Pages : 1
#1 Le 25/01/2015, à 11:37
- dz50
[Résolu] Temps démarrage PC trop long.
Bonjour,
Je suis en train de préparer un PC pas récent (détails ci-dessous).
J'ai installé Windows 7 pro et Voyager 14.04LTS "xubuntu". Le problème, après mise en marche :
- 25 secondes avant affichage du Grub.
- après lancement de Voyager, 60 secondes écoulées avant de pouvoir l'utiliser. J'ai réduis le démarrage automatique des applis au minimum. Sur mes autres machines, les délais sont bien plus courts. Je suppose que les délais sont liés au réglages de la machine, peut-on agir ?
Par avance, merci pour votre aide.
System: Host: top-desktop Kernel: 3.13.0-45-generic x86_64 (64 bit) Desktop: Xfce 4.11.8 Distro: Ubuntu 14.04 trusty
Machine: Mobo: ASRock model: G41M-VS3. Bios: American Megatrends version: P1.50 date: 07/08/2011
CPU: Quad core Intel Core2 Quad CPU Q6600 (-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 ssse3 vmx)
Clock Speeds: 1: 2394.065 MHz 2: 2394.065 MHz 3: 2394.065 MHz 4: 2394.065 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV635 [Radeon HD 3650/3750/4570/4580]
X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1680x1050@60.0hz
GLX Renderer: Gallium 0.4 on AMD RV635 GLX Version: 3.0 Mesa 10.1.3
Audio: Card-1: Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
Card-2: Advanced Micro Devices [AMD/ATI] RV635 HDMI Audio [Radeon HD 3600 Series] driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.13.0-45-generic
Network: Card-1: Qualcomm Atheros AR8152 v2.0 Fast Ethernet driver: atl1c
IF: eth1 state: up speed: 100 Mbps duplex: full mac: 00:25:22:f8:76:b0
Card-2: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter driver: 8139too
IF: eth0 state: down mac: 00:08:a1:3d:92:4c
Drives: HDD Total Size: 400.1GB (1.5% used) 1: id: /dev/sda model: WDC_WD3200AAJS size: 320.1GB
2: USB id: /dev/sdb model: Storage_Device size: 80.1GB
Partition: ID: / size: 11G used: 5.5G (56%) fs: ext4 ID: /home size: 86G used: 162M (1%) fs: ext4
ID: swap-1 size: 5.24GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 33.0C mobo: N/A gpu: 59.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 196 Uptime: 4 min Memory: 564.8/3950.7MB Client: Shell (xfce4-terminal) inxi: 1.9.17 Dernière modification par dz50 (Le 26/01/2015, à 08:06)
Hors ligne
#2 Le 25/01/2015, à 11:50
- alca94
Re : [Résolu] Temps démarrage PC trop long.
bonjour
malheureusement je ne vais pas pouvoir vous aider par contre pourriez vous m'indiquez la commande pour avoir ce résultat dans le terminal ?
POUR METTRE LES RETOURS DU "TERMINAL" voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641
Hors ligne
#3 Le 25/01/2015, à 13:29
- dz50
Re : [Résolu] Temps démarrage PC trop long.
Le résultat ne provient pas d'une commande dans le terminal, mais à partir d'un lanceur "Launcher-39", installé par Rodofr sur le tableau de bord. Comment en retrouver la cde ???
Hors ligne
#4 Le 25/01/2015, à 16:47
- metalux
Re : [Résolu] Temps démarrage PC trop long.
Bonjour,
@alca94, il s'agit du paquet inxi. Le résultat donné est issu de la commande inxi -F
@dz50,
Comment en retrouver la cde ???
Tu regardes les propriétés de l'applet à partir d'un clic droit et tu retrouveras le chemin complet vers le script (dossier caché .scripts). Ensuite ouvre le script avec mousepad et regarde le contenu, tu retrouveras les programmes lancés.
Dernière modification par metalux (Le 25/01/2015, à 16:58)
Hors ligne
#5 Le 25/01/2015, à 17:01
- alca94
Re : [Résolu] Temps démarrage PC trop long.
@ metalux
merci de la précision ,je trouve ça bien et complet comme commande
POUR METTRE LES RETOURS DU "TERMINAL" voir les explications sur ce post
https://forum.ubuntu-fr.org/viewtopic.p … #p17345641
Hors ligne
#6 Le 25/01/2015, à 17:32
- dz50
Re : [Résolu] Temps démarrage PC trop long.
Merci @ metalux
@ alca94
Pour info le scripts :
[Desktop Entry]
Version=1.0
Type=Application
Name=Infos
Comment=
Exec=sh -c "~/.scripts/Wall/wall11infos %f"
Icon=/.awn1/diagnostic.svg
Path=
Terminal=false
StartupNotify=falseEt la cde du lanceur:
sh -c "~/.scripts/Wall/wall11infos %f"Dernière modification par dz50 (Le 09/02/2015, à 05:48)
Hors ligne
#7 Le 25/01/2015, à 17:47
- metalux
Re : [Résolu] Temps démarrage PC trop long.
Non, non, il ne s'agit pas du script mais du lanceur. inxi -F est suffisant pour l'utiliser sur Ubuntu.
Le script se trouve là dz50: ~/.scripts/Wall/wall11infos
Hors ligne
#8 Le 25/01/2015, à 18:07
- nam1962
Re : [Résolu] Temps démarrage PC trop long.
@dz50 - pour pouvoir voir ou ça bloque, redémarre et juste après lance
dmesget donne nous le retour.
[ Modéré ]
Hors ligne
#9 Le 25/01/2015, à 18:26
- dz50
Re : [Résolu] Temps démarrage PC trop long.
@ nam1962
Voici le retour.
Pour info, après l'install, j'ai optimisé en suivant ton tuto.
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./G41M-VS3., BIOS P1.50 07/08/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x124000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FFC000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 4608MB, range: 64MB, type WB
[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 4, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 4, base: 4608MB, range: 64MB, type WB
[ 0.000000] e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdbf80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x123e00000-0x123ffffff]
[ 0.000000] [mem 0x123e00000-0x123ffffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x123dfffff]
[ 0.000000] [mem 0x120000000-0x123dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdbf7ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdbdfffff] page 2M
[ 0.000000] [mem 0xdbe00000-0xdbf7ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x34b44000-0x36599fff]
[ 0.000000] ACPI: RSDP 00000000000f94b0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dbf80000 00003C (v01 070811 RSDT1145 20110708 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dbf80200 000084 (v01 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dbf80440 005739 (v01 AS288 AS288150 00000150 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dbf90000 000040
[ 0.000000] ACPI: APIC 00000000dbf80390 00006C (v01 070811 APIC1145 20110708 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dbf80400 00003C (v01 070811 OEMMCFG 20110708 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dbf90040 000072 (v01 070811 OEMB1145 20110708 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000dbf88440 000027 (v01 070811 OEMAAFT 20110708 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000dbf900c0 002024 (v01 070811 GMCHSCI 20110708 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000123ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x123ffffff]
[ 0.000000] NODE_DATA [mem 0x123ff7000-0x123ffbfff]
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88011f400000-ffff8801235fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x123ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00096fff]
[ 0.000000] node 0: [mem 0x00100000-0xdbf7ffff]
[ 0.000000] node 0: [mem 0x100000000-0x123ffffff]
[ 0.000000] On node 0 totalpages: 1048342
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3990 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14014 pages used for memmap
[ 0.000000] DMA32 zone: 896896 pages, LIFO batch:31
[ 0.000000] Normal zone: 2304 pages used for memmap
[ 0.000000] Normal zone: 147456 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbf80000-0xdbf8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbf90000-0xdbfdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbfe0000-0xdbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xdc000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880123c00000 s82368 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031939
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=7dc90e07-658b-4ecf-9b85-9a4609a8a779 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4015664K/4193368K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 177704K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 17301504 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] tsc: Detected 2394.045 MHz processor
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.09 BogoMIPS (lpj=9576180)
[ 0.008008] pid_max: default: 32768 minimum: 301
[ 0.008054] Security Framework initialized
[ 0.008081] AppArmor: AppArmor initialized
[ 0.008083] Yama: becoming mindful.
[ 0.008582] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013490] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014537] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014549] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014913] Initializing cgroup subsys memory
[ 0.014924] Initializing cgroup subsys devices
[ 0.014927] Initializing cgroup subsys freezer
[ 0.014930] Initializing cgroup subsys blkio
[ 0.014933] Initializing cgroup subsys perf_event
[ 0.014936] Initializing cgroup subsys hugetlb
[ 0.014966] CPU: Physical Processor ID: 0
[ 0.014968] CPU: Processor Core ID: 0
[ 0.014970] mce: CPU supports 6 MCE banks
[ 0.014980] CPU0: Thermal monitoring enabled (TM2)
[ 0.014989] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.014989] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.014989] tlb_flushall_shift: -1
[ 0.015110] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.017003] ACPI: Core revision 20131115
[ 0.019662] ACPI: All ACPI Tables successfully acquired
[ 0.020014] ftrace: allocating 28554 entries in 112 pages
[ 0.032472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073013] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.076000] ... version: 2
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 2
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 000000007fffffff
[ 0.076000] ... fixed-purpose events: 3
[ 0.076000] ... event mask: 0000000700000003
[ 0.076000] x86: Booting SMP configuration:
[ 0.076000] CPU1 microcode updated early to revision 0xba, date = 2010-10-03
[ 0.090435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.090449] CPU2 microcode updated early to revision 0xba, date = 2010-10-03
[ 0.110446] CPU3 microcode updated early to revision 0xba, date = 2010-10-03
[ 0.076000] .... node #0, CPUs: #1 #2 #3
[ 0.130135] x86: Booted up 1 node, 4 CPUs
[ 0.130140] smpboot: Total of 4 processors activated (19152.36 BogoMIPS)
[ 0.132197] devtmpfs: initialized
[ 0.139986] EVM: security.selinux
[ 0.139988] EVM: security.SMACK64
[ 0.139990] EVM: security.ima
[ 0.139992] EVM: security.capability
[ 0.140038] PM: Registering ACPI NVS region [mem 0xdbf90000-0xdbfdffff] (327680 bytes)
[ 0.141384] pinctrl core: initialized pinctrl subsystem
[ 0.141469] regulator-dummy: no parameters
[ 0.141504] RTC time: 18:21:13, date: 01/25/15
[ 0.141554] NET: Registered protocol family 16
[ 0.141709] cpuidle: using governor ladder
[ 0.141711] cpuidle: using governor menu
[ 0.141760] ACPI: bus type PCI registered
[ 0.141763] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.141841] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.141844] PCI: not using MMCONFIG
[ 0.141846] PCI: Using configuration type 1 for base access
[ 0.143115] bio: create slab <bio-0> at 0
[ 0.143115] ACPI: Added _OSI(Module Device)
[ 0.143115] ACPI: Added _OSI(Processor Device)
[ 0.143115] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143115] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.145759] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.147988] ACPI: Interpreter enabled
[ 0.147999] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.148018] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.148020] ACPI: Using IOAPIC for interrupt routing
[ 0.148045] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.149298] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.155503] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.155622] ACPI: No dock devices found.
[ 0.162368] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.162376] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.162562] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[ 0.162735] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.162895] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.163080] PCI host bridge to bus 0000:00
[ 0.163084] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.163087] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.163090] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.163093] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.163095] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.163098] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xefffffff]
[ 0.163101] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
[ 0.163112] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[ 0.163135] DMAR: Forcing write-buffer flush capability
[ 0.163136] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.163225] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[ 0.163271] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.163321] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.163394] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.163412] pci 0000:00:1b.0: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[ 0.163481] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.163567] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.163638] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.163691] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.163732] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.163803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.163859] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.163901] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.163942] pci 0000:00:1d.0: reg 0x20: [io 0xb480-0xb49f]
[ 0.164026] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.164066] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.164108] pci 0000:00:1d.1: reg 0x20: [io 0xb800-0xb81f]
[ 0.164188] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.164227] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.164268] pci 0000:00:1d.2: reg 0x20: [io 0xb880-0xb89f]
[ 0.164348] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.164386] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.164427] pci 0000:00:1d.3: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.164507] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.164557] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.164577] pci 0000:00:1d.7: reg 0x10: [mem 0xfe8fbc00-0xfe8fbfff]
[ 0.164660] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.164712] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.164752] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.164846] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.164889] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.164972] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.164980] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.164986] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.164990] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
[ 0.165096] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.165110] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.165120] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.165130] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
[ 0.165140] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
[ 0.165150] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.165248] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.165263] pci 0000:00:1f.2: reg 0x10: [io 0xb400-0xb407]
[ 0.165271] pci 0000:00:1f.2: reg 0x14: [io 0xb080-0xb083]
[ 0.165280] pci 0000:00:1f.2: reg 0x18: [io 0xb000-0xb007]
[ 0.165289] pci 0000:00:1f.2: reg 0x1c: [io 0xac00-0xac03]
[ 0.165298] pci 0000:00:1f.2: reg 0x20: [io 0xa880-0xa88f]
[ 0.165334] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.165416] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.165468] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.165613] pci 0000:04:00.0: [1002:9598] type 00 class 0x030000
[ 0.165629] pci 0000:04:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.165641] pci 0000:04:00.0: reg 0x18: [mem 0xfebe0000-0xfebeffff 64bit]
[ 0.165650] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.165665] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.165699] pci 0000:04:00.0: supports D1 D2
[ 0.165747] pci 0000:04:00.1: [1002:aa20] type 00 class 0x040300
[ 0.165762] pci 0000:04:00.1: reg 0x10: [mem 0xfebfc000-0xfebfffff 64bit]
[ 0.165825] pci 0000:04:00.1: supports D1 D2
[ 0.165880] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.165884] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.165888] pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.165893] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.165950] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.165960] pci 0000:00:1c.0: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.166034] pci 0000:01:00.0: [1969:2062] type 00 class 0x020000
[ 0.166059] pci 0000:01:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[ 0.166072] pci 0000:01:00.0: reg 0x18: [io 0xcc00-0xcc7f]
[ 0.166178] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172018] pci 0000:00:1c.1: PCI bridge to [bus 01]
[ 0.172023] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
[ 0.172028] pci 0000:00:1c.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.172080] pci 0000:03:02.0: [10ec:8139] type 00 class 0x020000
[ 0.172098] pci 0000:03:02.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.172110] pci 0000:03:02.0: reg 0x14: [mem 0xfeaffc00-0xfeaffcff]
[ 0.172179] pci 0000:03:02.0: supports D1 D2
[ 0.172182] pci 0000:03:02.0: PME# supported from D1 D2 D3hot
[ 0.172259] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.172264] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.172269] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.172275] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.172278] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.172281] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.172284] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.172286] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xefffffff] (subtractive decode)
[ 0.172289] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.172923] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.172992] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.173059] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.173126] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.173192] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.173259] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.173326] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.173393] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.173507] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.173515] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.173557] Found 1 acpi root devices
[ 0.173651] vgaarb: setting as boot device: PCI:0000:04:00.0
[ 0.173651] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173651] vgaarb: loaded
[ 0.173651] vgaarb: bridge control possible 0000:04:00.0
[ 0.173651] SCSI subsystem initialized
[ 0.173651] libata version 3.00 loaded.
[ 0.173651] ACPI: bus type USB registered
[ 0.173651] usbcore: registered new interface driver usbfs
[ 0.173651] usbcore: registered new interface driver hub
[ 0.173651] usbcore: registered new device driver usb
[ 0.173651] PCI: Using ACPI for IRQ routing
[ 0.173651] PCI: pci_cache_line_size set to 64 bytes
[ 0.173651] e820: reserve RAM buffer [mem 0x00097800-0x0009ffff]
[ 0.173651] e820: reserve RAM buffer [mem 0xdbf80000-0xdbffffff]
[ 0.173651] NetLabel: Initializing
[ 0.173651] NetLabel: domain hash size = 128
[ 0.173651] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.173651] NetLabel: unlabeled traffic allowed by default
[ 0.176008] hpet clockevent registered
[ 0.176012] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.176016] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.176021] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.178040] Switched to clocksource hpet
[ 0.183696] AppArmor: AppArmor Filesystem Enabled
[ 0.183734] pnp: PnP ACPI init
[ 0.183752] ACPI: bus type PNP registered
[ 0.183848] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.183852] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.183857] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.183910] pnp 00:01: [dma 4]
[ 0.183935] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.183984] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.184030] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.184066] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.184405] pnp 00:05: [dma 3]
[ 0.184539] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.184682] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.184686] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.184690] system 00:06: [io 0x0480-0x04bf] has been reserved
[ 0.184693] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.184699] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.184702] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.184706] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184815] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.184892] system 00:08: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.184896] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185017] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.185021] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.185025] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185099] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.185178] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.185404] pnp 00:0c: [dma 0 disabled]
[ 0.185479] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.185608] system 00:0d: [io 0x0280-0x028f] has been reserved
[ 0.185612] system 00:0d: [io 0x0290-0x029f] has been reserved
[ 0.185616] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185684] system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.185688] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185903] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.185907] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.185910] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.185913] system 00:0f: [mem 0x00100000-0xdbffffff] could not be reserved
[ 0.185917] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.186061] pnp: PnP ACPI: found 16 devices
[ 0.186064] ACPI: bus type PNP unregistered
[ 0.193248] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.193253] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 400000
[ 0.193263] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.193275] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.193279] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.193283] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.193286] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.193292] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdc000000-0xdc3fffff]
[ 0.193296] pci 0000:00:1c.1: BAR 15: assigned [mem 0xdc400000-0xdc5fffff 64bit pref]
[ 0.193299] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.193304] pci 0000:04:00.0: BAR 6: assigned [mem 0xfeb00000-0xfeb1ffff pref]
[ 0.193308] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.193311] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.193315] pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.193319] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.193324] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.193327] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.193333] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xdc3fffff]
[ 0.193337] pci 0000:00:1c.0: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.193343] pci 0000:00:1c.1: PCI bridge to [bus 01]
[ 0.193347] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
[ 0.193352] pci 0000:00:1c.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.193357] pci 0000:00:1c.1: bridge window [mem 0xdc400000-0xdc5fffff 64bit pref]
[ 0.193363] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.193367] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.193372] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.193381] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.193383] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.193386] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.193389] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.193392] pci_bus 0000:00: resource 8 [mem 0xdc000000-0xefffffff]
[ 0.193394] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff]
[ 0.193397] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.193400] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.193403] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.193405] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.193408] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc3fffff]
[ 0.193411] pci_bus 0000:02: resource 2 [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.193414] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.193416] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.193419] pci_bus 0000:01: resource 2 [mem 0xdc400000-0xdc5fffff 64bit pref]
[ 0.193422] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.193425] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.193427] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.193430] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.193433] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.193435] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.193438] pci_bus 0000:03: resource 8 [mem 0xdc000000-0xefffffff]
[ 0.193441] pci_bus 0000:03: resource 9 [mem 0xf4000000-0xffffffff]
[ 0.193482] NET: Registered protocol family 2
[ 0.193738] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.193891] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.194082] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.194125] TCP: reno registered
[ 0.194136] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.194168] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.194259] NET: Registered protocol family 1
[ 0.194977] pci 0000:04:00.0: Video device with shadowed ROM
[ 0.194989] PCI: CLS 32 bytes, default 64
[ 0.195071] Trying to unpack rootfs image as initramfs...
[ 0.814764] Freeing initrd memory: 26968K (ffff880034b44000 - ffff88003659a000)
[ 0.814774] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.814777] software IO TLB [mem 0xd7f80000-0xdbf80000] (64MB) mapped at [ffff8800d7f80000-ffff8800dbf7ffff]
[ 0.815121] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xba
[ 0.815126] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xba
[ 0.815139] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xba
[ 0.815150] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xba
[ 0.815225] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.815228] Scanning for low memory corruption every 60 seconds
[ 0.815515] Initialise system trusted keyring
[ 0.815586] audit: initializing netlink socket (disabled)
[ 0.815606] type=2000 audit(1422210073.812:1): initialized
[ 0.854081] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.855614] zbud: loaded
[ 0.855794] VFS: Disk quotas dquot_6.5.2
[ 0.855849] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.856462] fuse init (API version 7.22)
[ 0.856558] msgmni has been set to 7895
[ 0.856626] Key type big_key registered
[ 0.857137] Key type asymmetric registered
[ 0.857140] Asymmetric key parser 'x509' registered
[ 0.857180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.857227] io scheduler noop registered
[ 0.857229] io scheduler deadline registered (default)
[ 0.857260] io scheduler cfq registered
[ 0.857482] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.857548] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.857633] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.857786] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.857886] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.857889] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.857892] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
[ 0.857896] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.857918] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.857923] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.857943] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.857946] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.857950] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.857967] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.857989] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.858036] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.858038] vesafb: scrolling: redraw
[ 0.858040] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.858647] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 5824k, total 5824k
[ 0.908959] Console: switching to colour frame buffer device 175x65
[ 0.958921] fb0: VESA VGA frame buffer device
[ 0.958942] intel_idle: does not run on family 6 model 15
[ 0.958950] ipmi message handler version 39.2
[ 0.959040] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.959046] ACPI: Power Button [PWRB]
[ 0.959091] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.959094] ACPI: Power Button [PWRF]
[ 0.959266] GHES: HEST is not enabled!
[ 0.959375] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.979777] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.981365] Linux agpgart interface v0.103
[ 0.983135] brd: module loaded
[ 0.984039] loop: module loaded
[ 0.984171] ata_piix 0000:00:1f.1: version 2.13
[ 0.985286] scsi0 : ata_piix
[ 0.985365] scsi1 : ata_piix
[ 0.985403] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.985406] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.985496] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.986636] scsi2 : ata_piix
[ 0.986707] scsi3 : ata_piix
[ 0.986746] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19
[ 0.986748] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19
[ 0.987107] libphy: Fixed MDIO Bus: probed
[ 0.987223] tun: Universal TUN/TAP device driver, 1.6
[ 0.987225] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.987278] PPP generic driver version 2.4.2
[ 0.987327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.987332] ehci-pci: EHCI PCI platform driver
[ 0.987438] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.987449] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.987463] ehci-pci 0000:00:1d.7: debug port 1
[ 0.991357] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.991373] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe8fbc00
[ 1.000016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.000075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.000079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000081] usb usb1: Product: EHCI Host Controller
[ 1.000084] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 1.000087] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.000210] hub 1-0:1.0: USB hub found
[ 1.000219] hub 1-0:1.0: 8 ports detected
[ 1.000406] ehci-platform: EHCI generic platform driver
[ 1.000416] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.000419] ohci-pci: OHCI PCI platform driver
[ 1.000430] ohci-platform: OHCI generic platform driver
[ 1.000438] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.000524] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.000531] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.000557] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 1.000609] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.000612] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000615] usb usb2: Product: UHCI Host Controller
[ 1.000618] usb usb2: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.000620] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.000731] hub 2-0:1.0: USB hub found
[ 1.000740] hub 2-0:1.0: 2 ports detected
[ 1.000902] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.000910] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.000933] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 1.000985] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.000989] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000991] usb usb3: Product: UHCI Host Controller
[ 1.000994] usb usb3: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.000997] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.001096] hub 3-0:1.0: USB hub found
[ 1.001105] hub 3-0:1.0: 2 ports detected
[ 1.001261] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.001268] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.001300] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 1.001353] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.001356] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.001359] usb usb4: Product: UHCI Host Controller
[ 1.001362] usb usb4: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.001364] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.001462] hub 4-0:1.0: USB hub found
[ 1.001470] hub 4-0:1.0: 2 ports detected
[ 1.001628] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.001635] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.001667] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 1.001718] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.001721] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.001724] usb usb5: Product: UHCI Host Controller
[ 1.001726] usb usb5: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.001729] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.001828] hub 5-0:1.0: USB hub found
[ 1.001837] hub 5-0:1.0: 2 ports detected
[ 1.001999] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.004700] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.004708] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.004862] mousedev: PS/2 mouse device common for all mice
[ 1.005004] rtc_cmos 00:02: RTC can wake from S4
[ 1.005123] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.005148] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.005235] device-mapper: uevent: version 1.0.3
[ 1.005316] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.005324] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.005461] TCP: cubic registered
[ 1.005593] NET: Registered protocol family 10
[ 1.005807] NET: Registered protocol family 17
[ 1.005819] Key type dns_resolver registered
[ 1.006096] Loading compiled-in X.509 certificates
[ 1.007514] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
[ 1.007529] registered taskstats version 1
[ 1.010268] Key type trusted registered
[ 1.012462] Key type encrypted registered
[ 1.014662] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.014665] IMA: No TPM chip found, activating TPM-bypass!
[ 1.014914] regulator-dummy: disabling
[ 1.014971] Magic number: 15:579:393
[ 1.015086] rtc_cmos 00:02: setting system clock to 2015-01-25 18:21:14 UTC (1422210074)
[ 1.015169] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.015170] EDD information not available.
[ 1.015205] PM: Hibernation image not present or could not be loaded.
[ 1.028191] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.140347] ata4.01: NODEV after polling detection
[ 1.148131] ata4.00: ATAPI: HL-DT-ST DVDRAM_GH15N, 1.00, max UDMA/100
[ 1.151375] ata3.00: ATA-8: WDC WD3200AAJS-22B4A0, 01.03A01, max UDMA/133
[ 1.151378] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.164127] ata4.00: configured for UDMA/100
[ 1.164891] ata3.00: configured for UDMA/133
[ 1.165017] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-2 01.0 PQ: 0 ANSI: 5
[ 1.165162] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.165198] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.165213] sd 2:0:0:0: [sda] Write Protect is off
[ 1.165217] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.165241] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.169383] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM_GH15N 1.00 PQ: 0 ANSI: 5
[ 1.174432] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.174435] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.174536] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.174608] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.242085] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.242565] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.244484] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 1.244487] Write protecting the kernel read-only data: 12288k
[ 1.247536] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 1.250136] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 1.267962] systemd-udevd[124]: starting version 204
[ 1.297333] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.297459] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.298829] [drm] Initialized drm 1.1.0 20060810
[ 1.300300] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.301041] 8139too 0000:03:02.0 eth0: RealTek RTL8139 at 0x000000000001d800, 00:08:a1:3d:92:4c, IRQ 23
[ 1.312042] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.325277] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[ 1.340529] [drm] radeon kernel modesetting enabled.
[ 1.340712] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[ 1.340715] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 1.340737] Console: switching to colour dummy device 80x25
[ 1.342163] [drm] initializing kernel modesetting (RV635 0x1002:0x9598 0x174B:0xE410).
[ 1.342183] [drm] register mmio base: 0xFEBE0000
[ 1.342185] [drm] register mmio size: 65536
[ 1.342305] ATOM BIOS: 113
[ 1.342328] radeon 0000:04:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 1.342332] radeon 0000:04:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 1.342334] [drm] Detected VRAM RAM=512M, BAR=256M
[ 1.342336] [drm] RAM width 128bits DDR
[ 1.342421] [TTM] Zone kernel: Available graphics memory: 2022742 kiB
[ 1.342424] [TTM] Initializing pool allocator
[ 1.342430] [TTM] Initializing DMA pool allocator
[ 1.342451] [drm] radeon: 512M of VRAM memory ready
[ 1.342453] [drm] radeon: 512M of GTT memory ready.
[ 1.342477] [drm] Loading RV635 Microcode
[ 1.342550] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.353677] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 1.353718] radeon 0000:04:00.0: WB enabled
[ 1.353722] radeon 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88003658dc00
[ 1.353726] radeon 0000:04:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88003658dc0c
[ 1.353728] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.353730] [drm] Driver supports precise vblank timestamp query.
[ 1.353733] radeon 0000:04:00.0: radeon: MSI limited to 32-bit
[ 1.353759] radeon 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1.353773] radeon 0000:04:00.0: radeon: using MSI.
[ 1.353800] [drm] radeon: irq initialized.
[ 1.385320] [drm] ring test on 0 succeeded in 1 usecs
[ 1.385327] [drm] ring test on 3 succeeded in 2 usecs
[ 1.385788] [drm] Enabling audio 0 support
[ 1.385808] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.385822] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.386173] [drm] Radeon Display Connectors
[ 1.386175] [drm] Connector 0:
[ 1.386177] [drm] DVI-I-1
[ 1.386178] [drm] HPD1
[ 1.386181] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 1.386182] [drm] Encoders:
[ 1.386184] [drm] DFP1: INTERNAL_UNIPHY
[ 1.386185] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.386187] [drm] Connector 1:
[ 1.386189] [drm] VGA-1
[ 1.386191] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 1.386192] [drm] Encoders:
[ 1.386194] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.386195] [drm] Connector 2:
[ 1.386197] [drm] DIN-1
[ 1.386198] [drm] Encoders:
[ 1.386200] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 1.386228] [drm] Internal thermal controller with fan control
[ 1.386268] [drm] radeon: power management initialized
[ 1.439606] [drm] fb mappable at 0xE0141000
[ 1.439609] [drm] vram apper at 0xE0000000
[ 1.439611] [drm] size 7299072
[ 1.439613] [drm] fb depth is 24
[ 1.439615] [drm] pitch is 6912
[ 1.439686] fbcon: radeondrmfb (fb0) is primary device
[ 1.450933] usb 1-3: New USB device found, idVendor=0402, idProduct=5642
[ 1.450935] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1.450937] usb 1-3: Product: USB 2.0 Storage Device
[ 1.450939] usb 1-3: SerialNumber: 12345678901234567890
[ 1.472834] Console: switching to colour frame buffer device 210x65
[ 1.478620] radeon 0000:04:00.0: fb0: radeondrmfb frame buffer device
[ 1.478623] radeon 0000:04:00.0: registered panic notifier
[ 1.478630] [drm] Initialized radeon 2.36.0 20080528 for 0000:04:00.0 on minor 0
[ 1.560035] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 1.734896] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 1.812018] tsc: Refined TSC clocksource calibration: 2394.044 MHz
[ 2.103081] usb 1-5: New USB device found, idVendor=0bda, idProduct=0151
[ 2.103085] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.103088] usb 1-5: Product: USB2.0-CRW
[ 2.103091] usb 1-5: Manufacturer: Generic
[ 2.103093] usb 1-5: SerialNumber: 20060413092100000
[ 2.108730] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 2.108832] scsi4 : usb-storage 1-3:1.0
[ 2.108922] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 2.108992] scsi5 : usb-storage 1-5:1.0
[ 2.109065] usbcore: registered new interface driver usb-storage
[ 2.485166] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 2.812124] Switched to clocksource tsc
[ 3.008766] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.109390] scsi 4:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 3.109678] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.114627] scsi 5:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 3.119249] sd 4:0:0:0: [sdb] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.119989] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.119993] sd 4:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 3.120618] sd 4:0:0:0: [sdb] No Caching mode page found
[ 3.120622] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.120881] scsi 5:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 3.127380] scsi 5:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 3.131617] sd 4:0:0:0: [sdb] No Caching mode page found
[ 3.131620] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.133630] scsi 5:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 3.133878] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3.134033] sd 5:0:0:1: Attached scsi generic sg4 type 0
[ 3.134175] sd 5:0:0:2: Attached scsi generic sg5 type 0
[ 3.134315] sd 5:0:0:3: Attached scsi generic sg6 type 0
[ 3.531564] random: init urandom read with 117 bits of entropy available
[ 3.534671] sdb: sdb1
[ 3.543009] sd 4:0:0:0: [sdb] No Caching mode page found
[ 3.543013] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.543016] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.591311] random: nonblocking pool is initialized
[ 10.162977] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 10.163725] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[ 12.122174] Adding 5115900k swap on /dev/sda7. Priority:-1 extents:1 across:5115900k FS
[ 12.953503] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 13.053247] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 13.273689] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.273697] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 13.440963] systemd-udevd[391]: starting version 204
[ 13.555911] lp: driver loaded but no devices found
[ 13.561159] parport_pc 00:05: reported by Plug and Play ACPI
[ 13.561216] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 13.569148] ppdev: user-space parallel port driver
[ 13.590227] intel_rng: FWH not detected
[ 13.618719] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPR2 1 (20131115/utaddress-251)
[ 13.618728] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.620770] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 13.621296] leds_ss4200: no LED devices found
[ 13.634238] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 13.634242] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.634244] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 13.634246] mono: mono_out=0x0
[ 13.634247] inputs:
[ 13.634249] Rear Mic=0x1a
[ 13.634251] Front Mic=0x1e
[ 13.634253] Line=0x1b
[ 13.639130] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.639241] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.639447] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 13.639564] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 13.640119] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 13.640600] hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
[ 13.640603] hda-intel 0000:04:00.1: Using LPIB position fix
[ 13.640647] snd_hda_intel 0000:04:00.1: irq 45 for MSI/MSI-X
[ 13.642957] hda-intel 0000:04:00.1: Enable sync_write for stable communication
[ 13.651247] HDMI ATI/AMD: no speaker allocation for ELD
[ 13.651325] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input10
[ 13.660233] lp0: using parport0 (interrupt-driven).
[ 13.674771] coretemp coretemp.0: Using relative temperature scale!
[ 13.674784] coretemp coretemp.0: Using relative temperature scale!
[ 13.674799] coretemp coretemp.0: Using relative temperature scale!
[ 13.674814] coretemp coretemp.0: Using relative temperature scale!
[ 13.675914] sd 5:0:0:2: [sde] Attached SCSI removable disk
[ 13.676864] sd 5:0:0:3: [sdf] Attached SCSI removable disk
[ 13.775714] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 13.910159] type=1400 audit(1422206487.389:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=525 comm="apparmor_parser"
[ 13.910169] type=1400 audit(1422206487.389:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser"
[ 13.910175] type=1400 audit(1422206487.389:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[ 13.910727] type=1400 audit(1422206487.389:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser"
[ 13.910735] type=1400 audit(1422206487.389:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[ 13.911020] type=1400 audit(1422206487.389:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[ 13.911145] type=1400 audit(1422206487.389:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=523 comm="apparmor_parser"
[ 13.911153] type=1400 audit(1422206487.389:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser"
[ 13.911160] type=1400 audit(1422206487.389:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="apparmor_parser"
[ 13.911714] type=1400 audit(1422206487.389:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser"
[ 15.279460] init: failsafe main process (678) killed by TERM signal
[ 15.463100] Bluetooth: Core ver 2.17
[ 15.463153] NET: Registered protocol family 31
[ 15.463155] Bluetooth: HCI device and connection manager initialized
[ 15.463173] Bluetooth: HCI socket layer initialized
[ 15.463176] Bluetooth: L2CAP socket layer initialized
[ 15.463182] Bluetooth: SCO socket layer initialized
[ 15.468038] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.468043] Bluetooth: BNEP filters: protocol multicast
[ 15.468056] Bluetooth: BNEP socket layer initialized
[ 15.475781] Bluetooth: RFCOMM TTY layer initialized
[ 15.475798] Bluetooth: RFCOMM socket layer initialized
[ 15.475807] Bluetooth: RFCOMM ver 1.11
[ 15.773529] init: cups main process (787) killed by HUP signal
[ 15.773544] init: cups main process ended, respawning
[ 17.182869] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 17.183323] atl1c 0000:01:00.0: atl1c: eth1 NIC Link is Up<100 Mbps Full Duplex>
[ 17.187801] 8139too 0000:03:02.0 eth0: link down
[ 17.187858] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.188559] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.168364] Non-volatile memory driver v1.3
[ 20.707896] init: plymouth-upstart-bridge main process ended, respawning
[ 20.717215] init: plymouth-upstart-bridge main process (1571) terminated with status 1
[ 20.717232] init: plymouth-upstart-bridge main process ended, respawning
[ 23.681780] HDMI ATI/AMD: no speaker allocation for ELD
[ 23.980032] HDMI ATI/AMD: no speaker allocation for ELD
[ 24.280035] HDMI ATI/AMD: no speaker allocation for ELD
[ 24.580032] HDMI ATI/AMD: no speaker allocation for ELD
[ 24.880044] HDMI ATI/AMD: no speaker allocation for ELD
[ 25.180034] HDMI ATI/AMD: no speaker allocation for ELD
[ 25.480031] HDMI ATI/AMD: no speaker allocation for ELD
[ 25.780032] HDMI ATI/AMD: no speaker allocation for ELD
[ 26.080035] HDMI ATI/AMD: no speaker allocation for ELDHors ligne
#10 Le 25/01/2015, à 19:21
- nam1962
Re : [Résolu] Temps démarrage PC trop long.
Merci pour son utilisation 
Bon, perso je ne vois rien d'anormal dans ton dmesg.. Mais un plus expert en démarrage verra peut-être objet à amélio...
Ça met juste un peu de temps à chopper un HDD externe si je comprends bien.
As-tu essayé le pilote additionnel pour ta GPU ?
[ Modéré ]
Hors ligne
#11 Le 25/01/2015, à 19:48
- dz50
Re : [Résolu] Temps démarrage PC trop long.
Dans "logiciels et mises à jour", il n'y a pas de pilote additionnel. Où puis-je trouver celui qui conviendrait ?
Hors ligne
#12 Le 25/01/2015, à 19:51
- metalux
Re : [Résolu] Temps démarrage PC trop long.
Désolé, j'en avais oublié le sujet de départ avec la question d'alca94 
Le dmesg indique quand même un temps anormalement long (environ 7 sec) concernant cette ligne:
[ 3.591311] random: nonblocking pool is initializedFait des recherche en ce sens, le peu que j'ai trouvé concernerait le noyau utilisé mais je n'en suis pas sûr.
Hors ligne
#13 Le 25/01/2015, à 20:02
- nam1962
Re : [Résolu] Temps démarrage PC trop long.
Il n'y a pas forcément besoin de pilote additionnel 
Que donne le retour de
lspci | grep "VGA compatible controller"Dernière modification par nam1962 (Le 25/01/2015, à 20:55)
[ Modéré ]
Hors ligne
#14 Le 25/01/2015, à 20:51
- nany
Re : [Résolu] Temps démarrage PC trop long.
Bonjour,
metalux a écrit :
Désolé, j'en avais oublié le sujet de départ avec la question d'alca94
Le dmesg indique quand même un temps anormalement long (environ 7 sec) concernant cette ligne:[ 3.591311] random: nonblocking pool is initializedFait des recherche en ce sens, le peu que j'ai trouvé concernerait le noyau utilisé mais je n'en suis pas sûr.
D’après ce que j’ai pu trouver sur le net, il semblerait que la cause soit plutôt due à cette ligne :
[ 2.812124] Switched to clocksource tscCommandes à tester :
sudo sed -i 's/quiet splash/quiet splash tpm_tis.force=1/' /etc/default/grub
sudo update-grubEt voir s’il y a une amélioration au redémarrage.
En ligne
#15 Le 25/01/2015, à 20:56
- Zurg
Re : [Résolu] Temps démarrage PC trop long.
Moi j'ai exactement le même problème de temps de démarrage sauf que c'est exactement dans le sens inverse : mon pc est trop rapide a démarrer ! 
Avant j'avais le temps de boire un café, je pouvais voir le logo au démarrage mais c'est fini tout ça, maintenant qu'il prend seulement 5 secondes pour aller jusqu'au bureau, j'ai plus le temps de faire autre chose a coté !
Hors ligne
#16 Le 25/01/2015, à 21:25
- metalux
Re : [Résolu] Temps démarrage PC trop long.
Je suis tombé sur la même solution que nany en faisant des recherches sur random: nonblocking pool is initialized et effectivement Switched to clocksource tsc semble en être la cause.
Teste les commandes de nany en priorité.
Hors ligne
#17 Le 25/01/2015, à 21:47
- dz50
Re : [Résolu] Temps démarrage PC trop long.
Merci à tous de l'intérêt porté à mon problème.
@ nany, la commande suggérée ne rend pas de réponse.
top @ top-desktop ~
└─ $ ▶ sudo sed -i 's/quiet splash/quiet splash tpm_tis.force=1/' /etc/default/grub
[sudo] password for top:
top @ top-desktop ~
└─ $ ▶ sudo update-grub
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-3.13.0-45-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-45-generic
Image Linux trouvée : /boot/vmlinuz-3.13.0-40-generic
Image mémoire initiale trouvée : /boot/initrd.img-3.13.0-40-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Windows 7 (loader) trouvé sur /dev/sda1
faitDernière modification par dz50 (Le 25/01/2015, à 21:49)
Hors ligne
#18 Le 25/01/2015, à 21:49
- nany
Re : [Résolu] Temps démarrage PC trop long.
Oui, c’est normal, ça veut dire qu’il n’y a pas eu d’erreur et que le texte a bien été changé.
Tu peux passer la seconde commande.
EDIT : ah ben tu as édité pendant que je postais. Y a plus qu’à voir ce que ça donne au redémarrage.
Dernière modification par nany (Le 25/01/2015, à 21:55)
En ligne
#19 Le 26/01/2015, à 08:05
- dz50
Re : [Résolu] Temps démarrage PC trop long.
Le démarrage est maintenant semblable à mes autres PC.
Merci encore.
Hors ligne
#20 Le 29/01/2015, à 13:14
- ngmsky
Re : [Résolu] Temps démarrage PC trop long.
Bonjour chers utilisateurs d'ubuntu. J'ai pratiquement le même probleme lenteur (extreme) de demarrage. J'attends environ 2 minutes et 30 secondes pour pouvoir utiliser ma machine alors que j'ai un PC sous i7 (8 coeurs à 3,2Gh avec 8Go de RAM en DDR3-1600Mhz et DD sata3).
Je n'arrive pas à corriger le probleme même en tapant les commandes données ici.
SI vous le pouvez, je vous prie de me donner un coup de main, svp.
Voici le lien de mon sujet : http://forum.ubuntu-fr.org/viewtopic.php?pid=19040351http://forum.ubuntu-fr.org/viewtopic.php?pid=19040351
NB : je me suis permis de passer par ce poste parce que :
- le probleme est similaire au mien
- le probleme est déja resolu
- et surtout parce que vous semblez bien connaitre le systeme ubuntu
Merci d'avance pour votre intervention et votre sympathie.
A bientôt
Dernière modification par ngmsky (Le 29/01/2015, à 13:21)
Saphire pure black X58-ICH10R / intel i7-960 - 3.20Ghz / 8Go DDR3-1600Mhz / DD 2To Sata3.0 / Ubuntu 14.04 64bits
- Tu es un être unique car Dieu ne fait pas de photocopie; Tu es un être rare. Or tout ce qui est rare a de la valeur !
- A quoi ça te servirait de gagner toute la terre et ses trésors si tu perd ton âme ?
- Cherche à connaître et obéir à La "Vérité" en lisant les évangiles.
Hors ligne
#21 Le 22/03/2015, à 20:26
- moissan
Re : [Résolu] Temps démarrage PC trop long.
inxi -F ne marche pas du premier coup : mon ordinateur repond : Le programme « inxi » n'est pas encore installé. Vous pouvez l'installer en tapant :
sudo apt-get install inxi
et il suffit de le faire pour que ça marche
Hors ligne
#22 Le 07/08/2019, à 15:23
- rogn...
Re : [Résolu] Temps démarrage PC trop long.
signalé