Bonjour,
Il semble que l'installation de Bumblebee sur l'inspiron 15R de ma femme se soit bien passé.
"glxspheres" dit fonctionner avec le DRI des Sandy Bridges, lorsque "optirun glxspheres" dit fonctionner avec la geforce 525M.
J'ai trouvé des lignes a mettre dans "cardon" et "cardoff" et activé le "power management" dans bumblebee.conf.
Je me demande juste comment vérifier que la carte s'arrête vraiment?
Parce que là, je trouve que le ventilo souffle encore souvent bien fort.
Edit:
j'ai trouvé, dans la page de la doc , cette commande:
grep rate /proc/acpi/battery/BAT0/stateQui permet de connaître la consommation. (par contre j'ai un résultat en mA, non en mW)
J'ai une baisse d'environ 1500 mA entre les deux états. (quasi 40% de moins)
Dernière modification par passe-partout (Le 14/01/2012, à 20:16)
Hors ligne
#1132 Le 15/01/2012, à 16:26
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
@orion319 : Pas d'Optimus sur cette machine, donc fais ceci :
sudo apt-get purge bumblebee nvidia-current acpi-call-tools virtualglsudo rm /etc/modprobe.d/blacklist-nouveau.confsudo update-initramfs -uRedémarres. Puis :
sudo apt-get install nvidia-currentNormalement ton système devrait fonctionner.
@passe-partout: Lorsque la carte devrait être éteinte, essayes ceci :
lspci -v -d 10de:Hors ligne
#1133 Le 16/01/2012, à 01:40
- david breizh
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
bonjour voilà j'ai installé bumblebee sur un asus k53sc mais je n'est pas trouvé les appels acpi sur ce modèle sinon le reste c'est bon je peux poster ici les fichiers avec le script get_acpi_call que j'ai envoyé sur le launchpad comme demandé ou si quelqu'un a ce modèle s'il pouvait mettre les deux appels, j'en serais très content.merci et bonne continuation .
ah ! du fin fond de la bretagne grâce au libre on se sent moins seul!
Vive le libre et toutes les distributions qui m'ont fait découvrir le monde de linux!
Hors ligne
#1134 Le 16/01/2012, à 13:30
- orion319
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
@archangegabriel : merci c'est retourné à la normale! 
et j'ajouterai quelque chose pour les possesseurs d'asus eee pc 1015pn :
http://sites.google.com/site/mtrons/howtos/eeepc-1015pn
Hors ligne
#1135 Le 16/01/2012, à 13:42
- chihuahua
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Je viens de voir que la version 3.0 de bumblebee est en préparation..
Je me demandais, vous avez réussis à gérer le multi écran ?
merci
Dell latitude E6420 W7 / ubuntu 11.10
Hors ligne
#1136 Le 16/01/2012, à 23:42
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
@david breizh : désolé, pas le temps de chercher ça maintenant, de toutes façons la version 3.0 qui sera là avant la fin de la semaine rendra cela inutile.
@chihuahua : Non, cela ne faisait pas partie de notre travail sur cette version. De toutes façons, je pense que nous informerions tout le monde de la moindre découverte utile faite dans ce sens.
Hors ligne
#1137 Le 17/01/2012, à 05:56
- Nepenthes
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
On va avoir un dépôt pour Precise ?
Au fait, des nouvelles du côté de windump ? Je n'ai pas vu d'activité récente sur github, le développement est en pause ?
Dernière modification par Nepenthes (Le 17/01/2012, à 13:22)
Hors ligne
#1138 Le 17/01/2012, à 23:18
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Nepenthes : Oui, on a prévu un dépôt pour Precise (si tu parlais du PPA).
Pour windump, on laisse LLStarks bidouiller de ce côté, notre nouveau dev a une meilleure idée.
Hors ligne
#1139 Le 18/01/2012, à 09:39
- Yeti_69
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Bonjour à tous et déjà un grand merci à l'équipe de développement de Bumblebee.
Pour apporter un peu d'eau au moulin, voici le PC que je viens d'acheter : Dell Inspiron 15R avec I3-2330M et un GPU Geforce GT525M.
Je ne l'ai pas encore déballé mais une des premières choses que j'aimerai faire, c'est de le passer en dual boot avec Ubuntu 11.10. En ce qui concerne la version de Bumblebee, pensez-vous qu'il faut que j'attende la version 3 avant que je fasse quoi que ce soit ? Et est ce que quelqu'un a réussi l'installation de Bumblebee sur une même machine ?
Hors ligne
#1140 Le 18/01/2012, à 17:57
- Nepenthes
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
@Archange : une meilleure idée ? Un autre logiciel comme remplaçant de virtualGL ?
Hors ligne
#1141 Le 18/01/2012, à 18:13
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
@Yeti_69 : Oui, le temps que tu installes Ubuntu la 3.0 sera là.
@Nepenthes : Un logiciel aura toujours des limitations. L'idée est qu'avec toutes nos connaissances acquises durant le développement et certaines choses qui existent déjà, il devrait maintenant être possible de faire quelque chose de beaucoup mieux (et que l'on sait pour sûr qu'il marche, car cela existe déjà pour d'autres programmes). En fait, que se passe-t-il avec VirtualGL ? On lance un programme sur le serveur principal, on compresse les commandes, on les envoies sur l'autre serveur, on décompresse, ça tourne sur la carte, qui donne des images, on les compresses, on les envoies au premier serveur, on décompresse, on copie sur la carte Intel, et c'est affiché. Donc chaque instruction/image est copiée 6 fois, et encore en supposant que c'est optimisé. Or, vu que VirtualGL à la base c'est pour transférer cela sur des réseaux Internet entre son ordinateur et un serveur (et donc clairement pas conçu pour ce que nous en faisons, comme nous le rappelle souvent son développeur), c'est probablement pas son plus gros problème. Maintenant, on se dirige vers une approche de Compositing Window Manager, (ce que fait compiz notamment), où les informations sont envoyées directement à la carte nVidia, qui copie ses résultats directement à l'écran. Windump se situait entre les deux, et il n'y a a priori aucune limitation à ce qui est possible de faire avec un CWM. En effet, en théorie, c'est comme si la carte était la seule. D'où les nombreux avantages (plus de limitation de support des technologies par VirtualGL, possibilité d'utiliser VDPAU et VAAPI, et gain de performances à situer entre un facteur 10 et 100 (quand Windump apportait un gain entre 2 et 10).
Par contre, car il faut bien qu'il y ait un mais à un tel changement, c'est beaucoup de travail, et cela prendra un certain temps.
Dernière modification par ArchangeGabriel (Le 18/01/2012, à 18:14)
Hors ligne
#1142 Le 20/01/2012, à 00:52
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
C'est parti ! La 3.0 est dans le PPA, la mise à jour se déroule sans problème depuis la 2.4.1.
Je ferais un message plus détaillé demain, et je mettrais à jour le premier post et la doc par la même occasion.
Hors ligne
#1143 Le 20/01/2012, à 06:59
- Yeti_69
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
C'est parti ! La 3.0 est dans le PPA, la mise à jour se déroule sans problème depuis la 2.4.1.
Je ferais un message plus détaillé demain, et je mettrais à jour le premier post et la doc par la même occasion.
Super, comme tu les disais, ça m'a juste donné le temps d'installer Ubuntu. Là je découvre mon nouveau PC, on dirait qu'il fonctionne bien sur Ubuntu mais il chauffe donc je pense que les deux cartes graphiques sont allumée... (sans grande surprise). J'essaie de tester la version 3.0 ce week end ! 
Hors ligne
#1144 Le 20/01/2012, à 08:11
- Nepenthes
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Bumblebee mis à jour, tout fonctionne comme en 2.4.1.
Les seuls soucis que j'ai étaient liés à l'installation manuelle d'une version de debug de bumblebee 2.4.1, que j'ai du désinstaller manuellement pour que la 3.0 fonctionne normalement.
Hors ligne
#1145 Le 20/01/2012, à 12:43
- Jackovic
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Hello et merci pour le travail effectué pour faire fonctionner les cartes NVidia avec la technologie Optimus sur Linux.
J'ai effectué la mise à jour en 3.0 il y a trente minutes environ et lorsque je rentre dans un terminal :
$ optirun glxspheres
J'ai ce message :
[ERROR]Cannot access secondary GPU - error: [XORG] (EE) [drm] failed to open device
[ERROR]Aborting because fallback start is disabled.
Que dois-je faire pour m'en sortir ?
Je suis sous Ubuntu 11.04 avec une carte NVidia GeForce GT 555 sur un Asus N55S.
Merci.
++
Jack
Hors ligne
#1146 Le 20/01/2012, à 15:35
- n_faivre
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
De mon côté, la mise à jour s'est bien passée du côté install.
La carte semble éteinte :
nathan@nathan:~$ lspci -v -s 01:00.0
01:00.0 VGA compatible controller: nVidia Corporation Device 1050 (rev ff) (prog-if ff)
!!! Unknown header type 7fEn revanche, j'obtiens maintenant des résultats moins bons avec optirun glxspheres qu'avec glxspheres !
glxspheres
Polygons in scene: 62464
Visual ID of window: 0x95
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile
57.923051 frames/sec - 51.139103 Mpixels/sec
59.379282 frames/sec - 52.424781 Mpixels/sec
59.302495 frames/sec - 52.356987 Mpixels/sec
nathan@nathan:~$ optirun glxspheres
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: GeForce GT 520M/PCI/SSE2
53.875340 frames/sec - 47.565461 Mpixels/sec
55.623277 frames/sec - 49.108679 Mpixels/sec
56.353296 frames/sec - 49.753198 Mpixels/secHors ligne
#1147 Le 20/01/2012, à 18:31
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Hello et merci pour le travail effectué pour faire fonctionner les cartes NVidia avec la technologie Optimus sur Linux.
J'ai effectué la mise à jour en 3.0 il y a trente minutes environ et lorsque je rentre dans un terminal :
$ optirun glxspheresJ'ai ce message :
[ERROR]Cannot access secondary GPU - error: [XORG] (EE) [drm] failed to open device
[ERROR]Aborting because fallback start is disabled.Que dois-je faire pour m'en sortir ?
Je suis sous Ubuntu 11.04 avec une carte NVidia GeForce GT 555 sur un Asus N55S.
Merci.
++Jack
Il me faudrait voir les contenus des fichier sys.log et kern.log (dans /var/log) correspondant à ces essais.
@n_faivre : Si tu vois vraiment tes pertes dans les jeux/applications 3D lourdes, signale-le moi, sur glxspheres, il y a trop de paramètres en jeu pour que ce soit significatif. Accessoirement, tu peux essayer un autre type de compression (xv, rgb, yuv).
Dernière modification par ArchangeGabriel (Le 20/01/2012, à 18:32)
Hors ligne
#1148 Le 20/01/2012, à 22:18
- Yeti_69
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Aucun problème à l'installation (install neuve en 3.0) et à l'exécution. Est ce que grâce à Bumblebee, lorsque je n'utilise pas la carte NVIDIA, cette dernière n'est plus alimentée ? Si tout va bien je devrai gagner en autonomie par voie de conséquence ? En tout cas, je ne sais pas si c'est une coïncidence, mais le PC ventile et chauffe moins (c'est un retour comme un autre !).
Hors ligne
#1149 Le 20/01/2012, à 22:20
- ArchangeGabriel
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
Oui. Oui. Pas une coïncidence.
Hors ligne
#1150 Le 21/01/2012, à 11:08
- GP974
Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus
bonjour
je viens de faire l’installation de bumblebee 3.0 sur mon asus n75S
équiper d'une nvdia gt555m l'install se deroule sans soucis mais impossible de lancer avec optirun j'ai le meme message que Jackovic
guillaume@guillaume-Ubuntu:~$optirun glxspheres
[ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
[ERROR]Aborting because fallback start is disabled.
je suis sur ubuntu Natty 64 bits
voici les logs
Kern.log
Jan 21 13:38:46 guillaume-Ubuntu kernel: [ 177.315174] bbswitch: enabling discrete graphics
Jan 21 13:38:47 guillaume-Ubuntu kernel: [ 177.902563] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 13:38:47 guillaume-Ubuntu kernel: [ 177.918516] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 13:38:47 guillaume-Ubuntu kernel: [ 177.918543] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100000)
Jan 21 13:38:47 guillaume-Ubuntu kernel: [ 177.918556] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 13:38:47 guillaume-Ubuntu kernel: [ 177.918558] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 13:38:47 guillaume-Ubuntu kernel: [ 177.918562] pci 0000:01:00.0: enabling device (0000 -> 0003)
Jan 21 13:38:47 guillaume-Ubuntu kernel: [ 177.918567] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 21 13:38:47 guillaume-Ubuntu kernel: [ 177.918571] pci 0000:01:00.0: setting latency timer to 64syslog
Jan 21 14:05:03 guillaume-Ubuntu acpid: client 2860[0:1002] has disconnected
Jan 21 14:05:03 guillaume-Ubuntu acpid: client connected from 6299[0:1002]
Jan 21 14:05:03 guillaume-Ubuntu acpid: 1 client rule loaded
Jan 21 14:05:03 guillaume-Ubuntu bumblebeed[1232]: [XORG] (EE) No devices detected.
Jan 21 14:05:03 guillaume-Ubuntu bumblebeed[1232]: X did not start properly
Jan 21 14:05:25 guillaume-Ubuntu acpid: client 6299[0:1002] has disconnected
Jan 21 14:05:25 guillaume-Ubuntu acpid: client connected from 6347[0:1002]
Jan 21 14:05:25 guillaume-Ubuntu acpid: 1 client rule loaded
Jan 21 14:05:25 guillaume-Ubuntu bumblebeed[1232]: [XORG] (EE) No devices detected.
Jan 21 14:05:25 guillaume-Ubuntu bumblebeed[1232]: X did not start properlyEdit
il me dis que les drivers nvdia ne sont pas activé si j'active l'affichage deviens hyper crade et l'ordi rame
j'ai nouveaux qui est utiliser comme drivers graphique actuellement la version 3.0 de bumblebee est elle compatible avec le pilote libre ?
Edit 2
apres avoir instaler les piloe nvdia puis reboot j'ai
[ERROR]Cannot access secondary GPU - error: [XORG] (EE) [drm] failed to open device
[ERROR]Aborting because fallback start is disabled.
et dans pilote suplmentaire pilote nvdia installer mais pas utiliser
nouveaux installer et en cours d'utilisation
nouveaux log
Kern
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 22.804343] atl1c 0000:05:00.0: irq 53 for MSI/MSI-X
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 22.898946] ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 22.932458] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 22.932470] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.GFX0
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 22.932606] bbswitch: detected an Optimus _DSM function
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 22.932613] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 23.038214] nvidia 0000:01:00.0: PCI INT A disabled
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 23.040246] bbswitch: disabling discrete graphics
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 23.040383] bbswitch: Result of Optimus _DSM call: 11000059
Jan 21 14:26:35 guillaume-Ubuntu kernel: [ 23.118356] pci 0000:01:00.0: power state changed by ACPI to D3
Jan 21 14:27:10 guillaume-Ubuntu kernel: [ 57.470417] wlan0: no IPv6 routers present
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 77.550983] bbswitch: enabling discrete graphics
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163810] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163816] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163843] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100003)
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163856] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163858] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163865] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163869] pci 0000:01:00.0: setting latency timer to 64sys
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 77.550983] bbswitch: enabling discrete graphics
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163810] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163816] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163843] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100003)
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163856] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163858] pci 0000:01:00.0: power state changed by ACPI to D0
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163865] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 21 14:27:30 guillaume-Ubuntu kernel: [ 78.163869] pci 0000:01:00.0: setting latency timer to 64
Jan 21 14:27:30 guillaume-Ubuntu acpid: client connected from 2851[0:1002]
Jan 21 14:27:30 guillaume-Ubuntu acpid: 1 client rule loaded
Jan 21 14:27:31 guillaume-Ubuntu ntpdate[2594]: adjust time server 91.189.94.4 offset -0.241859 sec
Jan 21 14:27:31 guillaume-Ubuntu bumblebeed[1254]: [XORG] (EE) [drm] failed to open device
Jan 21 14:27:31 guillaume-Ubuntu bumblebeed[1254]: [XORG] (EE) No devices detected.
Jan 21 14:27:31 guillaume-Ubuntu bumblebeed[1254]: X did not start properlyje tente de desinstaler nouveaux ?
Dernière modification par GP974 (Le 21/01/2012, à 11:40)
Hors ligne