#1 Le 12/06/2017, à 08:55
- Redlet
Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
Bonjour,
Démarrage difficile de l'Asus ROG GL542VX DM435D avec une clé USB. Obligé de désactiver l'ACPI. Après installation, tout fonctionne à merveille sauf :
- pas d'indicateur de batterie
- les touches Fn ne fonctionnent pas
- le pavé tactile ne fonctionne pas
- quand on appuie sur le bouton M/A, l'ordinateur s'arrête brutalement
Une idée ?
Merci d'avance.
Hors ligne
#2 Le 12/06/2017, à 09:25
- malbo
Re : Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
Bonjour,
Depuis une session de ton Ubuntu 16.04 installé, je te prie de faire un rapport Bisnext. C'est le paragraphe 2 (depuis une session standard) que tu dois suivre.
Motif de ma demande : je souhaite vérifier les paramètres de noyau qui sont utilisés et d'autres bricoles également.
Dernière modification par malbo (Le 12/06/2017, à 09:28)
Hors ligne
#3 Le 12/06/2017, à 13:32
- Redlet
Re : Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
Merci Malbo.
Ci-dessous le lien pour accéder au rapport Bisnext que je viens de générer :
https://paste.debian.net/971133/
Hors ligne
#4 Le 12/06/2017, à 14:54
- malbo
Re : Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
Ton rapport Bisnext est là :
Posting 971133 from bn-809e5 posted at 2017-06-12 11:27:12 expires: 2017-07-12 11:27:12
Jun 12, 2017, bisnext report id 809e5
bisnext 0.03
============================ Hardware and System Summary ======================
System: Kernel: 4.4.0-79-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: laptop Mobo: ASUSTeK model: X550VX v: 1.0
BIOS: American Megatrends v: X550VX.300 date: 08/17/2016
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core Intel Core i5-6300HQ (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 17252
clock speeds: min/max: 800/3200 MHz 1: 1600 MHz 2: 1599 MHz
3: 1600 MHz 4: 1600 MHz
Memory: Array-1 capacity: 64 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: 8 GB speed: 2133 MHz type: DDR4
manufacturer: Micron part: 8ATF1G64HZ-2G1B1
Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
Device-3: ChannelB-DIMM0 size: No Module Installed type: N/A
Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
Graphics: Card-1: Intel Skylake Integrated Graphics
bus-ID: 00:02.0 chip-ID: 8086:191b
Card-2: NVIDIA GM107M [GeForce GTX 950M]
bus-ID: 01:00.0 chip-ID: 10de:139a
Display Server: X.Org 1.18.4 drivers: intel (unloaded: modesetting,fbdev,vesa)
Resolution: 1600x900@60.00hz
GLX Renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
GLX Version: 4.3 Mesa 12.0.6 (compat-v: 3.0) Direct Rendering: Yes
Audio: Card Intel Sunrise Point-H HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
Sound: Advanced Linux Sound Architecture v: k4.4.0-79-generic
Network: Card-1: Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter
driver: rtl8821ae port: d000 bus-ID: 02:00.0 chip-ID: 10ec:8821
IF: wlp2s0 state: up mac: <filter>
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: c000
bus-ID: 03:00.1 chip-ID: 10ec:8168
IF: enp3s0f1 state: down mac: <filter>
Drives: HDD Total Size: 128.0GB (22.1% used)
ID-1: /dev/sda model: ADATA_SU800 size: 128.0GB
temp: 42C
Optical: /dev/sr0 model: Slimtype DVD A DA8A6SH
rev: GAA2 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 30G used: 6.4G (23%) fs: ext4 dev: /dev/sda1
label: N/A uuid: 6d5541d1-b853-476f-981b-e5ccd4dc7dae
ID-2: /home size: 73G used: 5.5G (8%) fs: ext4 dev: /dev/sda3
label: N/A uuid: 910bf44f-0dca-40af-b5df-e5fb3748ec6b
ID-3: swap-1 size: 16.39GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
label: N/A uuid: e04aa42e-ed13-432c-b3a6-accef22b1b5e
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 19.8% command: firefox pid: 6159 mem: 414.97MB (5.2%)
2: cpu: 5.5% command: Xorg pid: 944 mem: 62.73MB (0.7%)
3: cpu: 1.2% command: compiz pid: 1422 mem: 43.46MB (0.5%)
4: cpu: 0.7% command: pulseaudio pid: 1206 mem: 11.96MB (0.1%)
5: cpu: 0.6% daemon: ~kworker/u8:3~ pid: 5959 mem: 0.00MB (0.0%)
6: cpu: 0.5% command: bash pid: 7289 mem: 4.33MB (0.0%)
7: cpu: 0.5% daemon: ~kworker/u8:2~ pid: 5953 mem: 0.00MB (0.0%)
8: cpu: 0.3% daemon: ~kworker/u8:0~ pid: 6010 mem: 0.00MB (0.0%)
9: cpu: 0.1% command: mate-terminal pid: 6246 mem: 31.24MB (0.3%)
10: cpu: 0.0% command: sed pid: 7338 mem: 0.97MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 414.97MB (5.2%) command: firefox pid: 6159 cpu: 19.8%
2: mem: 247.06MB (3.1%) command: java pid: 2556 cpu: 0.0%
3: mem: 62.73MB (0.7%) command: Xorg pid: 944 cpu: 5.5%
4: mem: 60.54MB (0.7%) command: caja pid: 1193 cpu: 0.0%
5: mem: 48.12MB (0.6%) command: mate-panel pid: 1172 cpu: 0.0%
6: mem: 43.46MB (0.5%) command: compiz pid: 1422 cpu: 1.2%
7: mem: 36.66MB (0.4%) command: nm-applet pid: 1232 cpu: 0.0%
8: mem: 31.24MB (0.3%) command: mate-terminal pid: 6246 cpu: 0.1%
9: mem: 30.05MB (0.3%) command: applet.py (started by: python3) pid: 1215 cpu: 0.0%
10: mem: 30.02MB (0.3%) command: wnck-applet pid: 1197 cpu: 0.0%
Info: Processes: 179 Uptime: 3:10 Memory: 953.2/7877.0MB
Init: systemd v: 229 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.19
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
None
_____________________________ md5sum of EFI files _____________________________
None
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location. It also
embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
(,msdos1)/boot/grub
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 119,2 GiB, 128035676160 octets, 250069680 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 63,999,999 63,997,952 83 Linux
/dev/sda2 64,000,000 96,002,047 32,002,048 82 Linux swap / Solaris
/dev/sda3 96,002,048 250,068,991 154,066,944 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 6d5541d1-b853-476f-981b-e5ccd4dc7dae ext4
/dev/sda2 e04aa42e-ed13-432c-b3a6-accef22b1b5e swap
/dev/sda3 910bf44f-0dca-40af-b5df-e5fb3748ec6b ext4
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 juin 12 10:16 ata-ADATA_SU800_2H1820010430 -> ../../sda
lrwxrwxrwx 1 root root 10 juin 12 10:16 ata-ADATA_SU800_2H1820010430-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 12 10:16 ata-ADATA_SU800_2H1820010430-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 12 10:16 ata-ADATA_SU800_2H1820010430-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 juin 12 11:25 ata-SlimtypeDVD_A_DA8A6SH_3508981_456619507087 -> ../../sr0
lrwxrwxrwx 1 root root 9 juin 12 10:16 wwn-0x5707c181004d2a34 -> ../../sda
lrwxrwxrwx 1 root root 10 juin 12 10:16 wwn-0x5707c181004d2a34-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 12 10:16 wwn-0x5707c181004d2a34-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 12 10:16 wwn-0x5707c181004d2a34-part3 -> ../../sda3
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda3 /home ext4 (rw,relatime,data=ordered)
__________________________=== Boot Files Content ===___________________________
___________________________ sda1/boot/grub/grub.cfg: ___________________________
File size: 9619, Line count: 284, Menu entries (sub entries included) : 7
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6d5541d1-b853-476f-981b-e5ccd4dc7dae' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 6d5541d1-b853-476f-981b-e5ccd4dc7dae
else
search --no-floppy --fs-uuid --set=root 6d5541d1-b853-476f-981b-e5ccd4dc7dae
fi
linux /boot/vmlinuz-4.4.0-79-generic root=UUID=6d5541d1-b853-476f-981b-e5ccd4dc7dae ro acpi=off quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-79-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 6d5541d1-b853-476f-981b-e5ccd4dc7dae
else
search --no-floppy --fs-uuid --set=root 6d5541d1-b853-476f-981b-e5ccd4dc7dae
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 6d5541d1-b853-476f-981b-e5ccd4dc7dae
else
search --no-floppy --fs-uuid --set=root 6d5541d1-b853-476f-981b-e5ccd4dc7dae
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda1/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=6d5541d1-b853-476f-981b-e5ccd4dc7dae / ext4 errors=remount-ro 0 1
# /home was on /dev/sda3 during installation
UUID=910bf44f-0dca-40af-b5df-e5fb3748ec6b /home ext4 defaults 0 2
# swap was on /dev/sda2 during installation
UUID=e04aa42e-ed13-432c-b3a6-accef22b1b5e none swap sw 0 0
____________________________ sda1/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="acpi=off"
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.4.0-79-generic root=UUID=6d5541d1-b853-476f-981b-e5ccd4dc7dae ro acpi=off quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 2.180s (kernel) + 11.312s (userspace) = 13.492s
blame, first 10:
NetworkManager-wait-online.service 10.192s
dev-sda1.device 540ms
systemd-backlight@backlight:intel_backlight.service 280ms
accounts-daemon.service 140ms
ModemManager.service 136ms
networking.service 124ms
grub-common.service 116ms
apparmor.service 112ms
NetworkManager.service 104ms
upower.service 104ms
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @11.308s
2 ├─multi-user.target @11.304s
3 │ ntp.service @11.276s +28ms
4 │ network-online.target @11.264s
5 │ NetworkManager-wait-online.service @1.072s +10.192s
6 │ NetworkManager.service @952ms +104ms
7 │ dbus.service @912ms
8 │ basic.target @904ms
9 │ sockets.target @904ms
10 │ snapd.socket @884ms +16ms
11 │ sysinit.target @884ms
12 │ apparmor.service @772ms +112ms
13 │ local-fs.target @772ms
14 │ run-user-1000-gvfs.mount @7.268s
15 │ run-user-1000.mount @5.724s
16 │ local-fs-pre.target @292ms
17 │ systemd-remount-fs.service @288ms +4ms
18 │ ├─systemd-journald.socket @156ms
19 │ │ ├─-.slice @140ms
20 │ │ -.mount @140ms
21 │ │ system.slice @156ms
22 │ │ -.slice @140ms
23 │ │ ...
24 │ system.slice @156ms
25 │ ...
26 ntp.service @11.276s +28ms
27 ...
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 7.7G 877M 5.6G 155M 1.2G 6.4G
Swap: 15G 0B 15G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 / ext4 30G 6.4G 23G 23% 14%
/dev/sda3 /home ext4 73G 5.5G 64G 8% 1%
Swap partition for hibernation : UUID=e04aa42e-ed13-432c-b3a6-accef22b1b5e
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13d3:3414 IMC Networks
Bus 001 Device 003: ID 04f2:b547 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 9: Dev 4, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 9: Dev 4, If 1, Class=Wireless, Driver=btusb, 12M
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
___________________________________ Modules Loaded ____________________________
Module Size Used by
ablk_helper 16384 1 aesni_intel
aesni_intel 167936 6
aes_x86_64 20480 1 aesni_intel
ahci 36864 3
ansi_cprng 16384 0
arc4 16384 2
autofs4 40960 2
bluetooth 520192 29 bnep,btbcm,btrtl,btusb,rfcomm,btintel
bnep 20480 2
btbcm 16384 1 btusb
btcoexist 53248 1 rtl8821ae
btintel 16384 1 btusb
btrfs 987136 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 3
cfg80211 565248 2 mac80211,rtlwifi
coretemp 16384 0
crc32_pclmul 16384 0
crc_itu_t 16384 1 udf
crct10dif_pclmul 16384 0
cryptd 20480 3 ghash_clmulni_intel,aesni_intel,ablk_helper
ctr 16384 3
drbg 32768 1
drm 364544 6 ttm,i915_bpo,drm_kms_helper
drm_kms_helper 155648 1 i915_bpo
fb_sys_fops 16384 1 drm_kms_helper
gf128mul 16384 1 lrw
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 118784 3 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 i915_bpo
i915_bpo 1302528 4
input_leds 16384 0
int340x_thermal_zone 16384 1 processor_thermal_device
intel_ips 20480 1 i915_bpo
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_soc_dts_iosf 16384 1 processor_thermal_device
irqbypass 16384 1 kvm
jfs 180224 0
joydev 20480 0
kvm 544768 1 kvm_intel
kvm_intel 172032 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lrw 16384 1 aesni_intel
mac80211 737280 3 rtl_pci,rtlwifi,rtl8821ae
mac_hid 16384 0
media 24576 2 uvcvideo,videodev
mei 98304 1 mei_me
mei_me 36864 0
memstick 20480 1 rtsx_pci_ms
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
msr 16384 0
nls_utf8 16384 0
ntfs 98304 0
nvram 16384 0
parport 49152 3 lp,ppdev,parport_pc
parport_pc 32768 0
ppdev 20480 0
processor_thermal_device 16384 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
rfcomm 69632 2
rtl8821ae 225280 0
rtl_pci 28672 1 rtl8821ae
rtlwifi 77824 2 rtl_pci,rtl8821ae
rtsx_pci 53248 2 rtsx_pci_ms,rtsx_pci_sdmmc
rtsx_pci_ms 20480 0
rtsx_pci_sdmmc 24576 0
serio_raw 16384 0
shpchp 36864 0
snd 81920 17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec 135168 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 86016 1
snd_hda_core 73728 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel 40960 3
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ttm 94208 0
udf 94208 0
ufs 73728 0
usbhid 49152 0
uvcvideo 90112 0
v4l2_common 16384 1 videobuf2_v4l2
video 40960 1 i915_bpo
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 176128 4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
x86_pkg_temp_thermal 16384 0
xfs 970752 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
vendor : NVIDIA Corporation
model : GM107M [GeForce GTX 950M]
modalias : pci:v000010DEd0000139Asv00001043sd00001130bc03sc02i00
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-375 - distro non-free recommended
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
variant: oss
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
None
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.4.0.79.85
linux-headers-4.4.0-21 4.4.0-21.37
linux-headers-4.4.0-21-generic 4.4.0-21.37
linux-headers-4.4.0-79 4.4.0-79.100
linux-headers-4.4.0-79-generic 4.4.0-79.100
linux-headers-generic 4.4.0.79.85
linux-image-4.4.0-21-generic 4.4.0-21.37
linux-image-4.4.0-79-generic 4.4.0-79.100
linux-image-extra-4.4.0-21-generic 4.4.0-21.37
linux-image-extra-4.4.0-79-generic 4.4.0-79.100
linux-image-generic 4.4.0.79.85
Files in /boot directory:
abi-4.4.0-21-generic
abi-4.4.0-79-generic
config-4.4.0-21-generic
config-4.4.0-79-generic
grub
initrd.img-4.4.0-21-generic
initrd.img-4.4.0-79-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-21-generic
System.map-4.4.0-79-generic
vmlinuz-4.4.0-21-generic
vmlinuz-4.4.0-79-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.244000] SCSI subsystem initialized
[ 0.868037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.876037] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
[ 1.188057] scsi host0: ahci
[ 1.188057] scsi host1: ahci
[ 1.508077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.516077] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.516077] scsi 0:0:0:0: Direct-Access ATA ADATA SU800 5A PQ: 0 ANSI: 5
[ 1.516077] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.516077] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.516077] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.520078] scsi 1:0:0:0: CD-ROM Slimtype DVD A DA8A6SH GAA2 PQ: 0 ANSI: 5
[ 1.544079] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.544079] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.544079] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.472137] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.616146] rtl8821ae: Using firmware rtlwifi/rtl8821aefw.bin
[ 2.616146] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[ 3.572206] Bluetooth: hci0: rom_version status=0 version=1
[ 9.936604] wlp2s0: RX AssocResp from 24:05:0f:6d:c1:63 (capab=0x411 status=0 aid=3)
[ 9.944604] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[ 11.732716] Bluetooth: hci0 command 0x0c24 tx timeout
[ 13.736831] Bluetooth: hci0 command 0x0c52 tx timeout
[ 4047.806681] sr 1:0:0:0: [sr0] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4047.806681] blk_update_request: I/O error, dev sr0, sector 2257208
[ 4047.914681] sr 1:0:0:0: [sr0] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4047.914681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4047.914681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4047.978681] sr 1:0:0:0: [sr0] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4047.978681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4047.978681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4048.046681] sr 1:0:0:0: [sr0] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4048.046681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4048.046681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4048.110681] sr 1:0:0:0: [sr0] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4048.110681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4048.110681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4048.170681] sr 1:0:0:0: [sr0] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4048.170681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4048.170681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4048.230681] sr 1:0:0:0: [sr0] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4048.230681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4048.230681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4048.290681] sr 1:0:0:0: [sr0] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4048.290681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4048.290681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4048.350681] sr 1:0:0:0: [sr0] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4048.350681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4048.350681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4048.406681] sr 1:0:0:0: [sr0] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4048.406681] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4048.406681] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4053.510679] sr 1:0:0:0: [sr0] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4053.510679] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4053.510679] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4053.574679] sr 1:0:0:0: [sr0] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4053.574679] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4053.574679] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4053.638679] sr 1:0:0:0: [sr0] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4053.638679] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4053.638679] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4053.702679] sr 1:0:0:0: [sr0] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4053.702679] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4053.702679] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4053.766679] sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4053.766679] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4053.766679] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4053.830679] sr 1:0:0:0: [sr0] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4053.830679] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4053.830679] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4053.894679] sr 1:0:0:0: [sr0] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4053.894679] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4053.894679] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4053.954679] sr 1:0:0:0: [sr0] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4053.954679] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4053.954679] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4054.018678] sr 1:0:0:0: [sr0] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4054.018678] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4054.018678] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4083.182666] sr 1:0:0:0: [sr0] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4083.182666] blk_update_request: I/O error, dev sr0, sector 1934432
[ 4083.270666] sr 1:0:0:0: [sr0] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4083.270666] blk_update_request: I/O error, dev sr0, sector 1934436
[ 4083.270666] Buffer I/O error on dev sr0, logical block 483609, async page read
[ 4083.406666] sr 1:0:0:0: [sr0] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4083.406666] blk_update_request: I/O error, dev sr0, sector 2257208
[ 4083.498666] sr 1:0:0:0: [sr0] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4083.498666] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4083.498666] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4087.690665] sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4087.690665] blk_update_request: I/O error, dev sr0, sector 1934436
[ 4087.690665] Buffer I/O error on dev sr0, logical block 483609, async page read
[ 4087.826665] sr 1:0:0:0: [sr0] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4087.826665] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4087.826665] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4088.950664] sr 1:0:0:0: [sr0] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4088.950664] blk_update_request: I/O error, dev sr0, sector 1934436
[ 4088.950664] Buffer I/O error on dev sr0, logical block 483609, async page read
[ 4089.086664] sr 1:0:0:0: [sr0] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4089.086664] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4089.086664] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4089.362664] sr 1:0:0:0: [sr0] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4089.362664] blk_update_request: I/O error, dev sr0, sector 1934436
[ 4089.362664] Buffer I/O error on dev sr0, logical block 483609, async page read
[ 4089.498664] sr 1:0:0:0: [sr0] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4089.498664] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4089.498664] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4090.002664] sr 1:0:0:0: [sr0] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4090.002664] blk_update_request: I/O error, dev sr0, sector 1934436
[ 4090.002664] Buffer I/O error on dev sr0, logical block 483609, async page read
[ 4090.114664] sr 1:0:0:0: [sr0] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4090.114664] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4090.114664] Buffer I/O error on dev sr0, logical block 564303, async page read
[ 4091.058664] sr 1:0:0:0: [sr0] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4091.058664] blk_update_request: I/O error, dev sr0, sector 1934436
[ 4091.058664] Buffer I/O error on dev sr0, logical block 483609, async page read
[ 4091.190664] sr 1:0:0:0: [sr0] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4091.190664] blk_update_request: I/O error, dev sr0, sector 2257212
[ 4091.190664] Buffer I/O error on dev sr0, logical block 564303, async page read
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=6 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=7 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=8 [slave keyboard (3)]
↳ USB2.0 VGA UVC WebCam id=9 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 1600 x 900, maximum 32767 x 32767
eDP1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.00 + 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1600x900 60.00*
1280x1024 60.02
1440x900 59.89
1280x960 60.00
1368x768 60.00
1360x768 59.80 59.96
1152x864 60.00
1280x720 60.00
1024x768 60.00
1024x576 60.00
960x540 60.00
800x600 60.32 56.25
864x486 60.00
640x480 59.94
720x405 60.00
640x360 60.00
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.268] (==) No Layout section. Using the first Screen section.
[ 3.268] (==) No screen section available. Using defaults.
[ 3.268] (**) |-->Screen "Default Screen Section" (0)
[ 3.268] (**) | |-->Monitor "<default monitor>"
[ 3.272] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.272] (--) PCI:*(0:0:2:0) 8086:191b:1043:1130 rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 3.272] (--) PCI: (0:1:0:0) 10de:139a:1043:1130 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.272] (II) LoadModule: "glx"
[ 3.272] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.284] (II) LoadModule: "intel"
[ 3.284] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.284] (II) LoadModule: "modesetting"
[ 3.284] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3.288] (II) LoadModule: "fbdev"
[ 3.288] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3.288] (II) LoadModule: "vesa"
[ 3.288] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3.288] (WW) Falling back to old probe method for modesetting
[ 3.288] (WW) Falling back to old probe method for fbdev
[ 3.288] (II) Loading sub module "fbdevhw"
[ 3.288] (II) LoadModule: "fbdevhw"
[ 3.288] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3.288] (WW) Falling back to old probe method for vesa
[ 3.288] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.288] (II) intel(0): Output eDP1 has no monitor section
[ 3.304] (II) intel(0): Output HDMI1 has no monitor section
[ 3.304] (II) intel(0): Output DP1 has no monitor section
[ 3.304] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.304] (II) Loading sub module "dri2"
[ 3.304] (II) LoadModule: "dri2"
[ 3.304] (II) Loading sub module "present"
[ 3.304] (II) LoadModule: "present"
[ 3.304] (II) UnloadModule: "modesetting"
[ 3.304] (II) UnloadModule: "fbdev"
[ 3.304] (II) UnloadModule: "vesa"
[ 3.328] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.332] (II) intel(0): Setting screen physical size to 508 x 285
[ 3.356] (II) LoadModule: "evdev"
[ 3.356] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.412] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 3.572] (WW) config/udev: device Logitech USB Receiver already added. Ignoring.
[ 3.576] (WW) config/udev: device Logitech USB Receiver already added. Ignoring.
[ 3.600] (WW) Option "xkb_options" requires a string value
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-79-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-79-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:191b
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:139a
BusID "PCI:1@0:0:0"
Is boot vga? no
Error: can't access /sys/bus/pci/devices/0000:01:00.0/driver
The device is not bound to any driver. Skipping...
Skipping "/dev/dri/card0", driven by "i915_bpo"
Skipping "/dev/dri/card0", driven by "i915_bpo"
Skipping "/dev/dri/card0", driven by "i915_bpo"
Found "/dev/dri/card0", driven by "i915_bpo"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-79-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SU800
LU WWN Device Id: 5 707c18 1004d2a34
Firmware Version: Q0125A
User Capacity: 128 035 676 160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jun 12 13:27:10 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
9 Power_On_Hours ------ 100 100 000 - 23
12 Power_Cycle_Count ------ 100 100 000 - 63
160 Unknown_Attribute ------ 100 100 000 - 0
161 Unknown_Attribute ------ 100 100 000 - 36
163 Unknown_Attribute ------ 100 100 000 - 9
164 Unknown_Attribute ------ 100 100 000 - 2581
165 Unknown_Attribute ------ 100 100 000 - 14
166 Unknown_Attribute ------ 100 100 000 - 3
167 Unknown_Attribute ------ 100 100 000 - 5
148 Unknown_Attribute ------ 100 100 000 - 1617
149 Unknown_Attribute ------ 100 100 000 - 67
150 Unknown_Attribute ------ 100 100 000 - 1
151 Unknown_Attribute ------ 100 100 000 - 47
168 Unknown_Attribute ------ 100 100 000 - 1500
169 Unknown_Attribute ------ 100 100 000 - 100
177 Wear_Leveling_Count ------ 100 100 050 - 0
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
187 Reported_Uncorrect ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 19
194 Temperature_Celsius ------ 100 100 000 - 42
196 Reallocated_Event_Count ------ 100 100 016 - 0
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
225 Unknown_SSD_Attribute PO---- 100 100 000 - 5014
232 Available_Reservd_Space ------ 100 100 000 - 100
241 Total_LBAs_Written ------ 100 100 000 - 5014
242 Total_LBAs_Read ------ 100 100 000 - 3414
245 Unknown_Attribute ------ 100 100 000 - 20648
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedOn a la confirmation que tu utilises le paramètre de noyau acpi=off dans l'extrait suivant :
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.4.0-79-generic root=UUID=6d5541d1-b853-476f-981b-e5ccd4dc7dae ro acpi=off quiet splash vt.handoff=7Il ne faut plus que tu utilises ce paramètre acpi=off : il te permet de démarrer mais il empêche ensuite le bon fonctionnement.
Pour enlever ce paramètre, tu devras procéder comme suit :
1) installation de gksu en vue d'utiliser gksudo :
https://forum.ubuntu-fr.org/viewtopic.p … #p19459481
2) passer la commande suivante dans un terminal :
gksudo gedit /etc/default/grub3) dans le fichier grub qui s'ouvre dans gedit (l'éditeur de texte), supprimer acpi=off :
GRUB_CMDLINE_LINUX="acpi=off"Après modif, ça doit donner ça :
GRUB_CMDLINE_LINUX=""4) enregistrer dans l'éditeur de texte
5) mettre à jour grub.cfg en passant la commande suivante :
sudo update-grubPour parvenir à démarrer après cela, tu devras ajouter le paramètre nomodeset au démarrage comme expliqué dans ce post : https://forum.ubuntu-fr.org/viewtopic.p … 1#p9820021
Ensuite, il faudra que tu installes le pilote propriétaire NVIDIA comme j'explique dans ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p21735533
Dernière modification par malbo (Le 12/06/2017, à 14:59)
Hors ligne
#5 Le 13/06/2017, à 19:05
- Redlet
Re : Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
Merci Malbo !
J'ai supprimé "acpi=off" de /etc/default/grub. OK pour les touches Fn, l'indicateur de batterie. le pavé tactile et l'arrêt de l'ordinateur. En revanche, le ventilateur tourne à fond et fait un bruit énorme !
Pas trouvé comment ajouter le paramètre nomodeset au démarrage. Info complémentaire : j'ai Ubuntu MATE.
Après installation du pilote Nvidia propriétaire, je n'ai plus la résolution 1600x900. Obligé de la rajouter avec xrandr. Et avec le pilote propriétaire, Minecraft ne se lance plus. Problème avec OpenGL.
Après réinstallation du pilote libre, ordinateur complètement planté. Obligé de tout réinstaller 
Tout réinstallé donc, avec "acpi=off", puis à nouveau supprimé ce paramètre de /etc/default/grub. Tout fonctionne bien. Seul problème : le bruit du ventilateur qui tourne à fond bêtement (l'air qui sort est froid).
Une idée ?
Merci d'avance.
Hors ligne
#6 Le 13/06/2017, à 19:13
- malbo
Re : Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
Puisque tu as réinstallé, je te prie de faire un rapport Bisnext pour qu'on puisse avoir l'état actuel.
Hors ligne
#7 Le 13/06/2017, à 23:40
- Redlet
Re : Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
Merci Malbo.
Ci-dessous le lien pour accéder au rapport Bisnext que je viens de générer :
https://paste.debian.net/971369/
Hors ligne
#8 Le 13/06/2017, à 23:50
- Redlet
Re : Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
J'ai été un peu trop vite à répondre. Avant de générer le rapport, j'ai oublié de retirer "acpi=off" que j'ai remis pour calmer le ventilateur. Le problème est qu'en retirant "acpi=off", je ne parviens plus à générer le rapport. Ça bloque après l'affichage de "...hardware and system summary".
Hors ligne
#9 Le 14/06/2017, à 06:14
- malbo
Re : Installation Ubuntu 16.04 sur Asus ROG GL542VX DM435D
Ton dernier rapport Bisnext est là :
Posting 971369 from bn-6e346 posted at 2017-06-13 21:39:21 expires: 2017-07-13 21:39:21
Jun 13, 2017, bisnext report id 6e346
bisnext 0.03
============================ Hardware and System Summary ======================
System: Kernel: 4.4.0-79-generic x86_64 (64 bit gcc: 5.4.0)
Console: tty 0 dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: laptop Mobo: ASUSTeK model: X550VX v: 1.0
BIOS: American Megatrends v: X550VX.300 date: 08/17/2016
Battery No battery data found in /sys or dmidecode. Is one present?
CPU: Quad core Intel Core i5-6300HQ (-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 17383
clock speeds: min/max: 800/3200 MHz 1: 1600 MHz 2: 1600 MHz
3: 1600 MHz 4: 1600 MHz
Memory: Array-1 capacity: 64 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: 8 GB speed: 2133 MHz type: DDR4
manufacturer: Micron part: 8ATF1G64HZ-2G1B1
Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
Device-3: ChannelB-DIMM0 size: No Module Installed type: N/A
Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
Graphics: Card-1: Intel Skylake Integrated Graphics
bus-ID: 00:02.0 chip-ID: 8086:191b
Card-2: NVIDIA GM107M [GeForce GTX 950M]
bus-ID: 01:00.0 chip-ID: 10de:139a
Display Server: X.Org 1.18.4 drivers: intel (unloaded: modesetting,fbdev,vesa)
Resolution: 1600x900@60.00hz
GLX Renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
GLX Version: 4.3 Mesa 12.0.6 (compat-v: 3.0) Direct Rendering: Yes
Audio: Card Intel Sunrise Point-H HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
Sound: Advanced Linux Sound Architecture v: k4.4.0-79-generic
Network: Card-1: Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter
driver: rtl8821ae port: d000 bus-ID: 02:00.0 chip-ID: 10ec:8821
IF: wlp2s0 state: up mac: <filter>
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: c000
bus-ID: 03:00.1 chip-ID: 10ec:8168
IF: enp3s0f1 state: down mac: <filter>
Drives: HDD Total Size: 128.0GB (26.2% used)
ID-1: /dev/sda model: ADATA_SU800 size: 128.0GB
temp: 35C
Optical-1: /dev/sr0 model: Slimtype DVD A DA8A6SH
rev: GAA2 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 30G used: 7.0G (25%) fs: ext4 dev: /dev/sda1
label: N/A uuid: 3469309e-7446-477d-a3dd-0838334bcc26
ID-2: /home size: 73G used: 9.8G (15%) fs: ext4 dev: /dev/sda3
label: N/A uuid: 910bf44f-0dca-40af-b5df-e5fb3748ec6b
ID-3: swap-1 size: 16.39GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
label: N/A uuid: e04aa42e-ed13-432c-b3a6-accef22b1b5e
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 22.9% command: firefox pid: 1885 mem: 447.90MB (5.6%)
2: cpu: 1.7% daemon: ~kworker/u8:1~ pid: 40 mem: 0.00MB (0.0%)
3: cpu: 1.2% daemon: ~kworker/u8:0~ pid: 6 mem: 0.00MB (0.0%)
4: cpu: 0.6% command: Xorg pid: 937 mem: 59.45MB (0.7%)
5: cpu: 0.5% command: bash pid: 2071 mem: 4.37MB (0.0%)
6: cpu: 0.4% command: init pid: 1 mem: 5.68MB (0.0%)
7: cpu: 0.3% daemon: ~kworker/1:1~ pid: 73 mem: 0.00MB (0.0%)
8: cpu: 0.2% command: nm-applet pid: 1234 mem: 36.47MB (0.4%)
9: cpu: 0.2% command: mate-panel pid: 1173 mem: 73.18MB (0.9%)
10: cpu: 0.1% command: marco pid: 1418 mem: 30.88MB (0.3%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 447.90MB (5.6%) command: firefox pid: 1885 cpu: 22.9%
2: mem: 73.18MB (0.9%) command: mate-panel pid: 1173 cpu: 0.2%
3: mem: 59.45MB (0.7%) command: Xorg pid: 937 cpu: 0.6%
4: mem: 47.80MB (0.6%) command: caja pid: 1194 cpu: 0.1%
5: mem: 36.47MB (0.4%) command: nm-applet pid: 1234 cpu: 0.2%
6: mem: 30.91MB (0.3%) command: mate-terminal pid: 1718 cpu: 0.0%
7: mem: 30.88MB (0.3%) command: marco pid: 1418 cpu: 0.1%
8: mem: 29.71MB (0.3%) command: applet.py (started by: python3) pid: 1246 cpu: 0.0%
9: mem: 27.00MB (0.3%) command: mate-volume-control-applet pid: 1249 cpu: 0.0%
10: mem: 25.30MB (0.3%) command: clock-applet pid: 1320 cpu: 0.0%
Info: Processes: 183 Uptime: 4 min Memory: 705.1/7877.0MB
Init: systemd v: 229 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.21
_______________________________ UEFI settings _________________________________
Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
None
_____________________________ md5sum of EFI files _____________________________
None
========================= Boot Information Details ============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location. It also
embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
(,msdos1)/boot/grub
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disque /dev/sda : 119,2 GiB, 128035676160 octets, 250069680 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 63,999,999 63,997,952 83 Linux
/dev/sda2 64,000,000 96,002,047 32,002,048 82 Linux swap / Solaris
/dev/sda3 96,002,048 250,068,991 154,066,944 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 3469309e-7446-477d-a3dd-0838334bcc26 ext4
/dev/sda2 e04aa42e-ed13-432c-b3a6-accef22b1b5e swap
/dev/sda3 910bf44f-0dca-40af-b5df-e5fb3748ec6b ext4
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 juin 13 23:35 ata-ADATA_SU800_2H1820010430 -> ../../sda
lrwxrwxrwx 1 root root 10 juin 13 23:35 ata-ADATA_SU800_2H1820010430-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 13 23:35 ata-ADATA_SU800_2H1820010430-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 13 23:35 ata-ADATA_SU800_2H1820010430-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 juin 13 23:35 ata-SlimtypeDVD_A_DA8A6SH_3508981_456619507087 -> ../../sr0
lrwxrwxrwx 1 root root 9 juin 13 23:35 wwn-0x5707c181004d2a34 -> ../../sda
lrwxrwxrwx 1 root root 10 juin 13 23:35 wwn-0x5707c181004d2a34-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin 13 23:35 wwn-0x5707c181004d2a34-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin 13 23:35 wwn-0x5707c181004d2a34-part3 -> ../../sda3
_________________________ "ls -R /dev/mapper/" output _________________________
None
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda3 /home ext4 (rw,relatime,data=ordered)
__________________________=== Boot Files Content ===___________________________
___________________________ sda1/boot/grub/grub.cfg: ___________________________
File size: 9619, Line count: 284, Menu entries (sub entries included) : 7
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3469309e-7446-477d-a3dd-0838334bcc26' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3469309e-7446-477d-a3dd-0838334bcc26
else
search --no-floppy --fs-uuid --set=root 3469309e-7446-477d-a3dd-0838334bcc26
fi
linux /boot/vmlinuz-4.4.0-79-generic root=UUID=3469309e-7446-477d-a3dd-0838334bcc26 ro acpi=off quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-79-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3469309e-7446-477d-a3dd-0838334bcc26
else
search --no-floppy --fs-uuid --set=root 3469309e-7446-477d-a3dd-0838334bcc26
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3469309e-7446-477d-a3dd-0838334bcc26
else
search --no-floppy --fs-uuid --set=root 3469309e-7446-477d-a3dd-0838334bcc26
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda1/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=3469309e-7446-477d-a3dd-0838334bcc26 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda3 during installation
UUID=910bf44f-0dca-40af-b5df-e5fb3748ec6b /home ext4 defaults 0 2
# swap was on /dev/sda2 during installation
UUID=e04aa42e-ed13-432c-b3a6-accef22b1b5e none swap sw 0 0
____________________________ sda1/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="acpi=off"
#GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.4.0-79-generic root=UUID=3469309e-7446-477d-a3dd-0838334bcc26 ro acpi=off quiet splash vt.handoff=7
______________________________ Boot-up Statistics ______________________________
Startup finished in 2.076s (kernel) + 12.296s (userspace) = 14.372s
blame, first 10:
NetworkManager-wait-online.service 11.176s
dev-sda1.device 580ms
systemd-backlight@backlight:intel_backlight.service 372ms
upower.service 284ms
NetworkManager.service 140ms
ModemManager.service 136ms
accounts-daemon.service 116ms
networking.service 108ms
grub-common.service 92ms
systemd-logind.service 88ms
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @12.292s
2 ├─ntp.service @12.264s +28ms
3 │ network-online.target @12.264s
4 │ NetworkManager-wait-online.service @1.088s +11.176s
5 │ NetworkManager.service @940ms +140ms
6 │ dbus.service @920ms
7 │ basic.target @916ms
8 │ sockets.target @916ms
9 │ snapd.socket @912ms +4ms
10 │ sysinit.target @912ms
11 │ apparmor.service @824ms +76ms
12 │ local-fs.target @812ms
13 │ run-user-1000-gvfs.mount @8.020s
14 │ run-user-1000.mount @6.372s
15 │ local-fs-pre.target @280ms
16 │ systemd-remount-fs.service @276ms +4ms
17 │ ├─systemd-journald.socket @120ms
18 │ │ ├─-.slice @112ms
19 │ │ -.mount @112ms
20 │ │ system.slice @120ms
21 │ │ -.slice @112ms
22 │ │ ...
23 │ system.slice @120ms
24 │ ...
25 multi-user.target @12.292s
26 ntp.service @12.264s +28ms
27 ...
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 7.7G 655M 6.5G 94M 587M 6.7G
Swap: 15G 0B 15G
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sda1 / ext4 30G 7.0G 22G 25% 14%
/dev/sda3 /home ext4 73G 9.8G 59G 15% 1%
Swap partition for hibernation : UUID=e04aa42e-ed13-432c-b3a6-accef22b1b5e
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13d3:3414 IMC Networks
Bus 001 Device 003: ID 04f2:b547 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 9: Dev 4, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 9: Dev 4, If 1, Class=Wireless, Driver=btusb, 12M
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
___________________________________ Modules Loaded ____________________________
Module Size Used by
ablk_helper 16384 1 aesni_intel
aesni_intel 167936 4
aes_x86_64 20480 1 aesni_intel
ahci 36864 3
ansi_cprng 16384 0
arc4 16384 2
autofs4 40960 2
bluetooth 520192 29 bnep,btbcm,btrtl,btusb,rfcomm,btintel
bnep 20480 2
btbcm 16384 1 btusb
btcoexist 53248 1 rtl8821ae
btintel 16384 1 btusb
btrfs 987136 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 2
cfg80211 565248 2 mac80211,rtlwifi
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 20480 3 ghash_clmulni_intel,aesni_intel,ablk_helper
ctr 16384 2
drbg 32768 1
drm 364544 5 ttm,i915_bpo,drm_kms_helper
drm_kms_helper 155648 1 i915_bpo
fb_sys_fops 16384 1 drm_kms_helper
gf128mul 16384 1 lrw
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 118784 3 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 1 i915_bpo
i915_bpo 1302528 3
input_leds 16384 0
int340x_thermal_zone 16384 1 processor_thermal_device
intel_ips 20480 1 i915_bpo
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_soc_dts_iosf 16384 1 processor_thermal_device
irqbypass 16384 1 kvm
jfs 180224 0
joydev 20480 0
kvm 544768 1 kvm_intel
kvm_intel 172032 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lrw 16384 1 aesni_intel
mac80211 737280 3 rtl_pci,rtlwifi,rtl8821ae
mac_hid 16384 0
media 24576 2 uvcvideo,videodev
mei 98304 1 mei_me
mei_me 36864 0
memstick 20480 1 rtsx_pci_ms
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
msr 16384 0
ntfs 98304 0
nvram 16384 0
parport 49152 3 lp,ppdev,parport_pc
parport_pc 32768 0
ppdev 20480 0
processor_thermal_device 16384 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
rfcomm 69632 2
rtl8821ae 225280 0
rtl_pci 28672 1 rtl8821ae
rtlwifi 77824 2 rtl_pci,rtl8821ae
rtsx_pci 53248 2 rtsx_pci_ms,rtsx_pci_sdmmc
rtsx_pci_ms 20480 0
rtsx_pci_sdmmc 24576 0
serio_raw 16384 0
shpchp 36864 0
snd 81920 17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec 135168 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 86016 1
snd_hda_core 73728 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel 40960 3
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
soundcore 16384 1 snd
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ttm 94208 0
ufs 73728 0
usbhid 49152 0
uvcvideo 90112 0
v4l2_common 16384 1 videobuf2_v4l2
video 40960 1 i915_bpo
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 176128 4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
x86_pkg_temp_thermal 16384 0
xfs 970752 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
model : GM107M [GeForce GTX 950M]
modalias : pci:v000010DEd0000139Asv00001043sd00001130bc03sc02i00
vendor : NVIDIA Corporation
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-375 - distro non-free recommended
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
variant: oss
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
None
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.4.0.79.85
linux-headers-4.4.0-21 4.4.0-21.37
linux-headers-4.4.0-21-generic 4.4.0-21.37
linux-headers-4.4.0-79 4.4.0-79.100
linux-headers-4.4.0-79-generic 4.4.0-79.100
linux-headers-generic 4.4.0.79.85
linux-image-4.4.0-21-generic 4.4.0-21.37
linux-image-4.4.0-79-generic 4.4.0-79.100
linux-image-extra-4.4.0-21-generic 4.4.0-21.37
linux-image-extra-4.4.0-79-generic 4.4.0-79.100
linux-image-generic 4.4.0.79.85
Files in /boot directory:
abi-4.4.0-21-generic
abi-4.4.0-79-generic
config-4.4.0-21-generic
config-4.4.0-79-generic
grub
initrd.img-4.4.0-21-generic
initrd.img-4.4.0-79-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-21-generic
System.map-4.4.0-79-generic
vmlinuz-4.4.0-21-generic
vmlinuz-4.4.0-79-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.244000] SCSI subsystem initialized
[ 0.872037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.876037] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
[ 1.180056] scsi host0: ahci
[ 1.180056] scsi host1: ahci
[ 1.508077] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.508077] scsi 0:0:0:0: Direct-Access ATA ADATA SU800 5A PQ: 0 ANSI: 5
[ 1.508077] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.508077] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.508077] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.508077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.516077] scsi 1:0:0:0: CD-ROM Slimtype DVD A DA8A6SH GAA2 PQ: 0 ANSI: 5
[ 1.536079] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.536079] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.536079] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.356130] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.516140] rtl8821ae: Using firmware rtlwifi/rtl8821aefw.bin
[ 2.516140] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[ 3.448198] Bluetooth: hci0: rom_version status=0 version=1
[ 9.848598] wlp2s0: RX AssocResp from 24:05:0f:6d:c1:63 (capab=0x411 status=0 aid=3)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=6 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=7 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=8 [slave keyboard (3)]
↳ USB2.0 VGA UVC WebCam id=9 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 1600 x 900, maximum 32767 x 32767
eDP1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.00 + 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1600x900 60.00*
1280x1024 60.02
1440x900 59.89
1280x960 60.00
1368x768 60.00
1360x768 59.80 59.96
1152x864 60.00
1280x720 60.00
1024x768 60.00
1024x576 60.00
960x540 60.00
800x600 60.32 56.25
864x486 60.00
640x480 59.94
720x405 60.00
640x360 60.00
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.180] (==) No Layout section. Using the first Screen section.
[ 3.180] (==) No screen section available. Using defaults.
[ 3.180] (**) |-->Screen "Default Screen Section" (0)
[ 3.180] (**) | |-->Monitor "<default monitor>"
[ 3.184] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.184] (--) PCI:*(0:0:2:0) 8086:191b:1043:1130 rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 3.184] (--) PCI: (0:1:0:0) 10de:139a:1043:1130 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.184] (II) LoadModule: "glx"
[ 3.184] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.196] (II) LoadModule: "intel"
[ 3.196] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.200] (II) LoadModule: "modesetting"
[ 3.200] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3.200] (II) LoadModule: "fbdev"
[ 3.200] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3.200] (II) LoadModule: "vesa"
[ 3.200] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3.200] (WW) Falling back to old probe method for modesetting
[ 3.200] (WW) Falling back to old probe method for fbdev
[ 3.200] (II) Loading sub module "fbdevhw"
[ 3.200] (II) LoadModule: "fbdevhw"
[ 3.200] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3.200] (WW) Falling back to old probe method for vesa
[ 3.204] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.204] (II) intel(0): Output eDP1 has no monitor section
[ 3.220] (II) intel(0): Output HDMI1 has no monitor section
[ 3.220] (II) intel(0): Output DP1 has no monitor section
[ 3.220] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.220] (II) Loading sub module "dri2"
[ 3.220] (II) LoadModule: "dri2"
[ 3.220] (II) Loading sub module "present"
[ 3.220] (II) LoadModule: "present"
[ 3.220] (II) UnloadModule: "modesetting"
[ 3.220] (II) UnloadModule: "fbdev"
[ 3.220] (II) UnloadModule: "vesa"
[ 3.244] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.248] (II) intel(0): Setting screen physical size to 508 x 285
[ 3.272] (II) LoadModule: "evdev"
[ 3.272] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.328] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 3.472] (WW) config/udev: device Logitech USB Receiver already added. Ignoring.
[ 3.472] (WW) config/udev: device Logitech USB Receiver already added. Ignoring.
[ 3.484] (WW) Option "xkb_options" requires a string value
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-79-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-79-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:191b
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:139a
BusID "PCI:1@0:0:0"
Is boot vga? no
Error: can't access /sys/bus/pci/devices/0000:01:00.0/driver
The device is not bound to any driver. Skipping...
Skipping "/dev/dri/card0", driven by "i915_bpo"
Skipping "/dev/dri/card0", driven by "i915_bpo"
Skipping "/dev/dri/card0", driven by "i915_bpo"
Found "/dev/dri/card0", driven by "i915_bpo"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-79-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ADATA SU800
LU WWN Device Id: 5 707c18 1004d2a34
Firmware Version: Q0125A
User Capacity: 128 035 676 160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jun 13 23:39:19 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
9 Power_On_Hours ------ 100 100 000 - 32
12 Power_Cycle_Count ------ 100 100 000 - 104
160 Unknown_Attribute ------ 100 100 000 - 0
161 Unknown_Attribute ------ 100 100 000 - 36
163 Unknown_Attribute ------ 100 100 000 - 9
164 Unknown_Attribute ------ 100 100 000 - 2993
165 Unknown_Attribute ------ 100 100 000 - 16
166 Unknown_Attribute ------ 100 100 000 - 3
167 Unknown_Attribute ------ 100 100 000 - 5
148 Unknown_Attribute ------ 100 100 000 - 2099
149 Unknown_Attribute ------ 100 100 000 - 87
150 Unknown_Attribute ------ 100 100 000 - 1
151 Unknown_Attribute ------ 100 100 000 - 61
168 Unknown_Attribute ------ 100 100 000 - 1500
169 Unknown_Attribute ------ 100 100 000 - 100
177 Wear_Leveling_Count ------ 100 100 050 - 0
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
187 Reported_Uncorrect ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 27
194 Temperature_Celsius ------ 100 100 000 - 35
196 Reallocated_Event_Count ------ 100 100 016 - 0
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
225 Unknown_SSD_Attribute PO---- 100 100 000 - 6116
232 Available_Reservd_Space ------ 100 100 000 - 100
241 Total_LBAs_Written ------ 100 100 000 - 6116
242 Total_LBAs_Read ------ 100 100 000 - 5392
245 Unknown_Attribute ------ 100 100 000 - 23944
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedOn y voit effectivement que tu avais utilisé le paramètre de noyau "acpi=off" dans cette ligne extraite de la partie "sda1/etc/default/grub" :
GRUB_CMDLINE_LINUX="acpi=off"Ce qui est confirmé dans cet autre extrait :
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.4.0-79-generic root=UUID=3469309e-7446-477d-a3dd-0838334bcc26 ro acpi=off quiet splash vt.handoff=7Je ne sais pas t'aider à sortir de l'ornière. Je suis convaincu que c'est un souci d'affichage et en principe l'installation du pilote propriétaire aurait dû permettre de résoudre ça.
Hors ligne