#1426 Le 19/05/2012, à 08:21
- rpj
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
CerdLXDE, effectivement tu lance le conky qui se trouve dans /etc/conky/ il faut que tu vire ce qu’il y a dedans avant de lancer le tiens.
sudo rm -rf /etc/conky/conky.conf
sudo rm -rf /etc/conky/conky_no_x11.confet ensuite tu lance ton conky avec
conky -c /home/TON NOM/.conky/NOM DE TON CONKYEt tu regarde comment on le lance automatiquement au démarrage.
La ligne de commande UNIX devrait être obligatoire dès la maternelle ! :-)
Debian, XFCE, FF, .
Android dev (éternel débutant)
Hors ligne
#1427 Le 19/05/2012, à 14:51
- zn23
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
Voilà le mien tout bete
#if mixerbar does not work add 'snd-mixer-oss' in /etc/modules#
background no
# Use Xft?
use_xft yes
font snap-7
xftfont Ubuntu:pixelsize=9
xftalpha 0.9
text_buffer_size 2048
out_to_console no
update_interval 1
total_run_times 0
draw_shades no
draw_outline no
draw_borders no
#default_outline_color fff
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints below,sticky,skip_taskbar,skip_pager
double_buffer yes
default_color lightgrey
alignment bottom_right
gap_x 5
gap_y -45
no_buffers yes
minimum_size 5 5
maximum_width 150
short_units yes
use_spacer right
default_bar_size 75 2
TEXT
${voffset 50}${color white}${font Ubuntu:style=Bold:pixelsize=58}${time %H:%M}${font}
${voffset -2}${color lightgrey}${font Ubuntu:size=7}${alignc}${uptime}${font}
${color white}${font Ubuntu:style=Bold:pixelsize=10}${alignc}SYSTEM${font}
${color white}${voffset -10}${cpubar cpu7 2,50}${alignr}${cpubar cpu8 2,50}
${color lightgrey}${font Ubuntu:size=8}Hostname ${alignr}${nodename}${font}
${color lightgrey}${font Ubuntu:size=8}Release ${alignr}12.04${font}
Kernel ${alignr}${kernel}
${color lightgrey}${cpubar cpu0 3,150}
${voffset -4}${font Ubuntu:size=7}${color green}${loadavg 1}${alignc -10}${color yellow}${loadavg 2}${alignr}${color red}${loadavg 3}${font}
${color lightgrey}${voffset -5}${cpubar cpu1 3,150}
${color lightgrey}${membar 2,70}${alignr}${swapbar 2,70}
${color white}${font Ubuntu:style=Bold:pixelsize=10}${alignc}FILESYSTEM${font}
${color white}${voffset -10}${cpubar cpu7 2,42}${alignr}${cpubar cpu8 2,42}
${color lightgrey}${font Ubuntu:size=8}Ubuntu ${alignr}${fs_bar 3,90 /}${font}
${color lightgrey}${font Ubuntu:size=8}Home ${alignr}${fs_bar 3,90 /home/zniavre/}${font}
${color lightgrey}${font Ubuntu:size=8}Disk 1 ${alignr}${fs_bar 3,90 /media/Disk1/}${font}
${color lightgrey}${font Ubuntu:size=8}Disk 2 ${alignr}${fs_bar 3,90 /media/Disk2/}${font}
${color white}${font Ubuntu:style=Bold:pixelsize=10}${alignc}NETWORK
${color white}${voffset -10}${cpubar cpu7 2,48}${alignr}${cpubar cpu8 2,48}
${color lightgrey}${font Ubuntu:size=8}Ip network ${alignr} ${color white}${addr wlan0}${font}
${color white}${font Ubuntu:size=8}${wireless_essid wlan0} ${alignr} ${color lightgrey}${font Ubuntu:size=8}${color red}${wireless_link_qual_perc wlan0}${color lightgrey}%
${color lightgrey}${font Ubuntu:size=8}Down ${color white}${downspeed wlan0}${color lightgrey}${alignr}Up ${color white}${upspeed wlan0}${font}
${color lightgrey}${font Ubuntu:size=8}${totaldown wlan0} ${alignr}${totalup wlan0} ${font}
${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}DATE${font}
${color white}${voffset -10}${cpubar cpu7 2,57}${alignr}${cpubar cpu8 2,57}
${color white}${font Ubuntu Mono:size=10}${alignc -6}${execpi 60 VinDSL_Cal_8=`date +%-d`; cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/${color red}&${color grey}/'}${font}
${if_running rhythmbox}${color white}${font Ubuntu:style=Bold:pixelsize=10}${alignc}RhythmBox${font}
${color white}${voffset -10}${cpubar cpu7 2,45}${alignr}${cpubar cpu8 2,45}
${color white}${font Ubuntu:style=Bold:size=14}${alignc}${exec rhythmbox-client --print-playing-format %at}${font}
${color lightgrey}${font Ubuntu:size=11} ${alignc}${exec rhythmbox-client --print-playing-format %aa}${font}
${color white}${font Ubuntu:size=9} ${alignc}${exec rhythmbox-client --no-start --print-playing-format %tt}${font}
${color red}${font Ubuntu:style=Bold:size=8}${alignc} ${exec rhythmbox-client --no-start --print-playing-format "%te"}${font}
${voffset -5}${color lightgrey}${alignc}${mixerbar}$endif
${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}zni-A-vre${font}
${color white}${voffset -10}${cpubar cpu7 2,48}${alignr}${cpubar cpu8 2,48}Dernière modification par zn23 (Le 19/05/2012, à 14:57)
tu peux y mettre tout le fûmier que tu veux , pour un chêne centenaire, faut cent ans ...
Hors ligne
#1428 Le 19/05/2012, à 18:20
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
zn23 -
Ha ! Qu'il est chouette ton conky, juste une question est il possible d'avoir le même résultat des lignes rhythmbox mais pour vlc ?
j'ai essayé en changeant rhythmbox-client en vlc mais ça n'a pas fonctionné... dommage, connaîtrais tu la bonne commande pour avoir vlc, ma médiathèque est en vidéo format youtube, donc exit rhythmbox, clémentine, je n'ai, je crois, que vlc...
J'aimerais beaucoup avoir ce que tu as concocté pour le lecteur de musique.
Si tu me permet, bien sur, d'utiliser ta production de super conkystadore
${color white}${font Ubuntu:style=Bold:size=14}${alignc}${exec rhythmbox-client --print-playing-format %at}${font}
${color lightgrey}${font Ubuntu:size=11} ${alignc}${exec rhythmbox-client --print-playing-format %aa}${font}
${color white}${font Ubuntu:size=9} ${alignc}${exec rhythmbox-client --no-start --print-playing-format %tt}${font}
${color red}${font Ubuntu:style=Bold:size=8}${alignc} ${exec rhythmbox-client --no-start --print-playing-format "%te"}${font}
${voffset -5}${color lightgrey}${alignc}${mixerbar}$endifDernière modification par enebre (Le 19/05/2012, à 18:29)
Hors ligne
#1429 Le 19/05/2012, à 18:34
- superBOB
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
Didier-T a écrit :
excuse moi, mais ton script ne correspond pas à ce qu'il y a sur ta capture d'écran, tu devrais vérifier.
Effectivement j'ai posté le mauvais fichier.
Voici le bon.
# set to yes if you want Conky to be forked in the background
background no
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=9
#xftfont Terminus:size=8
xftfont DejaVu Sans:size=8
# Text alpha when using Xft
xftalpha 1.0
# Print everything to console?
# out_to_console no
# Update interval in seconds
update_interval 3.0
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
#total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window yes
# own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 100 5
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 8
# border margins
border_inner_margin 2
# border width
border_width 1
# Default colors and also border colors
default_color Gray21
default_shade_color black
default_outline_color white
own_window_colour brown
own_window_transparent yes
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 10
gap_y 22
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 3
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer no
#Note: doesn't work in conky 1.2 =(
# Possible variables to be used:
#
# Variable Arguments Description
# addr (interface) IP address for an interface
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# alignr (num) Right-justify text, with space of N
# alignc Align text to centre
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# cpugraph (height),(width) (gradient colour 1) (gradient colour 2)
# CPU usage graph, with optional colours in hex,
# minus the #.
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# downspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Download speed graph, colours defined in
# hex, minus the #.
# exec shell command Executes a shell command and displays
# the output in conky. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execbar shell command Same as exec, except if the first value
# return is a value between 0-100, it
# will use that number for a bar.
# The size for the bar is currently fixed,
# but that may change in the future.
# execgraph shell command Same as execbar, but graphs values
# execi interval, shell command
# Same as exec but with specific interval.
# Interval can't be less than
# update_interval in configuration.
# font font Specify a different font. Only applies
# to one line.
# fs_bar (height), (fs)Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
#
# your local computer.
# if_running (process) if PROCESS is running, display
# everything if_running and the matching $endif
# if_existing (file) if FILE exists, display everything between
# if_existing and the matching $endif
# if_mounted (mountpoint) if MOUNTPOINT is mounted, display everything between
# if_mounted and the matching $endif
# else Text to show if any of the above are not true
# kernel Kernel version
# linkstatus (interface) Get the link status for wireless connections
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
#
# metar_ob_time
# metar_temp
# metar_tempf Temp in F
# metar_windchill
# metar_dew_point There are a bunch of these
# metar_rh and they are self-explanatory
# metar_windspeed
# metar_winddir
# metar_swinddir
# metar_cloud
# metar_u2d_time
#
# ml_upload_counter total session upload in mb
# ml_download_counter total session download in mb
# ml_nshared_files number of shared files
# ml_shared_counter total session shared in mb, buggy
# in some mldonkey versions
# ml_tcp_upload_rate tcp upload rate in kb/s
# ml_tcp_download_rate tcp download rate in kb/s
# ml_udp_upload_rate udp upload rate in kb/s
# ml_udp_download_rate udp download rate in kb/s
# ml_ndownloaded_files number of completed files
# ml_ndownloading_files number of downloading files
#
# mpd_artist Artist in current MPD song
# (must be enabled at compile)
# mpd_album Album in current MPD song
# mpd_bar (height) Bar of mpd's progress
# mpd_bitrate Bitrate of current song
# mpd_status Playing, stopped, et cetera.
# mpd_title Title of current MPD song
# mpd_vol MPD's volume
# mpd_elapsed Song's elapsed time
# mpd_length Song's length
# mpd_percent Percent of song's progress
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# conky displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# offset pixels Move text over by N pixels
# tail logfile, lines (interval)
# Displays last N lines of supplied text
# text file. If interval is not supplied,
# Conky assumes 2x Conky's interval.
# Max of 30 lines.
# Max of 30 lines can be displayed.
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before conky
# has started.
# top type, num This takes arguments in the form:
# top <name> <number>
# Basically, processes are ranked from
# highest to lowest in terms of cpu
# usage, which is what <num> represents.
# The types are: "name", "pid", "cpu", and
# "mem".
# There can be a max of 10 processes listed.
# top_mem type, num Same as top, except sorted by mem usage
# instead of cpu
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# upspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
# Upload speed graph, colours defined in
# hex, minus the #.
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
# stuff after 'TEXT' will be formatted on screen
TEXT
${color #000000}SYSTEM ${hr 2}$color
$nodename $sysname
${color #000000}${execi 86400 cat /etc/lsb-release|grep ID|cut -d= -f2} ${color #000000}${execi 86400 cat /etc/lsb-release|grep REL|cut -d= -f2}${color #000000} "${color #000000}${execi 86400 cat /etc/lsb-release|grep NAME|cut -d= -f2}${color #000000}"
Kernel: $kernel on $machine
${color #000000}Uptime: $color$uptime
# ${color #000000}Battery: $color${battery}
${color #000000}CPU ${hr 2}$color
${color #000000}Frequency: $color${freq}MHz ${color #000000}Temp: $color${acpitemp}°C
${color #000000}Load: $color${loadavg}
${cpubar 6,200}$color
# NAME PID CPU% MEM%
# ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
# ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
# ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
# ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color #000000}MEMORY ${hr 2}$color
RAM: $memperc% $mem/$memmax
${membar 6,200}$color
Swap: $swapperc% $swap/$swapmax
${swapbar 6,200}$color
${color #000000}DISKS ${hr 2}$color
Root: ${fs_free /} / ${fs_size /} -- ${fs_free_perc /}% free
${fs_bar 6,200 /}$color
Home: ${fs_free /home} / ${fs_size /home} -- ${fs_free_perc /home}% free
${fs_bar 6,200 /home}$color
${color #000000}LAN (${addr eth0}) ${hr 2}$color
Down: ${totaldown eth0} ${alignr}Up: ${totalup eth0}
${downspeedgraph eth0 25,100 000000 ff0000} ${alignr}${upspeedgraph eth0 25,100 000000 00ff00}$color
${color #000000}Wi-Fi (${addr wlan0}) ${hr 2}$color
${color #000000}Connected to $color${wireless_essid wlan0}
${color #000000}Speed $color${wireless_bitrate wlan0} ${color #000000}Quality: $color${wireless_link_qual wlan0}%
Down: ${totaldown wlan0} ${alignr}Up: ${totalup wlan0}
${downspeedgraph wlan0 25,100 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,100 000000 00ff00}$color
${color #000000}WAN (${addr ppp0}) ${hr 2}$color
Down: ${totaldown ppp0} ${alignr}Up: ${totalup ppp0}
${downspeedgraph ppp0 25,100 000000 ff0000} ${alignr}${upspeedgraph ppp0 25,100 000000 00ff00}$color
Hors ligne
#1430 Le 19/05/2012, à 19:47
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
salut les conkystadores,
C'est avec l'excellent travail de zn23, que je suis arrivé à faire le conky de mes rêves, que j'ai nommé conky-tout-bete cfr zn23 post#1427,sauf le problème d'avoir vlc, à la place ou en plus de rhythmbox,
j'aimerais une petite aide pour le coup... siouplait
L'image 
#if mixerbar does not work add 'snd-mixer-oss' in /etc/modules#
#background no
# Use Xft?
use_xft yes
font snap-7
xftfont Ubuntu:pixelsize=13
xftalpha 0.9
text_buffer_size 2048
background yes
out_to_console no
update_interval 10
total_run_times 0
draw_shades no
draw_outline no
draw_borders no
#default_outline_color fff
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints below,sticky,skip_taskbar,skip_pager
double_buffer yes
default_color lightgrey
alignment bottom_left
gap_x 60
gap_y 255
no_buffers yes
minimum_size 5 5
maximum_width 170
short_units yes
use_spacer right
default_bar_size 100 4
TEXT
${color EAEAEA}${font GE Inspira:pixelsize=55}${alignc}${time %H:%M}${font GE Inspira:pixelsize=24}
${alignc}${voffset 10}${alignc}${color EAEAEA}${time %A}
${alignc}${color D12122}${time %d}${color EAEAEA} ${time %B}
#${font Ubuntu:pixelsize=10}${alignr}${color D12122}HD $color${fs_used /} / ${fs_size /} ${color D12122}RAM $color$mem / $memmax ${color D12122}CPU $color${cpu cpu0}%
#${voffset 50}${color white}${font Ubuntu:style=Bold:pixelsize=58}${time %H:%M}${font}
${color white}${font Ubuntu:style=Bold:pixelsize=12}${alignc}UpTime Chrono${font}
${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30}
${voffset -2}${color lightgrey}${font Ubuntu:size=12}${alignc}${uptime}${font}
${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}SYSTEM INFO${font}
${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30}
${color lightgrey}${font Ubuntu:size=11}Hostname ${alignr}${nodename}${font}
${color lightgrey}${font Ubuntu:size=11}Release ${alignr}12.04${font}
Kernel ${alignr}${kernel}
${color lightgrey}${font Ubuntu:size=9}cpu 1 & 2 ${alignr}bar${font}
${color lightgrey}${cpubar cpu0 3,170}
${voffset -4}${font Ubuntu:size=10}${color green}${loadavg 1}${alignc -10}${color yellow}${loadavg 2}${alignr}${color red}${loadavg 3}${font}
${color lightgrey}${voffset -5}${cpubar cpu1 4,170}
${color lightgrey}${font Ubuntu:size=9}memory ${alignr}swap${font}
${color lightgrey}${membar 4,80}${alignr}${swapbar 4,80}
${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}FILESYSTEM SIZE${font}
${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30}
${color lightgrey}${font Ubuntu:size=10}Voyager & home ${alignr}${fs_bar 3,60 /}${font}
#${color lightgrey}${font Ubuntu:size=8}Home ${alignr}${fs_bar 3,90 /home/zniavre/}${font}
#${color lightgrey}${font Ubuntu:size=8}Disk 1 ${alignr}${fs_bar 3,90 /media/Disk1/}${font}
#${color lightgrey}${font Ubuntu:size=8}Disk 2 ${alignr}${fs_bar 3,90 /media/Disk2/}${font}
${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}NETWORK DATA
${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30}
${color lightgrey}${font Ubuntu:size=8}Ip network etho ${alignr} ${color white}${addr eth0}${font}
#${color lightgrey}${font Ubuntu:size=8}Ip network wlan ${alignr} ${color white}${addr wlan0}${font}
#${color white}${font Ubuntu:size=10}${wireless_essid wlan0} ${alignr} ${color lightgrey}${font Ubuntu:size=8}${color red}${wireless_link_qual_perc wlan0}${color lightgrey}%
${color lightgrey}${font Ubuntu:size=9}Down ${color white}${downspeed eth0}${color lightgrey}${alignr}Up ${color white}${upspeed eth0}${font}
${color lightgrey}${font Ubuntu:size=9}${totaldown eth0} ${alignr}${totalup eth0} ${font}
${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}CALENDRIER 2012${font}
${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30}
${color white}${font Ubuntu Mono:size=10}${alignc -6}${execpi 60 VinDSL_Cal_8b=$(( $(date +%-d) - 1 ));VinDSL_Cal_8=$(date +%-d); cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/&${color grey}/' -e 's/\<'"$VinDSL_Cal_8b"'\>/&${color red}/'}${font}
${if_running rhythmbox}${color white}${font Ubuntu:style=Bold:pixelsize=10}${alignc}Rhythmbox${font}
${color white}${voffset -10}${cpubar cpu7 2,45}${alignr}${cpubar cpu8 2,45}
${color white}${font Ubuntu:style=Bold:size=14}${alignc}${exec rhythmbox-client --print-playing-format %at}${font}
${color lightgrey}${font Ubuntu:size=11} ${alignc}${exec rhythmbox-client --print-playing-format %aa}${font}
${color white}${font Ubuntu:size=9} ${alignc}${exec rhythmbox-client --no-start --print-playing-format %tt}${font}
${color red}${font Ubuntu:style=Bold:size=8}${alignc} ${exec rhythmbox-client --no-start --print-playing-format "%te"}${font}
${voffset -5}${color lightgrey}${alignc}${mixerbar}$endif
${color white}${font Ubuntu:style=Bold:pixelsize=13}${alignc}enebre${font}
${color white}${voffset -10}${cpubar cpu7 2,48}${alignr}${cpubar cpu8 2,48}Ici la partie du code qui devrait être modifiée pour permettre l'affichage des infos du média en cours de lecture par VLC.
${if_running rhythmbox}${color white}${font Ubuntu:style=Bold:pixelsize=10}${alignc}Rhythmbox${font}
${color white}${voffset -10}${cpubar cpu7 2,45}${alignr}${cpubar cpu8 2,45}
${color white}${font Ubuntu:style=Bold:size=14}${alignc}${exec rhythmbox-client --print-playing-format %at}${font}
${color lightgrey}${font Ubuntu:size=11} ${alignc}${exec rhythmbox-client --print-playing-format %aa}${font}
${color white}${font Ubuntu:size=9} ${alignc}${exec rhythmbox-client --no-start --print-playing-format %tt}${font}Dernière modification par enebre (Le 20/05/2012, à 09:12)
Hors ligne
#1431 Le 19/05/2012, à 21:22
- Didier-T
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
superBOB a écrit :
Didier-T a écrit :excuse moi, mais ton script ne correspond pas à ce qu'il y a sur ta capture d'écran, tu devrais vérifier.
Effectivement j'ai posté le mauvais fichier.
Voici le bon.
# set to yes if you want Conky to be forked in the background background no # Use Xft? use_xft yes # Xft font when Xft is enabled #xftfont Bitstream Vera Sans Mono:size=9 #xftfont Terminus:size=8 xftfont DejaVu Sans:size=8 # Text alpha when using Xft xftalpha 1.0 # Print everything to console? # out_to_console no # Update interval in seconds update_interval 3.0 # This is the number of times Conky will update before quitting. # Set to zero to run forever. #total_run_times 0 # Create own window instead of using desktop (required in nautilus) own_window yes # own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # Minimum size of text area minimum_size 100 5 # Draw shades? draw_shades no # Draw outlines? draw_outline no # Draw borders around text draw_borders no # Stippled borders? stippled_borders 8 # border margins border_inner_margin 2 # border width border_width 1 # Default colors and also border colors default_color Gray21 default_shade_color black default_outline_color white own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text # same thing as passing -x at command line gap_x 10 gap_y 22 # Subtract file system buffers from used memory? no_buffers yes # set to yes if you want all text to be in uppercase uppercase no # number of cpu samples to average # set to 1 to disable averaging cpu_avg_samples 3 # number of net samples to average # set to 1 to disable averaging net_avg_samples 2 # Force UTF8? note that UTF8 support required XFT override_utf8_locale yes # Add spaces to keep things from moving about? This only affects certain objects. use_spacer no #Note: doesn't work in conky 1.2 =( # Possible variables to be used: # # Variable Arguments Description # addr (interface) IP address for an interface # acpiacadapter ACPI ac adapter state. # acpifan ACPI fan state # acpitemp ACPI temperature. # adt746xcpu CPU temperature from therm_adt746x # adt746xfan Fan speed from therm_adt746x # alignr (num) Right-justify text, with space of N # alignc Align text to centre # battery (num) Remaining capasity in ACPI or APM # battery. ACPI battery number can be # given as argument (default is BAT0). # buffers Amount of memory buffered # cached Amount of memory cached # color (color) Change drawing color to color # cpu CPU usage in percents # cpubar (height) Bar that shows CPU usage, height is # bar's height in pixels # cpugraph (height),(width) (gradient colour 1) (gradient colour 2) # CPU usage graph, with optional colours in hex, # minus the #. # downspeed net Download speed in kilobytes # downspeedf net Download speed in kilobytes with one # decimal # downspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2) # Download speed graph, colours defined in # hex, minus the #. # exec shell command Executes a shell command and displays # the output in conky. warning: this # takes a lot more resources than other # variables. I'd recommend coding wanted # behaviour in C and posting a patch :-). # execbar shell command Same as exec, except if the first value # return is a value between 0-100, it # will use that number for a bar. # The size for the bar is currently fixed, # but that may change in the future. # execgraph shell command Same as execbar, but graphs values # execi interval, shell command # Same as exec but with specific interval. # Interval can't be less than # update_interval in configuration. # font font Specify a different font. Only applies # to one line. # fs_bar (height), (fs)Bar that shows how much space is used on # a file system. height is the height in # pixels. fs is any file on that file # system. # fs_free (fs) Free space on a file system available # for users. # fs_free_perc (fs) Free percentage of space on a file # system available for users. # fs_size (fs) File system size # fs_used (fs) File system used space # hr (height) Horizontal line, height is the height in # pixels # # your local computer. # if_running (process) if PROCESS is running, display # everything if_running and the matching $endif # if_existing (file) if FILE exists, display everything between # if_existing and the matching $endif # if_mounted (mountpoint) if MOUNTPOINT is mounted, display everything between # if_mounted and the matching $endif # else Text to show if any of the above are not true # kernel Kernel version # linkstatus (interface) Get the link status for wireless connections # loadavg (1), (2), (3) System load average, 1 is for past 1 # minute, 2 for past 5 minutes and 3 for # past 15 minutes. # machine Machine, i686 for example # mails Mail count in mail spool. You can use # program like fetchmail to get mails from # some server using your favourite # protocol. See also new_mails. # mem Amount of memory in use # membar (height) Bar that shows amount of memory in use # memmax Total amount of memory # memperc Percentage of memory in use # # metar_ob_time # metar_temp # metar_tempf Temp in F # metar_windchill # metar_dew_point There are a bunch of these # metar_rh and they are self-explanatory # metar_windspeed # metar_winddir # metar_swinddir # metar_cloud # metar_u2d_time # # ml_upload_counter total session upload in mb # ml_download_counter total session download in mb # ml_nshared_files number of shared files # ml_shared_counter total session shared in mb, buggy # in some mldonkey versions # ml_tcp_upload_rate tcp upload rate in kb/s # ml_tcp_download_rate tcp download rate in kb/s # ml_udp_upload_rate udp upload rate in kb/s # ml_udp_download_rate udp download rate in kb/s # ml_ndownloaded_files number of completed files # ml_ndownloading_files number of downloading files # # mpd_artist Artist in current MPD song # (must be enabled at compile) # mpd_album Album in current MPD song # mpd_bar (height) Bar of mpd's progress # mpd_bitrate Bitrate of current song # mpd_status Playing, stopped, et cetera. # mpd_title Title of current MPD song # mpd_vol MPD's volume # mpd_elapsed Song's elapsed time # mpd_length Song's length # mpd_percent Percent of song's progress # new_mails Unread mail count in mail spool. # nodename Hostname # outlinecolor (color) Change outline color # pre_exec shell command Executes a shell command one time before # conky displays anything and puts output # as text. # processes Total processes (sleeping and running) # running_processes Running processes (not sleeping), # requires Linux 2.6 # shadecolor (color) Change shading color # stippled_hr (space), Stippled (dashed) horizontal line # (height) # swapbar (height) Bar that shows amount of swap in use # swap Amount of swap in use # swapmax Total amount of swap # swapperc Percentage of swap in use # sysname System name, Linux for example # offset pixels Move text over by N pixels # tail logfile, lines (interval) # Displays last N lines of supplied text # text file. If interval is not supplied, # Conky assumes 2x Conky's interval. # Max of 30 lines. # Max of 30 lines can be displayed. # time (format) Local time, see man strftime to get more # information about format # totaldown net Total download, overflows at 4 GB on # Linux with 32-bit arch and there doesn't # seem to be a way to know how many times # it has already done that before conky # has started. # top type, num This takes arguments in the form: # top <name> <number> # Basically, processes are ranked from # highest to lowest in terms of cpu # usage, which is what <num> represents. # The types are: "name", "pid", "cpu", and # "mem". # There can be a max of 10 processes listed. # top_mem type, num Same as top, except sorted by mem usage # instead of cpu # totalup net Total upload, this one too, may overflow # updates Number of updates (for debugging) # upspeed net Upload speed in kilobytes # upspeedf net Upload speed in kilobytes with one # decimal # upspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2) # Upload speed graph, colours defined in # hex, minus the #. # uptime Uptime # uptime_short Uptime in a shorter format # # seti_prog Seti@home current progress # seti_progbar (height) Seti@home current progress bar # seti_credit Seti@hoome total user credit # variable is given either in format $variable or in ${variable}. Latter # allows characters right after the variable and must be used in network # stuff because of an argument # stuff after 'TEXT' will be formatted on screen TEXT ${color #000000}SYSTEM ${hr 2}$color $nodename $sysname ${color #000000}${execi 86400 cat /etc/lsb-release|grep ID|cut -d= -f2} ${color #000000}${execi 86400 cat /etc/lsb-release|grep REL|cut -d= -f2}${color #000000} "${color #000000}${execi 86400 cat /etc/lsb-release|grep NAME|cut -d= -f2}${color #000000}" Kernel: $kernel on $machine ${color #000000}Uptime: $color$uptime # ${color #000000}Battery: $color${battery} ${color #000000}CPU ${hr 2}$color ${color #000000}Frequency: $color${freq}MHz ${color #000000}Temp: $color${acpitemp}°C ${color #000000}Load: $color${loadavg} ${cpubar 6,200}$color # NAME PID CPU% MEM% # ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} # ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} # ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} # ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4} ${color #000000}MEMORY ${hr 2}$color RAM: $memperc% $mem/$memmax ${membar 6,200}$color Swap: $swapperc% $swap/$swapmax ${swapbar 6,200}$color ${color #000000}DISKS ${hr 2}$color Root: ${fs_free /} / ${fs_size /} -- ${fs_free_perc /}% free ${fs_bar 6,200 /}$color Home: ${fs_free /home} / ${fs_size /home} -- ${fs_free_perc /home}% free ${fs_bar 6,200 /home}$color ${color #000000}LAN (${addr eth0}) ${hr 2}$color Down: ${totaldown eth0} ${alignr}Up: ${totalup eth0} ${downspeedgraph eth0 25,100 000000 ff0000} ${alignr}${upspeedgraph eth0 25,100 000000 00ff00}$color ${color #000000}Wi-Fi (${addr wlan0}) ${hr 2}$color ${color #000000}Connected to $color${wireless_essid wlan0} ${color #000000}Speed $color${wireless_bitrate wlan0} ${color #000000}Quality: $color${wireless_link_qual wlan0}% Down: ${totaldown wlan0} ${alignr}Up: ${totalup wlan0} ${downspeedgraph wlan0 25,100 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,100 000000 00ff00}$color ${color #000000}WAN (${addr ppp0}) ${hr 2}$color Down: ${totaldown ppp0} ${alignr}Up: ${totalup ppp0} ${downspeedgraph ppp0 25,100 000000 ff0000} ${alignr}${upspeedgraph ppp0 25,100 000000 00ff00}$colorhttp://img850.imageshack.us/img850/3331/capturedu20120517224132.th.png
Bonsoir,
ton soucis vient de cette ligne ci
${color #000000}${execi 86400 cat /etc/lsb-release|grep ID|cut -d= -f2} ${color #000000}${execi 86400 cat /etc/lsb-release|grep REL|cut -d= -f2}${color #000000} "${color #000000}${execi 86400 cat /etc/lsb-release|grep NAME|cut -d= -f2}${color #000000}"remplace tes execi 86400 par des pre_exec
en fait il y a un petit bug avec conky depuis Ubuntu 12.04 execi attent la fin du compte à rebour pour executer la commande
Hors ligne
#1432 Le 19/05/2012, à 21:26
- Didier-T
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
enebre a écrit :
salut les conkystadores,
C'est avec l'excellent travail de zn23, que je suis arrivé à faire le conky de mes rêves, que j'ai nommé conky-tout-bete cfr zn23 post#1427,sauf le problème d'avoir vlc, à la place ou en plus de rhythmbox,
j'aimerais une petite aide pour le coup... siouplait
L'image http://www.23hq.com/enebre/photo/7874341/original et le conky de zn23 modifié#if mixerbar does not work add 'snd-mixer-oss' in /etc/modules# #background no # Use Xft? use_xft yes font snap-7 xftfont Ubuntu:pixelsize=13 xftalpha 0.9 text_buffer_size 2048 background yes out_to_console no update_interval 10 total_run_times 0 draw_shades no draw_outline no draw_borders no #default_outline_color fff own_window yes own_window_type override own_window_transparent yes own_window_hints below,sticky,skip_taskbar,skip_pager double_buffer yes default_color lightgrey alignment bottom_left gap_x 60 gap_y 255 no_buffers yes minimum_size 5 5 maximum_width 170 short_units yes use_spacer right default_bar_size 100 4 TEXT ${color EAEAEA}${font GE Inspira:pixelsize=55}${alignc}${time %H:%M}${font GE Inspira:pixelsize=24} ${alignc}${voffset 10}${alignc}${color EAEAEA}${time %A} ${alignc}${color D12122}${time %d}${color EAEAEA} ${time %B} #${font Ubuntu:pixelsize=10}${alignr}${color D12122}HD $color${fs_used /} / ${fs_size /} ${color D12122}RAM $color$mem / $memmax ${color D12122}CPU $color${cpu cpu0}% #${voffset 50}${color white}${font Ubuntu:style=Bold:pixelsize=58}${time %H:%M}${font} ${color white}${font Ubuntu:style=Bold:pixelsize=12}${alignc}UpTime Chrono${font} ${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30} ${voffset -2}${color lightgrey}${font Ubuntu:size=12}${alignc}${uptime}${font} ${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}SYSTEM INFO${font} ${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30} ${color lightgrey}${font Ubuntu:size=11}Hostname ${alignr}${nodename}${font} ${color lightgrey}${font Ubuntu:size=11}Release ${alignr}12.04${font} Kernel ${alignr}${kernel} ${color lightgrey}${font Ubuntu:size=9}cpu 1 & 2 ${alignr}bar${font} ${color lightgrey}${cpubar cpu0 3,170} ${voffset -4}${font Ubuntu:size=10}${color green}${loadavg 1}${alignc -10}${color yellow}${loadavg 2}${alignr}${color red}${loadavg 3}${font} ${color lightgrey}${voffset -5}${cpubar cpu1 4,170} ${color lightgrey}${font Ubuntu:size=9}memory ${alignr}swap${font} ${color lightgrey}${membar 4,80}${alignr}${swapbar 4,80} ${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}FILESYSTEM SIZE${font} ${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30} ${color lightgrey}${font Ubuntu:size=10}Voyager & home ${alignr}${fs_bar 3,60 /}${font} #${color lightgrey}${font Ubuntu:size=8}Home ${alignr}${fs_bar 3,90 /home/zniavre/}${font} #${color lightgrey}${font Ubuntu:size=8}Disk 1 ${alignr}${fs_bar 3,90 /media/Disk1/}${font} #${color lightgrey}${font Ubuntu:size=8}Disk 2 ${alignr}${fs_bar 3,90 /media/Disk2/}${font} ${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}NETWORK DATA ${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30} ${color lightgrey}${font Ubuntu:size=8}Ip network etho ${alignr} ${color white}${addr eth0}${font} #${color lightgrey}${font Ubuntu:size=8}Ip network wlan ${alignr} ${color white}${addr wlan0}${font} #${color white}${font Ubuntu:size=10}${wireless_essid wlan0} ${alignr} ${color lightgrey}${font Ubuntu:size=8}${color red}${wireless_link_qual_perc wlan0}${color lightgrey}% ${color lightgrey}${font Ubuntu:size=9}Down ${color white}${downspeed eth0}${color lightgrey}${alignr}Up ${color white}${upspeed eth0}${font} ${color lightgrey}${font Ubuntu:size=9}${totaldown eth0} ${alignr}${totalup eth0} ${font} ${color white}${font Ubuntu:style=Bold:pixelsize=11}${alignc}CALENDRIER 2012${font} ${color white}${voffset -10}${cpubar cpu7 2,30}${alignr}${cpubar cpu8 2,30} ${color white}${font Ubuntu Mono:size=10}${alignc -6}${execpi 60 VinDSL_Cal_8=`date +%-d`; cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/${color red}&${color grey}/'}${font} ${if_running rhythmbox}${color white}${font Ubuntu:style=Bold:pixelsize=10}${alignc}Rhythmbox${font} ${color white}${voffset -10}${cpubar cpu7 2,45}${alignr}${cpubar cpu8 2,45} ${color white}${font Ubuntu:style=Bold:size=14}${alignc}${exec rhythmbox-client --print-playing-format %at}${font} ${color lightgrey}${font Ubuntu:size=11} ${alignc}${exec rhythmbox-client --print-playing-format %aa}${font} ${color white}${font Ubuntu:size=9} ${alignc}${exec rhythmbox-client --no-start --print-playing-format %tt}${font} ${color red}${font Ubuntu:style=Bold:size=8}${alignc} ${exec rhythmbox-client --no-start --print-playing-format "%te"}${font} ${voffset -5}${color lightgrey}${alignc}${mixerbar}$endif ${color white}${font Ubuntu:style=Bold:pixelsize=13}${alignc}enebre${font} ${color white}${voffset -10}${cpubar cpu7 2,48}${alignr}${cpubar cpu8 2,48}Ici la partie du code qui devrait être modifiée pour permettre l'affichage des infos du média en cours de lecture par VLC.
${if_running rhythmbox}${color white}${font Ubuntu:style=Bold:pixelsize=10}${alignc}Rhythmbox${font} ${color white}${voffset -10}${cpubar cpu7 2,45}${alignr}${cpubar cpu8 2,45} ${color white}${font Ubuntu:style=Bold:size=14}${alignc}${exec rhythmbox-client --print-playing-format %at}${font} ${color lightgrey}${font Ubuntu:size=11} ${alignc}${exec rhythmbox-client --print-playing-format %aa}${font} ${color white}${font Ubuntu:size=9} ${alignc}${exec rhythmbox-client --no-start --print-playing-format %tt}${font}
Bonsoir(Re),
Tu devrais regarder ce script ci, je suis certain qu'il en existe d'autres avec plus d'informations disponibles.
Hors ligne
#1433 Le 19/05/2012, à 21:40
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
J'ai bien essayé mais désolé, je ne peux rien faire avec ces lignes, ça dépasse mes compétences.
Je suis allé sur le web chercher un peu et pour l'instant je n'ai pas encore trouvé pointure à mon conky.
Dernière modification par enebre (Le 19/05/2012, à 22:08)
Hors ligne
#1434 Le 20/05/2012, à 08:00
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
Bonjour Didier
voici la capture originalcomme tu peux le constater en bas ce n'est plus correctement aligné, j'ai bien vérifié si j'avais changé quelque chose depuis la précédente capture, mais aucune différence, c'est le djin qui pendant la nuit est venu faire des bêtises...
Que représente la ligne des valeurs loadvag en couleur vert-blanc-rouge
${voffset -4}${font Ubuntu:size=10}${color green}${loadavg 1}${alignc -10}${color yellow}${loadavg 2}${alignr}${color red}${loadavg 3}${font}
située dans la partie systeme info entre les barres des cpu ?
Didier-T a écrit :
Ton soucis semble venir du calendrier, il faudrait continuer cette discutions dans le fil consacré à conky.
P.S.: l'utilisation de script toutes les secondes est nuisible à ton utilisation de processeur (regarde ton taux d'utilisation)
Que dois-je chercher comme type d'erreur
Dernière modification par enebre (Le 20/05/2012, à 08:06)
Hors ligne
#1435 Le 20/05/2012, à 08:19
- Didier-T
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
enebre a écrit :
Bonjour Didier
voici la capture originalcomme tu peux le constater en bas ce n'est plus correctement aligné, j'ai bien vérifié si j'avais changé quelque chose depuis la précédente capture, mais aucune différence, c'est le djin qui pendant la nuit est venu faire des bêtises...
http://www.23hq.com/enebre/photo/7874848/original
Que représente la ligne des valeurs loadvag en couleur vert-blanc-rouge${voffset -4}${font Ubuntu:size=10}${color green}${loadavg 1}${alignc -10}${color yellow}${loadavg 2}${alignr}${color red}${loadavg 3}${font}
située dans la partie systeme info entre les barres des cpu ?
Didier-T a écrit :Ton soucis semble venir du calendrier, il faudrait continuer cette discutions dans le fil consacré à conky.
P.S.: l'utilisation de script toutes les secondes est nuisible à ton utilisation de processeur (regarde ton taux d'utilisation)
Que dois-je chercher comme type d'erreur
aller ont vas tenter un truc pour voir dans ton conky tu vas modifier la commande suivante
VinDSL_Cal_8=`date +%-d`; cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/${color red}&${color grey}/'en
VinDSL_Cal_8=$(( $(date +%-d) - 7 )); cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/${color red}&${color grey}/'si je ne me trompe pas sa devrais deplacer le soucis une ligne plus haut
et avec ceci
VinDSL_Cal_8=$(( $(date +%-d) - 1 )); cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/${color red}&${color grey}/'tous devrais retrouver sa place, mais avec un jour de retard.
tu fais des petites captures, pour montrer le résultat (la flemme de refaire un conky), sa servira certainement a d'autre plus tard
Hors ligne
#1436 Le 20/05/2012, à 08:29
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
Didier-T a écrit :
aller ont vas tenter un truc pour voir dans ton conky tu vas modifier la commande suivante
VinDSL_Cal_8=`date +%-d`; cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/${color red}&${color grey}/'en
VinDSL_Cal_8=$(( $(date +%-d) - 1 )); cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/${color red}&${color grey}/'
Résolu 
Dernière modification par enebre (Le 20/05/2012, à 08:45)
Hors ligne
#1437 Le 20/05/2012, à 08:31
- Didier-T
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
enebre a écrit :
Didier-T a écrit :aller ont vas tenter un truc pour voir dans ton conky tu vas modifier la commande suivante
VinDSL_Cal_8=$(( $(date +%-d) - 1 )); cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/${color red}&${color grey}/'Résolu :-)
non, nous ne somme pas le 19 mais le 20, le soucis est isolé, pas résolu.
mais sa vas venir, il faut juste trouver comment contourner le bug d'affichage de conky
Hors ligne
#1438 Le 20/05/2012, à 08:47
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
En effet 
Étrange ce décalage de 24h
Dernière modification par enebre (Le 20/05/2012, à 08:55)
Hors ligne
#1439 Le 20/05/2012, à 08:59
- Didier-T
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
enebre a écrit :
En effet
Étrange ce décalage de 24h
essaye ceci
VinDSL_Cal_8b=$(( $(date +%-d) - 1 ));VinDSL_Cal_8=$(date +%-d); cal -h | sed -e '1d' -e 's/\<'"$VinDSL_Cal_8"'\>/&${color grey}/' -e 's/\<'"$VinDSL_Cal_8b"'\>/&${color red}/'c'est pas très beau, mais sa pourrais faire l’affaire.
Hors ligne
#1440 Le 20/05/2012, à 09:08
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
Ce coup-ci tu as résolu le problème, je crois que tu fais de moi un adepte de conky, je vais voir pour étudier le sujet en reprenant depuis le premier post du forum, peut être que je pourrais apprendre à résoudre quelques petites situations, on n' est jamais trop nombreux.
Dernière modification par enebre (Le 20/05/2012, à 09:09)
Hors ligne
#1441 Le 20/05/2012, à 09:11
- Didier-T
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
enebre a écrit :
Ce coup-ci tu as résolu le problème, je crois que tu fais de moi un adepte de conky, je vais voir pour étudier le sujet en reprenant depuis le premier post du forum, peut être que je pourrais apprendre à résoudre quelques petites situations, on n' est jamais trop nombreux.
http://i1070.photobucket.com/albums/u49 … 100529.png
Et bien voila le génie est retourné dans sa bouteille. 
Hors ligne
#1442 Le 20/05/2012, à 09:49
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
Oui, merci Didier.
Hors ligne
#1443 Le 20/05/2012, à 10:05
- zn23
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
merci à vous deux d'avoir résolu le calendrier car ce matin à ma grande surprise je l'ai vu bugger.
tu peux y mettre tout le fûmier que tu veux , pour un chêne centenaire, faut cent ans ...
Hors ligne
#1444 Le 20/05/2012, à 11:23
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
zn23 - merci à toi de m'avoir ouvert la porte des conkys.
Hors ligne
#1445 Le 20/05/2012, à 12:04
- zn23
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
enebre: les trois valeurs colorées sont le load average :
techniquement je crois que c'est la charge processeur, je sais pas trop exactement, mais ca permet ,sur mon vieil ordi , de verifier qu'il ne ralentisse de trop.
j'ai vu sur ton conkyshot que la derniere barre concernant la partie de rhythmbox n'affiche rien ,soit tu l'enleve ,soit tu lance le module snd-mixer-oss comme indiqué sur la premiere ligne de mon conkyrc
tu peux y mettre tout le fûmier que tu veux , pour un chêne centenaire, faut cent ans ...
Hors ligne
#1446 Le 20/05/2012, à 12:35
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
zn23 - J'ai difficile à comprendre les valeurs qui s'affichent, je l'enlèverai si je ne trouve pas la lumière à ce sujet.
Je voudrais intégrer clémentine sous rhythmbox, mais j'ai un soucis avec l'affichage des vignettes , j'ai pour l'instant l'image par défaut d'un cd vide, "image /tmp/cover" ne doit pas être le bon endroit, dois je changer l'adresse ?
Pour la position de la vignette que je l'aimerais en bottom au lieu de : ${image /tmp/cover -p 50, 640 -s 75x75 -f 6 } (résolu pour la position)
j'ai placé le modules en etc/modules, la ligne est maintenant pleine mais ne change pas, je l'ai donc supprimée de mon conky.
Dernière modification par enebre (Le 20/05/2012, à 12:49)
Hors ligne
#1447 Le 20/05/2012, à 12:37
- superBOB
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
Didier-T a écrit :
Bonsoir,
ton soucis vient de cette ligne ci${color #000000}${execi 86400 cat /etc/lsb-release|grep ID|cut -d= -f2} ${color #000000}${execi 86400 cat /etc/lsb-release|grep REL|cut -d= -f2}${color #000000} "${color #000000}${execi 86400 cat /etc/lsb-release|grep NAME|cut -d= -f2}${color #000000}"remplace tes execi 86400 par des pre_exec
en fait il y a un petit bug avec conky depuis Ubuntu 12.04 execi attent la fin du compte à rebour pour executer la commande
Ca marche!
Mille mercis.
Hors ligne
#1448 Le 20/05/2012, à 13:46
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
Comment faire pour avoir les jaquettes des albums en lecture par Clémentine dans ce petit conky :
${image /tmp/cover -p 48, 680 -s 75x75 -f 6 }
${execi 10 conkyClementine -d CA > /dev/null}
${color3}Title: ${color1}${exec conkyClementine --datatype=TI --maxlength=32}
${color3}Artist: ${color1}${exec conkyClementine --datatype=AR --maxlength=32}
${color3}Album: ${color1}${exec conkyClementine --datatype=AL --maxlength=32}
${color3}Piste: ${color1}${exec conkyClementine --datatype=TN --maxlength=32} ${color3}Time: ${color1}${exec conkyClementine --datatype=PT --maxlength=32} / ${exec conkyClementine --datatype=LE --maxlength=32} ${color3}$endif
#${execibar 2 conkyClementine --datatype=PP}
#$else${color #696969}${alignc}${font sans:size=6:bold}No Activity${font}Dernière modification par enebre (Le 20/05/2012, à 13:48)
Hors ligne
#1449 Le 20/05/2012, à 15:14
- enebre
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
J'ai trouvé une partie de la solution, mais je ne sais pas comment l'intégrer au conkyrc, la ligne de commande lancée dans un terminal offre le résultat tant espéré, comment faire pour lancer cette ligne avec la condition if clementine running par exemple, cela dans la partie de code postée ici dessus :
ls -f1 /tmp | grep clementine-artdans la seconde qui suit l'image apparaît.
Dernière modification par enebre (Le 20/05/2012, à 15:15)
Hors ligne
#1450 Le 20/05/2012, à 15:40
- Didier-T
Re : (4) Conky : Postez vos conkyrc ou certaines parties intéressantes
enebre a écrit :
J'ai trouvé une partie de la solution, mais je ne sais pas comment l'intégrer au conkyrc, la ligne de commande lancée dans un terminal offre le résultat tant espéré, comment faire pour lancer cette ligne avec la condition if clementine running par exemple, cela dans la partie de code postée ici dessus :
ls -f1 /tmp | grep clementine-artdans la seconde qui suit l'image apparaît.
Si tu veut te creusé un peut le tête va voir de ce coté ci
~/.conky/conky2/conkyClementine1
il s'agit du conky clementine wv inclus dans Voyager, il y a tous ce que tu cherche à l’intérieur.
Mais aussi une forte sollicitation du processeur.
Enfin a toi de juger.
Si un jour je trouve une solution pour employer DBus en lua je vous ferais un petit script sympa qui consommera presque pas de ressource, mais pour le moment je ne trouve pas !
Hors ligne