Messages de elnk

elnk · Détection 2nd écran, pilote nvidia

Bonjour à tous,
J'ai vu qu'il y avait déjà eu quelques postes et des solutions proposé ce sujet, mais je ne parviens pas à trouver de solutions :s

Je viens d'installer debian avec gdm3 sur un nouvel ordinateur portable, mais lorsque je branche mon second écran en vga dessus il ne détecte rien et celui ci affiche "no signal". Pourtant avec mon ancien portable tout fonctionnait parfaitement. Je ne sais pas d'ou ça vient, il se pourrai de ce que j'ai compris que ça vienne des pilotes de la carte graphique.

Mon nouveau portable est un Asus Aspire v3 772G avec un i7 et une nvidia geforce gtx 760m.
L'ancien avait une nvidia gforce 210m.

Si qqun se sent le cœur à m'aider je suis à l'écoute

$ uname -a
Linux elnkx 3.2.0-4-686-pae #1 SMP Debian 3.2.51-1 i686 GNU/Linux

$ lspci
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 05)
00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #4 (rev d5)
00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation Device 11e3 (rev a1)
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
0d:00.0 Network controller: Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01)
0e:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)

A l'origine mon xrandr avec les 2 écrans (mais non fonctionnel) et sans les drivers ( puisque je n'arrive pas à les installer) affiche :

$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
   1920x1080       0.0*

une fois que j'ai essayer de les installer j'ai:

#xrandr
Can't open display

et le startx me retourne :

xorg-server 2:1.12.4-6+deb7u2 (julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.26.0
         Before reporting plroblems, check http://wiki.x.org
         to make sure that you have the latest version.
Makers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, not implemented, (??) unknown.
(==) Lig file: "/var/log/Xorg.0.log", Time: Sun Dec 29 18:44:05 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/Xorg.conf.d"

Fatal server error:
no screens found

Please consult the X.Orp Foundation support
          at http://wiki.x.org
  for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable ti connect to X server: Connection refused
xinit: server error

Je n'ai pas nécessairement besoin des pilotes nvidia mais j'aimerai avoir la possibilité de connecter mon 2nd écran en vga sur mon portable.

elnk · Détection 2nd écran, pilote nvidia

Merci pour la réponse.

En fait le controller VGA est sur la carte Intel et non sur la nvidia. Mais sont utilisation est assez étrange lorsque j'install différentes distrib.

Lors que j installe Debian avec les 2 ecrans (celui du portable et le 2nd sur le vga) tout se passe à peu pres bien à ceci prés que le 2eme écran n'est pas du tout détecté ça fait comme s'il n'était pas branché.
Quand je veux installer Ubuntu ca éteint mon écran de portable et lance l installe sur le 2nd écran, et au debut de l'installe ca éteint le second écran et rien ne s'affiche sur celui du portable.
Pour ArchLinux, l'installe commence sur l'écran de mon portable bascule sur le 2nd écran apres la selection de l'installe et la suite, comme pr ubuntu.

alors Débian est ma solution pr le moment. Et j'aimerai savoir s'il y a possibilité pour configurer ma sortie vga sur le 2eme écran ?

elnk · Probleme Nvidia xorg.conf

Oki, moi j'ai pas vraiment réussi à régler le problème
Étant donné que mes paramètres de nvidia-setting s'applique (après un redémarrage de session) lorsque je lance "nvidia-settings" j'ai pallié avec un script qui lance nvidia-settings au démarrage de la session et le referme c'est tres bidouille et pas propre

elnk · Probleme Nvidia xorg.conf

Bah apres un sdudo nvidia-settings j'ai :

@elnk-linux:~# sudo nvidia-settings

ERROR: Cannot open display 'elnk-linux:0.0'.


ERROR: Unable to assign attribute CursorShadow specified on line 22 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowAlpha specified on line 23 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowRed specified on line 24 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowGreen specified on line 25 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowBlue specified on line 26 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowXOffset specified on line 27 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowYOffset specified on line 28 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute SyncToVBlank specified on line 29 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute LogAniso specified on line 30 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute FSAA specified on line 31 of configuration
       file '/home/elnk/.nvidia-settings-rc' (no Display connection).


ERROR: Unable to assign attribute TextureSharpen specified on line 32 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute AllowFlipping specified on line 33 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute FSAAAppControlled specified on line 34 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute LogAnisoAppControlled specified on line 35 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute OpenGLImageSettings specified on line 36 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute RedBrightness specified on line 37 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute GreenBrightness specified on line 38 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute BlueBrightness specified on line 39 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute RedContrast specified on line 40 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute GreenContrast specified on line 41 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute BlueContrast specified on line 42 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute RedGamma specified on line 43 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute GreenGamma specified on line 44 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute BlueGamma specified on line 45 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute DigitalVibrance specified on line 46 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute ImageSharpening specified on line 47 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute XVideoTextureSyncToVBlank specified on line
       48 of configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute XVideoBlitterSyncToVBlank specified on line
       49 of configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute XVideoSyncToDisplay specified on line 50 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).

elnk · Probleme Nvidia xorg.conf

elnk · Probleme Nvidia xorg.conf

Apparemment on aurait le même problème et le xorg.conf pas prit en compte je ne sais pas vraiment d'où ça vient

elnk · Probleme Dual boot W7/Ubuntu

Bonjour à tous,

Je sollicite voter aide parce que j'avais d'installer sur un disque ubuntu et Windows7 en dual boot, tout fonctionnait parfaitement
jusqu'à ce qu'on me demande de désinstaller ubuntu.

Avec un live CD de ubuntu que j'ai donc lancé puis ensuite avec gparted j'ai delete les partitions de linux à savoit le swap et l ext3, puis j'ai redimensionné a la hausse la taille de la partition de Windows 7.

Cependant au redémarrage de l'ordinateur je me suis retrouver avec une Erreur Grub. Et je ne vois pas comment réinstaller ce composant.
De plus il semblerait que la le disque contenant plus qu'une partition ntfs maintenant ne suis pas monté, je ne sais pas comment le faire. Et que en plus il soit unknown

Si vous pouviez m'apporter de l'aide, je vous en remercie

elnk · Problème Empathy 2.27.5 & Thèmes Adium (Résolu)

J reviens sur ce pose je viens de faire la manip que tu as indiqué, et les themes mis dans /adium/messages-syles/ n'apparaissent pas dans empathy

elnk · Problème Empathy 2.27.5 & Thèmes Adium (Résolu)

Ha oui autant pour moi, j'avais tout simplement mal écris " /messages-styles/ " !! Qui doit être : " /message-styles/ "

Merci a toi pour ton petit tuto tout simple et très fonctionnel !

elnk · [Résolu]Problème horloge :/

Bonjour à tous,

J'ai un soucis avec l'heure elle indique toujours avec une heure de retard je n arrive pas à résoudre le problème,

j'ai essayé avec la console en root et je l'ai aussi changer dans le bios, mais a chaque fois elle se remet avec une heure en moins

Si vous avez une idée pour régler ce soucis je suis preneur

Merci,

elnk · [Résolu]Problème horloge :/

Merci bien

elnk · Problème température pc

Bonsoir,

J'ai un soucis avec mon pc qui n'arrête pas de reboot ou de s'éteindre tout seul, je soupçonne une température du

borthbridge sur une cm: FMCP7AM, et je voudrais savoir s'il y avait un moyen de contrôler cette température, du mcp du coup ??

Merci,

elnk · Problème température pc

Oui merci willcoyote c'est fait j'arrive a voir la température de mon cpu

nornor@nornor-desktop:~$ acpi -V
No support for device type: power_supply
No support for device type: power_supply
Thermal 0: ok, 16.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 127.0 degrees C
Cooling 0: Processor 0 of 3
Cooling 1: Processor 0 of 3
Cooling 2: Processor 0 of 3
Cooling 3: Processor 0 of 10
nornor@nornor-desktop:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:       +17.0°C  (crit = +127.0°C)                  

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +33.0°C  (high = +74.0°C, crit = +100.0°C)  

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +31.0°C  (high = +74.0°C, crit = +100.0°C)  

coretemp-isa-0002
Adapter: ISA adapter
Core 2:      +39.0°C  (high = +74.0°C, crit = +100.0°C)  

coretemp-isa-0003
Adapter: ISA adapter
Core 3:      +39.0°C  (high = +74.0°C, crit = +100.0°C)  

nornor@nornor-desktop:~$

Mais je n'arrive pas à voir la température du northbridge

elnk · Problème température pc

Arf surement , je vais continuer de chercher encore un peu et merci quand même.

elnk · Bug grub :/

Bonjour à tous,

Je ne connais pas bien linux et j'ai du mal à me dépatouiller d'un petit problème
J'avais Ubuntu et windows 7 sur un même disque avec grub tout fonctionnai bien!

J'ai installer par la suite une autre distribution linux sur le même disque mais maintenant grub ne point plus que vers cette dernière bien qu'il affiche les autres OS.

A partir de cette nouvelle distribution j'ai vu qu'elle utilisai son grub avec son menu.list et qu'il était différents de l'ancien puisque l'ancien grub n'as pas dans menu.list la nouvelle distribution.

Je n'arrive pas à faire en sorte de pouvoir retourner sur windows et ubuntu

Pour Ubuntu : J'ai "Error 15: File not found"

elnk · Bug grub :/

Merci et désolé de répondre si tardivement,

J'ai essayer en suivant la doc mais je n'arrive toujours pas à accéder à mes autres os.
Le probleme n'est pas que je ne possede plus grub c'est qu'il y en a 2
Lorsque j'essai de charger windows il me pose une erreur et le pc doit reboot
et lorsque j essai de charger ubuntu ça me dit que je dois charger le kernel en premier

elnk · Bug grub :/

je ne sais pas du tout si cela peut etre utile mais je vous mets les quelques commandes données dans la doc :

root@bt:~# os-prober
/usr/bin/os-prober: line 41: type: dmraid: not found
/dev/sda1:Windows Vista/Longhorn (loader):Windows:chain
/dev/sda6:Ubuntu 10.10 (10.10):Ubuntu:linux


root@bt:~# fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x8c448c44

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            1913       31871   240642048    7  HPFS/NTFS
/dev/sda2   *           1        1913    15360000   83  Linux
/dev/sda3           31872       60801   232380225    5  Extended
/dev/sda5           59674       60801     9060628+  82  Linux swap / Solaris
/dev/sda6           31872       59673   223319502   83  Linux

Partition table entries are not in disk order
root@bt:~# update-grub
Updating /boot/grub/grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35.8
Found initrd image: /boot/initrd.img-2.6.35.8
Found memtest86+ image: /boot/memtest86+.bin
Found Windows Vista/Longhorn (loader) on /dev/sda1
Found Ubuntu 10.10 (10.10) on /dev/sda6
done
root@bt:~#

elnk · Nvidia-settings soucis :(

Bonjour à tous,
J'ai un petit soucis avec mon nvidia-settings
C'est à dire que j'ai l'impression qu'il ne prend pas en compte les changements/paramèters que je choisie
apres un redemarrafge ou quand je quitte puis retourne sur ma session
Les chanegment se fond par cntre à partir du moment ou je lance nvidia-settings.
J'ai donc pallier se probléme avec a chaque demarrage de session avec un script qui lance nvidia-settings
puis le referme mais c'est un peu lourd et ne me permet pas de comprendre et reglé le vrai soucis:/

Lorsque je lance un "sudo nvidia-settings", voilà le retour ( en plus du panneau nvidia évidement ) :

elnk@elnk-linux:~$ sudo nvidia-settings
[sudo] password for elnk: 

ERROR: Cannot open display 'elnk-linux:0.0'.


ERROR: Unable to assign attribute CursorShadow specified on line 22 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowAlpha specified on line 23 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowRed specified on line 24 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowGreen specified on line 25 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowBlue specified on line 26 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowXOffset specified on line 27 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute CursorShadowYOffset specified on line 28 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute SyncToVBlank specified on line 29 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute LogAniso specified on line 30 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute FSAA specified on line 31 of configuration
       file '/home/elnk/.nvidia-settings-rc' (no Display connection).


ERROR: Unable to assign attribute TextureSharpen specified on line 32 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute AllowFlipping specified on line 33 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute FSAAAppControlled specified on line 34 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute LogAnisoAppControlled specified on line 35 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute OpenGLImageSettings specified on line 36 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute RedBrightness specified on line 37 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute GreenBrightness specified on line 38 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute BlueBrightness specified on line 39 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute RedContrast specified on line 40 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute GreenContrast specified on line 41 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute BlueContrast specified on line 42 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute RedGamma specified on line 43 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute GreenGamma specified on line 44 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute BlueGamma specified on line 45 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute DigitalVibrance specified on line 46 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute ImageSharpening specified on line 47 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute XVideoTextureSyncToVBlank specified on line
       48 of configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute XVideoBlitterSyncToVBlank specified on line
       49 of configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).


ERROR: Unable to assign attribute XVideoSyncToDisplay specified on line 50 of
       configuration file '/home/elnk/.nvidia-settings-rc' (no Display
       connection).

Xorg.conf :

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 260.19.06  (buildd@palmer)  Mon Oct  4 16:01:38 UTC 2010

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 260.19.06  (buildmeister@builder101)  Mon Sep 13 07:06:38 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
    # generated from default
EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "IQT Q995"
    HorizSync       30.0 - 96.0
    VertRefresh     50.0 - 150.0
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GT"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
    Option         "NoLogo" "True"
    SubSection     "Display"
        Virtual     1280 1024
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "NoLogo" "True"
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "1152x864_100 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Xorg.0.log :

[    19.808] 
X.Org X Server 1.9.0
Release Date: 2010-08-20
[    19.808] X Protocol Version 11, Revision 0
[    19.808] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[    19.808] Current Operating System: Linux elnk-linux 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 10:18:49 UTC 2010 i686
[    19.808] Kernel command line: root=UUID=680739b9-c4ef-48e5-b877-1f2fa93f9433 ro splash vga=792 
[    19.808] Build Date: 23 November 2010  09:54:06PM
[    19.808] xorg-server 2:1.9.0-0ubuntu7.1 (For technical support please see http://www.ubuntu.com/support) 
[    19.808] Current version of pixman: 0.18.4
[    19.808]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    19.808] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.808] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec  2 21:27:41 2010
[    19.838] (==) Using config file: "/etc/X11/xorg.conf"
[    19.838] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.869] (==) ServerLayout "Default Layout"
[    19.869] (**) |-->Screen "Screen0" (0)
[    19.869] (**) |   |-->Monitor "Monitor0"
[    19.869] (**) |   |-->Device "Device0"
[    19.869] (**) |-->Input Device "Keyboard0"
[    19.869] (**) |-->Input Device "Mouse0"
[    19.869] (**) Option "Xinerama" "0"
[    19.869] (==) Automatically adding devices
[    19.869] (==) Automatically enabling devices
[    19.892] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    19.892]     Entry deleted from font path.
[    19.928] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[    19.928] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    19.928] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    19.928] (WW) Disabling Keyboard0
[    19.928] (WW) Disabling Mouse0
[    19.928] (II) Loader magic: 0x81f8e00
[    19.928] (II) Module ABI versions:
[    19.928]     X.Org ANSI C Emulation: 0.4
[    19.928]     X.Org Video Driver: 8.0
[    19.928]     X.Org XInput driver : 11.0
[    19.928]     X.Org Server Extension : 4.0
[    19.929] (--) PCI:*(0:5:0:0) 10de:0391:1043:81f7 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, I/O @ 0x00006c00/128, BIOS @ 0x????????/131072
[    19.929] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    19.929] (II) "extmod" will be loaded by default.
[    19.929] (II) "dbe" will be loaded by default.
[    19.929] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    19.929] (II) "record" will be loaded by default.
[    19.929] (II) "dri" will be loaded by default.
[    19.929] (II) "dri2" will be loaded by default.
[    19.929] (II) LoadModule: "glx"
[    19.942] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[    20.651] (II) Module glx: vendor="NVIDIA Corporation"
[    20.651]     compiled for 4.0.2, module version = 1.0.0
[    20.651]     Module class: X.Org Server Extension
[    20.651] (II) NVIDIA GLX Module  260.19.06  Mon Sep 13 07:01:31 PDT 2010
[    20.651] (II) Loading extension GLX
[    20.651] (II) LoadModule: "extmod"
[    20.687] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    20.696] (II) Module extmod: vendor="X.Org Foundation"
[    20.696]     compiled for 1.9.0, module version = 1.0.0
[    20.696]     Module class: X.Org Server Extension
[    20.696]     ABI class: X.Org Server Extension, version 4.0
[    20.696] (II) Loading extension MIT-SCREEN-SAVER
[    20.696] (II) Loading extension XFree86-VidModeExtension
[    20.696] (II) Loading extension XFree86-DGA
[    20.696] (II) Loading extension DPMS
[    20.696] (II) Loading extension XVideo
[    20.696] (II) Loading extension XVideo-MotionCompensation
[    20.696] (II) Loading extension X-Resource
[    20.696] (II) LoadModule: "dbe"
[    20.696] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    20.697] (II) Module dbe: vendor="X.Org Foundation"
[    20.697]     compiled for 1.9.0, module version = 1.0.0
[    20.697]     Module class: X.Org Server Extension
[    20.697]     ABI class: X.Org Server Extension, version 4.0
[    20.697] (II) Loading extension DOUBLE-BUFFER
[    20.697] (II) LoadModule: "record"
[    20.697] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    20.698] (II) Module record: vendor="X.Org Foundation"
[    20.698]     compiled for 1.9.0, module version = 1.13.0
[    20.698]     Module class: X.Org Server Extension
[    20.698]     ABI class: X.Org Server Extension, version 4.0
[    20.698] (II) Loading extension RECORD
[    20.698] (II) LoadModule: "dri"
[    20.698] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    20.699] (II) Module dri: vendor="X.Org Foundation"
[    20.699]     compiled for 1.9.0, module version = 1.0.0
[    20.699]     ABI class: X.Org Server Extension, version 4.0
[    20.699] (II) Loading extension XFree86-DRI
[    20.699] (II) LoadModule: "dri2"
[    20.700] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    20.700] (II) Module dri2: vendor="X.Org Foundation"
[    20.700]     compiled for 1.9.0, module version = 1.2.0
[    20.700]     ABI class: X.Org Server Extension, version 4.0
[    20.700] (II) Loading extension DRI2
[    20.700] (II) LoadModule: "nvidia"
[    20.700] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[    20.742] (II) Module nvidia: vendor="NVIDIA Corporation"
[    20.742]     compiled for 4.0.2, module version = 1.0.0
[    20.742]     Module class: X.Org Video Driver
[    20.755] (II) NVIDIA dlloader X Driver  260.19.06  Mon Sep 13 06:37:13 PDT 2010
[    20.759] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    20.759] (++) using VT number 7

[    20.769] (II) Loading sub module "fb"
[    20.769] (II) LoadModule: "fb"
[    20.769] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.777] (II) Module fb: vendor="X.Org Foundation"
[    20.777]     compiled for 1.9.0, module version = 1.0.0
[    20.777]     ABI class: X.Org ANSI C Emulation, version 0.4
[    20.777] (II) Loading sub module "wfb"
[    20.777] (II) LoadModule: "wfb"
[    20.778] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    20.787] (II) Module wfb: vendor="X.Org Foundation"
[    20.787]     compiled for 1.9.0, module version = 1.0.0
[    20.787]     ABI class: X.Org ANSI C Emulation, version 0.4
[    20.787] (II) Loading sub module "ramdac"
[    20.787] (II) LoadModule: "ramdac"
[    20.787] (II) Module "ramdac" already built-in
[    20.805] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    20.805] (==) NVIDIA(0): RGB weight 888
[    20.805] (==) NVIDIA(0): Default visual is TrueColor
[    20.805] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    20.805] (**) NVIDIA(0): Option "NoLogo" "True"
[    20.805] (**) NVIDIA(0): Option "TwinView" "0"
[    20.805] (**) NVIDIA(0): Option "MetaModes" "1152x864_100 +0+0"
[    20.805] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
[    20.807] (**) NVIDIA(0): Enabling RENDER acceleration
[    20.807] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    20.807] (II) NVIDIA(0):     enabled.
[    21.920] (II) NVIDIA(0): NVIDIA GPU GeForce 7600 GT (G73) at PCI:5:0:0 (GPU-0)
[    21.920] (--) NVIDIA(0): Memory: 262144 kBytes
[    21.920] (--) NVIDIA(0): VideoBIOS: 05.73.22.19.00
[    21.920] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    21.920] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    21.920] (--) NVIDIA(0): Connected display device(s) on GeForce 7600 GT at PCI:5:0:0
[    21.920] (--) NVIDIA(0):     IQT Q995 (CRT-0)
[    21.920] (--) NVIDIA(0): IQT Q995 (CRT-0): 400.0 MHz maximum pixel clock
[    21.922] (II) NVIDIA(0): Assigned Display Device: CRT-0
[    21.922] (II) NVIDIA(0): Validated modes:
[    21.922] (II) NVIDIA(0):     "1152x864_100+0+0"
[    21.922] (II) NVIDIA(0): Virtual screen size determined to be 1152 x 864
[    21.926] (--) NVIDIA(0): DPI set to (83, 84); computed from "UseEdidDpi" X config
[    21.926] (--) NVIDIA(0):     option
[    21.933] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    21.933] (--) Depth 24 pixmap format is 32 bpp
[    21.934] (II) NVIDIA(0): Initialized GPU GART.
[    21.946] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    21.946] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    21.946] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    21.946] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    21.946] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    21.946] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    21.946] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    21.946] (II) NVIDIA(0):     Config Options in the README.
[    21.946] (II) NVIDIA(0): Setting mode "1152x864_100+0+0"
[    22.019] (II) Loading extension NV-GLX
[    22.053] (II) NVIDIA(0): Initialized OpenGL Acceleration
[    22.089] (==) NVIDIA(0): Disabling shared memory pixmaps
[    22.090] (II) NVIDIA(0): Initialized X Rendering Acceleration
[    22.090] (==) NVIDIA(0): Backing store disabled
[    22.090] (==) NVIDIA(0): Silken mouse enabled
[    22.091] (==) NVIDIA(0): DPMS enabled
[    22.091] (II) Loading extension NV-CONTROL
[    22.091] (II) Loading extension XINERAMA
[    22.091] (II) Loading sub module "dri2"
[    22.091] (II) LoadModule: "dri2"
[    22.092] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[    22.092] (II) NVIDIA(0): [DRI2] Setup complete
[    22.092] (==) RandR enabled
[    22.092] (II) Initializing built-in extension Generic Event Extension
[    22.092] (II) Initializing built-in extension SHAPE
[    22.092] (II) Initializing built-in extension MIT-SHM
[    22.092] (II) Initializing built-in extension XInputExtension
[    22.092] (II) Initializing built-in extension XTEST
[    22.092] (II) Initializing built-in extension BIG-REQUESTS
[    22.092] (II) Initializing built-in extension SYNC
[    22.092] (II) Initializing built-in extension XKEYBOARD
[    22.092] (II) Initializing built-in extension XC-MISC
[    22.092] (II) Initializing built-in extension SECURITY
[    22.092] (II) Initializing built-in extension XINERAMA
[    22.092] (II) Initializing built-in extension XFIXES
[    22.092] (II) Initializing built-in extension RENDER
[    22.092] (II) Initializing built-in extension RANDR
[    22.092] (II) Initializing built-in extension COMPOSITE
[    22.092] (II) Initializing built-in extension DAMAGE
[    22.092] (II) Initializing built-in extension GESTURE
[    22.092] (II) Initializing extension GLX
[    22.258] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    22.279] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    22.279] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.279] (II) LoadModule: "evdev"
[    22.279] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.302] (II) Module evdev: vendor="X.Org Foundation"
[    22.302]     compiled for 1.9.0, module version = 2.3.2
[    22.302]     Module class: X.Org XInput Driver
[    22.302]     ABI class: X.Org XInput driver, version 11.0
[    22.302] (**) Power Button: always reports core events
[    22.302] (**) Power Button: Device: "/dev/input/event1"
[    22.302] (II) Power Button: Found keys
[    22.302] (II) Power Button: Configuring as keyboard
[    22.302] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    22.302] (**) Option "xkb_rules" "evdev"
[    22.302] (**) Option "xkb_model" "pc105"
[    22.303] (**) Option "xkb_layout" "fr"
[    22.303] (**) Option "xkb_variant" "oss"
[    22.305] (II) XKB: reuse xkmfile /var/lib/xkb/server-6CCE7350BC740BB33D520367F4A10E64192A358C.xkm
[    22.313] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    22.313] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.313] (**) Power Button: always reports core events
[    22.313] (**) Power Button: Device: "/dev/input/event0"
[    22.313] (II) Power Button: Found keys
[    22.313] (II) Power Button: Configuring as keyboard
[    22.313] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    22.313] (**) Option "xkb_rules" "evdev"
[    22.313] (**) Option "xkb_model" "pc105"
[    22.313] (**) Option "xkb_layout" "fr"
[    22.313] (**) Option "xkb_variant" "oss"
[    22.314] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[    22.314] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[    22.314] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    22.314] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[    22.314] (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[    22.314] (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[    22.314] (II) Logitech USB-PS/2 Optical Mouse: Found relative axes
[    22.314] (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[    22.314] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    22.314] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[    22.314] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    22.314] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[    22.314] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[    22.315] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    22.315] (II) No input driver/identifier specified (ignoring)
[    22.319] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    22.319] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    22.319] (**) AT Translated Set 2 keyboard: always reports core events
[    22.319] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    22.320] (II) AT Translated Set 2 keyboard: Found keys
[    22.320] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    22.320] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    22.320] (**) Option "xkb_rules" "evdev"
[    22.320] (**) Option "xkb_model" "pc105"
[    22.320] (**) Option "xkb_layout" "fr"
[    22.320] (**) Option "xkb_variant" "oss"
[    93.973] (II) XKB: reuse xkmfile /var/lib/xkb/server-4D33D8BF09D21CF5AB419CE4CC95E4D787E6D915.xkm
[150191.942] (II) config/udev: removing device Logitech USB-PS/2 Optical Mouse
[150191.968] (II) Logitech USB-PS/2 Optical Mouse: Close
[150191.977] (II) UnloadModule: "evdev"
[247731.263] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[247731.263] (II) No input driver/identifier specified (ignoring)
[247731.267] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[247731.267] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[247731.270] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[247731.270] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[247731.270] (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[247731.270] (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[247731.270] (II) Logitech USB-PS/2 Optical Mouse: Found relative axes
[247731.270] (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[247731.270] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[247731.270] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[247731.270] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[247731.279] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[247731.279] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[250816.302] (II) XKB: reuse xkmfile /var/lib/xkb/server-4D33D8BF09D21CF5AB419CE4CC95E4D787E6D915.xkm
[259448.785] (II) XKB: reuse xkmfile /var/lib/xkb/server-4D33D8BF09D21CF5AB419CE4CC95E4D787E6D915.xkm
[262965.839] (II) XKB: reuse xkmfile /var/lib/xkb/server-4D33D8BF09D21CF5AB419CE4CC95E4D787E6D915.xkm
[262975.071] (II) XKB: reuse xkmfile /var/lib/xkb/server-4D33D8BF09D21CF5AB419CE4CC95E4D787E6D915.xkm
[263012.964] (II) XKB: reuse xkmfile /var/lib/xkb/server-4D33D8BF09D21CF5AB419CE4CC95E4D787E6D915.xkm

elnk · Nvidia-settings soucis :(

up ? svp

elnk · [Résolu]MP3 pas de sons :(

He bien j'ai essayer avec VLC, Amarok et rythmbox

Ils lisent tous les 3 le mp3 sans qu'il y ai du son !
Cependant avec VLC dans les préférences en Audio : Module de sortie => Sortie audio ALSA ... bon alors je viens de découvrire que maintenant ca fonctionnai avec ce que je venai de faire ...

Merci bien

elnk · [Résolu]MP3 pas de sons :(

Heu pour préciser ... j'ai vu ça au fur de mon précédent message d'ou le manque de cohérence ! Enfin que l'on peut trouver au poste

elnk · [Résolu]Plus de sons :/

Cc jrev, oui j'ai été voir, il n'y a rien dans matériel, just dans l'onglet "Sortie", il y a 'Dummy Output ( stereo )'

elnk · [Résolu]Plus de sons :/

up ???

elnk · [Résolu]Plus de sons :/

Bon alors j'ai reussi à remettre en place le son dans mon navigateur et sous wine ( teamspeak .. )

Grâce à ce tuto

Mais j'ai toujours pas de son pour mes mp3

elnk · [Résolu]Plus de sons :/

et ca ne vient pas des codecs up???

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#0 -1 » Détection 2nd écran, pilote nvidia » Le 29/12/2013, à 21:12

#1 Re : -1 » Détection 2nd écran, pilote nvidia » Le 30/12/2013, à 12:57

#2 Re : -1 » Probleme Nvidia xorg.conf » Le 30/11/2010, à 20:54

#3 Re : -1 » Probleme Nvidia xorg.conf » Le 01/12/2010, à 17:02

#4 Re : -1 » Probleme Nvidia xorg.conf » Le 02/12/2010, à 11:59

#5 Re : -1 » Probleme Nvidia xorg.conf » Le 20/12/2010, à 21:49

#6 -1 » Probleme Dual boot W7/Ubuntu » Le 27/04/2011, à 17:10

#7 Re : -1 » Problème Empathy 2.27.5 & Thèmes Adium (Résolu) » Le 01/12/2010, à 18:12

#8 Re : -1 » Problème Empathy 2.27.5 & Thèmes Adium (Résolu) » Le 01/12/2010, à 20:33

#9 -1 » [Résolu]Problème horloge :/ » Le 20/01/2011, à 20:07

#10 Re : -1 » [Résolu]Problème horloge :/ » Le 20/01/2011, à 21:14

#11 -1 » Problème température pc » Le 16/01/2011, à 22:38

#12 Re : -1 » Problème température pc » Le 17/01/2011, à 13:38

#13 Re : -1 » Problème température pc » Le 18/01/2011, à 23:19

#14 -1 » Bug grub :/ » Le 18/12/2010, à 16:13

#15 Re : -1 » Bug grub :/ » Le 05/01/2011, à 00:12

#16 Re : -1 » Bug grub :/ » Le 05/01/2011, à 00:19

#17 -1 » Nvidia-settings soucis :( » Le 06/12/2010, à 15:30

#18 Re : -1 » Nvidia-settings soucis :( » Le 07/12/2010, à 09:57

#19 Re : -1 » [Résolu]MP3 pas de sons :( » Le 01/12/2010, à 23:16

#20 Re : -1 » [Résolu]MP3 pas de sons :( » Le 01/12/2010, à 23:17

#21 Re : -1 » [Résolu]Plus de sons :/ » Le 30/11/2010, à 20:51

#22 Re : -1 » [Résolu]Plus de sons :/ » Le 30/11/2010, à 22:14

#23 Re : -1 » [Résolu]Plus de sons :/ » Le 30/11/2010, à 22:43

#24 Re : -1 » [Résolu]Plus de sons :/ » Le 01/12/2010, à 13:10

Pied de page des forums